Non Armoured Cable Gland
SCG-1002 - spec sheet
Features
- Excellent corrosion resistance
- Ideal for wet locations
- Low profile compact cable glands
- Wide cable clamping range
SCG-1002 - spec sheet
Manufacturer Resources
Spec Sheet
Product Specs
- Colour:
- Natural colour
- Wire Size:
- 18 to 25 Millimeters
- Degree Of Protection Ip:
- IP68
- Etim:
- EC000441 Cable screw gland
- Inner Dimensions Inches:
- 7.09x3.54x3.54
- Inner Quantity:
- 10
- Material Quality:
- Stainless steel V4A
- Nema Rating:
- NEMA 4
- Nominal Thread Size Inch Gas Pipe Thread:
- 1 inch
- Operating Temperature:
- -20-+100°C
- Outer Dimensions Inches:
- 3.94x15.75x11.02
- Outer Quantity:
- 10
- Product Group:
- Wiring Devices
- Standards:
- cULus, RoHS, WEEE, LVD
- Suitable For Cable Diameter:
- 18 - 25mm
- Surface Protection:
- Untreated
- Temperature Rating:
- -20 to +100 Degrees C
- Thread Length:
- 13mm
- Thread Type:
- NPT
- Unspsc:
- 39121431 Cable gland connector
- Weight Uom:
- 0.02 lbs. Each
- Department:
- Electrical
- Product Subgroup:
- Cord Grips
- Product Type:
- Cable Gland
- Product Model:
- Straight
- Product Details:
- Non Armoured Cable Gland
- Product Color:
- Metallic
- Product Material:
- Metal
Thomas & Betts SCG-1002 – Frequently Asked Questions
1) What cable diameter range does the Thomas & Betts SCG-1002 cable gland clamp?
The SCG-1002 clamps cable from 18 to 25 mm outside diameter. Anything thinner than 18 mm will not seal properly in the compression ring, and anything over 25 mm won't enter the body, so measure the jacket OD, not the conductor bundle, before you order.
2) What size and type of thread does the SCG-1002 cable gland have, and will it thread into a standard enclosure hub?
It's a 1 inch NPT thread with 13 mm of thread length. That mates with a 1 inch NPT tapped hub or a 1 inch NPT locknut and bushing through a punched box. Metric-tapped enclosures need an adapter, since NPT and metric gland threads are not interchangeable.
3) Can I use this cable gland outdoors or in a washdown area?
Yes. The SCG-1002 is rated IP68 and NEMA 4, so it handles dust, driven rain, and hose-directed water at the entry point. It's a wet-location gland by design. The enclosure it goes into has to carry the same rating for the assembly to hold up.
4) Is this cable gland suitable for armoured cable or MC?
No. The SCG-1002 is a non-armoured cable gland. It grips and seals on the outer jacket only, with no armour clamp or earthing cone, so it won't terminate SWA, MC, or interlocked armour. For armoured cable you need a gland with an armour clamping ring and a bonding path.
5) Is the SCG-1002 gland approved for use in the US and Canada?
It carries cULus, meaning it's recognized for both US and Canadian installations, and it's also RoHS, WEEE, and LVD compliant. That combination is what a facility or institutional buyer typically needs to standardize a gland across sites on both sides of the border.
6) What temperature range can this stainless cable gland be installed in?
Rated -20 to +100 degrees C. That covers unheated outdoor runs in cold climates as well as hot equipment rooms, motor terminal boxes, and boiler plant. The upper figure is a continuous rating for the gland and its seal, so match it against the cable jacket rating too, which is often the lower of the two.
7) Is this a straight cable gland or a 90 degree elbow entry?
Straight body. The cable enters the enclosure in line with the thread, so allow bend radius clearance behind the gland if the cable has to turn immediately. The description also calls it a low profile compact gland, which helps where the entry sits close to adjacent equipment.
8) How are Thomas & Betts SCG-1002 cable glands packaged for a bulk order?
They come packed 10 to a box, with 10 per outer as well. Useful if you're stocking a van or setting a panel shop up with a standing quantity rather than buying singles.
How fast can I get the Thomas & Betts SCG-1002 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Thomas & Betts SCG-1002 come with a warranty?
Absolutely. The Thomas & Betts SCG-1002 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Thomas & Betts SCG-1002?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Thomas & Betts SCG-1002 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.