3" – 4" Copper No-Calk® 11" x 14.5" base
12404 - spec sheet
Features
- Rated 180°F continuous heat and approved for Type B installations
- Do not use petroleum based products or paint on flashing collar or plastic base Not for hot-mopped or built-up roofs
- Patented All-Flash® design allows use on multiple pipe sizes
- Copper base
- Metal base for pitch from 0-40°
12404 - spec sheet
Manufacturer Resources
Product Specs
- Volume:
- 0.315
- Department:
- Plumbing
- Product Group:
- Plumbing
- Product Subgroup:
- Fittings
- Product Type:
- General Fittings
- Product Weight:
- 1.4
OATEY 12404 – Frequently Asked Questions
1) Will the Oatey 12404 No-Calk flashing fit both 3 inch and 4 inch vent pipe?
Yes. The 12404 uses Oatey's patented All-Flash design, so the one collar seals on multiple pipe sizes across the 3 inch to 4 inch range. You don't need a separate part number for each vent size on the same roof.
2) What roof pitch can the Oatey 12404 copper roof flashing be installed on?
The metal base handles pitch from 0 to 40 degrees, which covers flat decks through steep-slope shingle roofs. Base footprint is 11 by 14.5 inches.
3) Can I use the Oatey 12404 No-Calk flashing on a hot-mopped or built-up roof?
No. The 12404 is not approved for hot-mopped or built-up roofs. Also keep petroleum based products and paint off the flashing collar and the plastic base, both will degrade the seal. For a built-up or modified bitumen roof you need a flashing rated for that assembly.
4) Is the Oatey 12404 flashing rated for a Type B gas vent?
It is approved for Type B installations and rated for 180 degrees F continuous heat, so it suits Type B vent as well as plumbing DWV stacks in that temperature range.
5) Is the base on the Oatey 12404 actually copper, or just copper colored?
It's a copper base with a rubber-style No-Calk collar. Copper is what you want on a copper or standing-seam metal roof where a galvanized or aluminum base would set up galvanic corrosion against the surrounding roofing.
6) What part number should I order for a 3 inch copper roof vent flashing from Oatey?
Order Oatey model 12404. That single number covers the 3 inch through 4 inch copper No-Calk flashing with the 11 by 14.5 inch base, so specify it once for both vent sizes.
7) Do I need to caulk around the collar after installing this Oatey flashing?
No, that's the point of the No-Calk design. The collar seals against the pipe on its own, and adding a petroleum based sealant to the collar or base is specifically warned against.
8) How heavy is the Oatey 12404 copper vent flashing for shipping or a roof load-out?
About 1.4 pounds each, so a bundle of them is easy to carry up a ladder in one trip.
How fast can I get the OATEY 12404 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the OATEY 12404 come with a warranty?
Absolutely. The OATEY 12404 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the OATEY 12404?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the OATEY 12404 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.