You may also like
NON-INS PRL SPLICE, 16-14, CMA 2,05
Manufacturer Resources
Product Specs
- Country Of Origin:
- United States (US)
- Product Subgroup:
- Splices
- Product Type:
- Non-Insulated Parallel Splice
- Standards:
- UL E9809
- Voltage Rating:
- 600 V
- Department:
- Electrical
- Product Group:
- Wire Termination
- Product Color:
- Metallic
- Product Material:
- Copper
Sta-Kon B14-PS-M – Frequently Asked Questions
1) What wire sizes does the Sta-Kon B14-PS-M parallel splice take?
The B14-PS-M is sized for 16 to 14 AWG stranded copper wire. Both conductors enter the same side of the barrel and run parallel, so it is used to tap or extend a 16 or 14 AWG run rather than to join two wires end to end. Going outside that range means a different barrel size: too small a conductor won't hold under the crimp, too large won't seat.
2) Is the B14-PS-M splice insulated, and do I need to insulate it after crimping?
It is a non-insulated barrel, bare metallic copper with no sleeve. You supply the insulation after crimping, typically heat shrink or tape, wherever the splice sits in a circuit that needs covering. If you would rather not add a second step, choose an insulated parallel splice instead.
3) What is the voltage rating on the Sta-Kon B14-PS-M, and can I use it in a 480V panel?
Rated 600 V, which covers 120/208, 277 and 480 V commercial control and power wiring at 16 to 14 AWG. It carries UL file E9809.
4) What is the difference between a parallel splice and a butt splice for 14 AWG wire?
A parallel splice like the B14-PS-M takes both conductors in from the same end, so the two wires lie side by side and exit together. That's what you want for a tap, a pigtail, or a jumper off an existing run. A butt splice takes one wire in each end and is for joining two conductors running in opposite directions. They are not interchangeable in a wire run.
5) How many Sta-Kon B14-PS-M splices come in a pack?
They ship 100 to a pack under part number B14-PS-M, which suits panel build, fixture retrofit, or MRO stocking where you are making repeat 16-14 AWG taps.
6) Are these Sta-Kon splices made in the USA?
Country of origin is the United States, which matters on government and public-institution work carrying domestic sourcing requirements.
How fast can I get the Sta-Kon B14-PS-M delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Sta-Kon B14-PS-M come with a warranty?
Absolutely. The Sta-Kon B14-PS-M is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Sta-Kon B14-PS-M?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Sta-Kon B14-PS-M from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.