OATEY 12802 Aurora™ No-Calk® 1...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$75.71
$25.71
OATEY 12802 Aurora™ No-Calk® 1/2 in.-1 in. Solar Aluminum Flashing 9.5 in. x 12.5 in. Base

OATEY 12802 Aurora™ No-Calk® 1/2 in.-1 in. Solar Aluminum Flashing 9.5 in. x 12.5 in. Base

(No reviews yet) Write a Review

Model: 12802
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$75.71
$25.71
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Aurora™ No-Calk® 1/2 in.-1 in. Solar Aluminum Flashing 9.5 in. x 12.5 in. Base

  • Features

    • Not for hot-mopped or built-up roofs
    • Rated 180°F continuous heat and approved for Type B installations
    • Do not use petroleum based products or paint on flashing collar or plastic base
    • For warranty product details, refer to the Oatey Limited Warranty document
    • 1/2 in. to 1-1/2 in. Galvanized Roof Flashing
    • Self-sealing collar slides over pipe and requires no caulking
    • For pitch from 0-40°
    • 28 Gauge 9.5 in. x 12.5 in. galvanized steel base


12802 - spec sheet

Manufacturer Resources

Product Specs

Base Size Diameter:
9.5" X 12.5"
Volume:
0.076
Department:
Plumbing
Product Group:
Roofing
Product Subgroup:
Flashing and Flanges
Product Type:
Roof Flashing
Product Finish:
Unfinished
Product Material:
Aluminum
Product Weight:
0.442

OATEY 12802 – Frequently Asked Questions

1) What roof pitch can the Oatey 12802 Aurora No-Calk flashing be installed on?
It covers pitches from 0 to 40 degrees, so it works on everything from a dead-flat deck to a steep residential slope without a separate pitched version.
2) Can I use this Oatey No-Calk flashing on a hot-mopped or built-up roof?
No. The Aurora No-Calk 12802 is specifically not for hot-mopped or built-up roofs. For those assemblies you need a flashing built for mopping-in rather than this self-sealing collar type.
3) What temperature is this Oatey solar flashing rated for, and can it go on a Type B vent?
Rated for 180 degrees F continuous heat and approved for Type B installations, which is what lets it be used on Type B gas vent penetrations as well as plumbing stacks.
4) Does the Oatey 12802 vent pipe flashing need caulk or sealant at the pipe?
No sealant at the collar. The self-sealing collar slides down over the vent pipe and seals against it, which is the whole point of the No-Calk design, so there is no bead to tool and nothing to re-caulk on a maintenance cycle.
5) How much roof deck does the 12802 flashing base cover, and will it fit under a standard shingle course?
The base measures 9.5 by 12.5 inches, which is the common small-base footprint for residential vent stacks. Lay out your shingle courses around that dimension so the upper edge tucks under and the lower edge laps over the course below.
6) Can I paint the Oatey No-Calk flashing to match the roof color?
Don't. Petroleum based products and paint must not be applied to the flashing collar or the plastic base, as they attack the material and will shorten the life of the seal. It ships unfinished.
7) What part number should I order for the Oatey Aurora No-Calk solar flashing with the 9.5 x 12.5 base?
Order Oatey 12802. That is the manufacturer part number for the Aurora No-Calk solar flashing with the 9.5 by 12.5 inch base, and it is a single-configuration item, so there is no finish or size option to specify.
8) How heavy is the Oatey 12802 flashing for bulk ordering and rooftop staging?
Each unit runs about 0.442 lb, so a case quantity for a multi-family or tract job stages easily by hand on the roof and adds almost nothing to freight weight.
How fast can I get the OATEY 12802 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the OATEY 12802 come with a warranty?
Absolutely. The OATEY 12802 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the OATEY 12802?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the OATEY 12802 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!