Nibco T-585-S6-R-66-LL Two-Pie...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$198.87
Nibco T-585-S6-R-66-LL Two-Piece Stainless Steel Ball Valve - Full Port

Nibco T-585-S6-R-66-LL Two-Piece Stainless Steel Ball Valve - Full Port

(No reviews yet) Write a Review

Model: NL95X0A

In Stock (leaves warehouse same day if ordered before 3pm ET)

$198.87
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
The NIBCO® ball valve provides ease of operation with quarter-turn (90 degrees) open to close. The reinforced PTFE seat ring and stainless steel ball/stem exhibits high chemical resistance properties and is recommended for process piping. This valve features threaded ends for easy installation. Please refer to NIBCO technical data sheets, valve selection guides, chemical resistance guide and catalog for engineering and installation information. Choose NIBCO® ball valves for the most specified, versatile and economical valve option in commercial and industrial applications. NIBCO® ball valves are backed by the exclusive NIBCO INC. 5-year 125% limited warranty.

  • Valve pressure rating 1,000 psi 69 bar non-shock cold working pressure
  • Maximum temperature rating 400-DegreeF
  • Full port
  • Blowout-proof stem
  • Stainless steel ball and stem
  • Cast ISO mounting pad
  • Vented ball
  • Locking lever handle
  • Threaded end connections
  • Conforms to MSS SP-110

Two-Piece Carbon Steel and Stainless Steel Ball Valves IOM Manual

Manufacturer Resources

Product Specs

All Application(s):
Lead-Free
All Basic Material:
Stainless Steel
Classification:
Stainless Steel Ball Valves
End Connection:
Threaded
Product Group:
Valve
Seat Seal Material:
RPTFE (Reinforced)
Type of Valve:
Ball Valve
Valve Ball Operator:
CS Locking Lever Handle
Valve Ball Port Style:
Full Port
Valve Ball Stem Material:
SS - Stainless Steel
Valve End Connection Type:
T -- Female NPT Thread (FIPT)
Valve Pressure Rating (CWP):
1000 PSI / 69 Bar CWP
Valve Trim Package:
Stainless Steel Trim
Product Subgroup:
Tees
Product Type:
Stainless Steel Ball Valves
Department:
Plumbing

Nibco NL95X0A – Frequently Asked Questions

1) Will a Nibco T-585-S6-R-66-LL ball valve thread onto my existing NPT pipe, or do I need adapters?
The T-585-S6-R-66-LL has female NPT threaded ends (FIPT) on both sides, so it screws directly onto male NPT pipe nipples or threaded pipe ends in the matching size. No soldering, no grooving, no flanges. Sizes run 1/4, 3/8, 1/2, 3/4, 1 and 2 inch, and the valve size must match the pipe size, you are not adapting up or down inside the valve.
2) Is the Nibco T-585-S6-R-66-LL full port, and will it restrict flow in a pump or process line?
Full port. The ball bore matches the nominal pipe size, so a 1 inch valve passes a full 1 inch opening with essentially no throttling of the line. That is what you want ahead of a pump suction, on a metering or sample line, or anywhere you plan to run a pig or brush through. A standard port valve would neck the flow down at the ball, this one does not.
3) Is this stainless ball valve OK for potable water, and is it lead-free?
The T-585-S6-R-66-LL is listed as a lead-free application valve, with a stainless steel body, ball and stem and stainless trim, so there is no brass or bronze wetted component to carry lead. That is what makes it usable on drinking water lines in a building where the code requires lead-free, as well as on the process piping it is more commonly specified for.
4) Should I use a stainless ball valve or a bronze one on a chemical process line?
Go stainless when the media attacks copper alloys, when you are on a washdown or corrosive-atmosphere line, or when the spec calls for an all stainless wetted path. The T-585 is stainless body, ball and stem with a reinforced PTFE seat, a combination Nibco recommends for process piping because of its chemical resistance. Bronze ball valves are the cheaper choice on ordinary building water and compressed air, where corrosion is not the issue. If the line is corrosive or the fluid is aggressive, the bronze valve is the false economy.
5) What does the vented ball on the Nibco T-585 do, and when do I need it?
The ball is vented, meaning a small hole relieves fluid trapped in the ball cavity back to one side of the valve when it is closed. That matters on liquids that expand when warmed, including cryogenic and volatile service, where a sealed cavity can build enough pressure to damage the seats. It also makes the valve directional in the sense that the vent relieves toward one port, so install it with flow oriented per Nibco's instructions rather than dropping it in either way without checking. The stem is blowout-proof, so line pressure cannot push it out of the body if the packing is disturbed.
6) Can I replace an existing two-piece threaded ball valve with a Nibco T-585 without repiping?
If what is coming out is a two-piece threaded ball valve of the same nominal size with female NPT ends, this drops into the same union or nipple arrangement, since the T-585-S6-R-66-LL is a two-piece body with FIPT ends. The catch is face-to-face length, which is not the same across valve makes and patterns, so on a rigid run with no union you may need to cut and re-thread. Measure the old valve end to end before you pull it. A soldered, grooved or flanged valve is not a swap, that is a repipe.
7) Is a Nibco T-585 a quarter-turn valve, and how much clearance do I need for the handle?
Quarter-turn, 90 degrees from full open to full closed. Plan the swing before you set the valve in place, the lever sweeps a quarter circle in the plane perpendicular to the pipe and it is the handle, not the body, that hits the wall or the adjacent line in a tight mechanical room. On the larger 2 inch size that lever is long. If clearance is genuinely a problem, mount the valve so the handle swings into open space, or use the ISO pad for a gear or actuator instead.
8) What are the seats made of in the Nibco T-585, and does that limit the service temperature?
Reinforced PTFE (RPTFE) seat rings against a stainless ball. The reinforcement is what lets the seat carry the 1,000 PSI cold working pressure and reach the 400 degree F maximum temperature rating, plain PTFE would cold flow well before that. RPTFE is also the reason this valve holds up on chemical service where an elastomer seat would swell or degrade. Remember the pressure and temperature limits are not simultaneous, full pressure is a cold rating.
How fast can I get the Nibco NL95X0A delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Nibco NL95X0A come with a warranty?
Absolutely. The Nibco NL95X0A is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Nibco NL95X0A?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Nibco NL95X0A from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!