OATEY 12803 Aurora™ No-Calk® 1...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$75.71
$25.71

OATEY 12803 Aurora™ No-Calk® 1-1/2"-3" Galvanized Solar Flashing 9.5" x 12.5" Base

(No reviews yet) Write a Review

Model: 12803
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$75.71
$25.71
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
Aurora™ No-Calk® 1-1/2"-3" Galvanized Solar Flashing 9.5" x 12.5" Base
  • Features

    • Self-sealing collar slides over pipe and requires no caulking
    • Do not use petroleum based products or paint on flashing collar or plastic base
    • Not for hot-mopped or built-up roofs
    • For warranty product details, refer to the Oatey Limited Warranty document
    • 1-1/2" to 3" Galvanized Roof Flashing
    • Rated 180°F continuous heat and approved for Type B installations
    • For pitch from 0-40°
    • 24 Gauge 9.5" x 12.5" galvanized steel base

Manufacturer Resources

Product Specs

Volume:
0.075
Department:
Plumbing
Product Group:
Roofing
Product Subgroup:
Flashing and Flanges
Product Type:
Roof Flashing
Product Finish:
Unfinished
Product Material:
Galvanized Steel
Product Weight:
0.8

OATEY 12803 – Frequently Asked Questions

1) What pipe sizes does the Oatey 12803 roof flashing fit?
The Oatey 12803 Aurora No-Calk flashing fits vent pipe from 1-1/2 inch up to 3 inch. The self-sealing collar slides down over the pipe and seals against it, so one part covers the whole range without caulk.
2) What roof pitch can this No-Calk flashing be installed on?
It is rated for pitches from 0 to 40 degrees, so it covers flat decks through roughly a 10:12 slope. Steeper than 40 degrees and you need a different base.
3) Can I use the Oatey 12803 on a hot-mopped or built-up roof?
No. The Aurora No-Calk galvanized flashing is not for hot-mopped or built-up roofs. The collar and plastic base won't tolerate that application, and petroleum-based products and paint must not be applied to either the collar or the base. For a built-up roof, specify a flashing rated for that system instead.
4) Is this flashing rated for a gas appliance vent?
The 12803 is rated for 180 degrees F continuous heat and approved for Type B installations, which is the gas-vent category where a Type B double-wall vent passes through the roof. Keep the service within that 180 F continuous rating.
5) What size and gauge is the base on the Oatey 12803?
The base is 24 gauge galvanized steel measuring 9.5 x 12.5 inches. That gives you enough flange to lap under the course above and over the course below on standard shingle work, and it is heavy enough to nail off without oil-canning.
6) Can I paint the Oatey No-Calk flashing to match the roof?
Don't paint it. The instructions prohibit paint and petroleum-based products on the flashing collar and the plastic base, since they attack the seal material. The part ships unfinished galvanized.
7) Do I need sealant or caulk to install this vent pipe flashing?
No caulk is needed at the pipe. The collar is self-sealing and slides over the pipe to make the seal on its own, which is the point of the No-Calk design. You still fasten and weave the 9.5 x 12.5 inch base into the roof covering the normal way.
8) Is the Oatey 12803 galvanized flashing a one-piece unit or do I order the collar separately?
It is a complete flashing: the 24 gauge galvanized steel base with the self-sealing collar already fitted, ordered as a single item under part number 12803. Listed weight is 0.8 lb per piece, so a bundle of them is easy to carry up a ladder.
How fast can I get the OATEY 12803 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the OATEY 12803 come with a warranty?
Absolutely. The OATEY 12803 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the OATEY 12803?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the OATEY 12803 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.