Non Armoured Cable Gland
BCG-1002 - spec sheet
Features
- Low profile compact cable glands
- Good corrosion resistance
- Wide cable clamping range
BCG-1002 - spec sheet
Manufacturer Resources
Product Specs
- Colour:
- Natural colour
- Wire Size:
- 18 to 25 Millimeters
- Degree Of Protection Ip:
- IP68
- Etim:
- EC000441 Cable screw gland
- Inner Dimensions Inches:
- 7.09x3.54x3.54
- Inner Quantity:
- 10
- Material Quality:
- Brass
- Nema Rating:
- NEMA 4
- Nominal Thread Size Inch Gas Pipe Thread:
- 1 inch
- Operating Temperature:
- -20-+100°C
- Outer Dimensions Inches:
- 3.94x15.75x11.02
- Outer Quantity:
- 10
- Product Group:
- Wiring Devices
- Standards:
- cULus, RoHS, WEEE, LVD
- Suitable For Cable Diameter:
- 18 - 25mm
- Surface Protection:
- Nickel-plated
- Temperature Rating:
- -20 to +100 Degrees C
- Thread Length:
- 13mm
- Thread Type:
- NPT
- Unspsc:
- 39121431 Cable gland connector
- Weight Uom:
- 0.02 lbs. Each
- Department:
- Electrical
- Product Subgroup:
- Cord Grips
- Product Type:
- Cable Gland
- Product Model:
- Straight
- Product Finish:
- Nickel plated
- Product Details:
- Non Armoured Cable Gland
- Product Color:
- Metallic
- Product Material:
- Metal
Thomas & Betts BCG-1002 – Frequently Asked Questions
1) Is this cable gland rated for wet or washdown locations?
Yes. The BCG-1002 carries an IP68 degree of protection and a NEMA 4 rating, so it is suited to dust-tight and water-immersion duty and to hosedown or washdown enclosures. The seal rating only holds if the cable diameter is inside the 18 to 25 mm clamping range and the NPT thread is made up tight.
2) Can I use the BCG-1002 gland on armoured cable or MC cable?
No. This is a non-armoured cable gland, so it clamps and seals on the cable jacket only. It provides no armour clamp and no continuous earth path through armour. For interlocked armour, teck, or MC cable you need a dedicated armoured gland or MC connector.
3) Is the Thomas & Betts BCG-1002 gland approved for use in the US and Canada?
It is listed to cULus and also carries RoHS, WEEE and LVD compliance, so it is recognized for both US and Canadian installations and meets EU substance and low voltage directives. That matters for institutional and government specs that call for dual-agency listing.
4) What is the BCG-1002 made of, and will it hold up in a corrosive or outdoor environment?
The body is brass with a nickel-plated finish, which gives it good corrosion resistance outdoors and in damp plant areas. It is a metallic, natural-colour finish rather than a painted or plastic one, so it is a reasonable match for steel or aluminium enclosures.
5) Do Thomas & Betts BCG-1002 glands come individually or in a box quantity?
They are packed 10 per inner carton and 10 per outer, so a full pack is a multiple of 10. Useful to know if you are standardizing a panel shop or an MRO crib rather than buying a single replacement.
How fast can I get the Thomas & Betts BCG-1002 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Thomas & Betts BCG-1002 come with a warranty?
Absolutely. The Thomas & Betts BCG-1002 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Thomas & Betts BCG-1002?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Thomas & Betts BCG-1002 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.