Nibco T-751-A Strainer - Iron,...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$34.09
Nibco T-751-A Strainer - Iron, Wire Mesh Screen, Threaded Ends

Nibco T-751-A Strainer - Iron, Wire Mesh Screen, Threaded Ends

(No reviews yet) Write a Review

Model: NLT1006

In Stock (leaves warehouse same day if ordered before 3pm ET)

$34.09
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
The strainer is a "Y" type with a branch angled off the flow path. It features a tapped screw-in bonnet with blow-off plug for screen maintenance. The strainers are equipped with female threaded end connections for easy installation. Please refer to NIBCO technical data sheets, chemical resistance guides and catalogs for engineering and installation information. Choose NIBCO® valves for the most specified, versatile and economical valve option in commercial, mechanical and industrial applications. NIBCO® strainers are backed by the NIBCO 5-year 125% limited warranty.

  • 125 psi/8.6 bar saturated steam to 353-DegreeF/178-DegreeC
  • 200 psi/13.8 bar non-shock cold working pressure
  • 20-mesh stainless steel wire screen
  • Tapped cap with plug
  • Class 250 threaded end connections
  • Dezincification resistant
  • Conforms to ANSI B1.20.1

Manufacturer Resources

Spec Sheet

Product Specs

All Basic Material:
Cast Iron
Classification:
Iron Strainers
End Connection:
Threaded
Product Group:
Strainer
Type of Valve:
Strainer
Valve End Connection Type:
T -- Female NPT Thread (FIPT)
Product Type:
Iron Strainers
Department:
Plumbing

Nibco NLT1006 – Frequently Asked Questions

1) What pipe sizes does the Nibco T-751-A Y-strainer come in, and how does it connect to the piping?
The T-751-A is offered in 1/2 inch and 2 inch. Both connect with female NPT threaded ends (FIPT), Class 250 threaded, conforming to ANSI B1.20.1. So you thread it onto male pipe nipples, no flanges or welding. Order codes are NLT1006 for the 1/2 inch and NLT100D for the 2 inch.
2) Can I use this Nibco iron Y-strainer on a steam line?
Yes. The T-751-A is rated 125 psi (8.6 bar) saturated steam to 353 degrees F (178 degrees C), and 200 psi (13.8 bar) non-shock cold working pressure. That covers typical low pressure commercial steam heating service as well as cold water and general mechanical piping.
3) Can the screen be cleaned without cutting the strainer out of the line?
Yes. The body is a Y pattern with a tapped screw-in bonnet and a blow-off plug, so you can pull the cap to remove and clean the screen in place, or pipe the tapped plug port to a blow-down valve and flush it without opening the line. Leave clearance below the branch for the cap to come off.
4) How fine is the screen in the T-751-A, and what does it actually catch?
It uses a 20-mesh stainless steel wire screen, which traps scale, weld slag, pipe chips and coarse sediment ahead of pumps, control valves and coils. That is a general protection mesh, not a fine filtration element, so if you are protecting something needing finer particle removal you want a dedicated filter downstream.
5) Does the T-751-A have to be installed a particular way around?
It is a Y pattern strainer, so the branch angles off the flow path and must point downward or horizontally on a horizontal run so debris collects in the pocket rather than falling back into the line. Flow direction follows the body casting, and the threaded female ends make either orientation straightforward to pipe.
6) What is the body made of on the Nibco T-751-A strainer?
Cast iron body with a stainless steel wire screen, and the strainer is dezincification resistant. Cast iron suits commercial HVAC hydronic and steam service; for potable water service you would look at a bronze or stainless body instead.
7) Do I need a separate shutoff to service a Y-strainer like this one?
The T-751-A is a strainer only, not a valve, so it does not isolate flow. Plan isolation valves on each side if you want to pull the screen without draining the system. The tapped cap and blow-off plug let you flush the pocket between cleanings with the line still up.
How fast can I get the Nibco NLT1006 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Nibco NLT1006 come with a warranty?
Absolutely. The Nibco NLT1006 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Nibco NLT1006?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Nibco NLT1006 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!