Orca Hardware PK1216 Soft Close for 1200 Series Track

The PK1216 is a soft close mechanism that catches the sliding panel near the end of travel and pulls it closed under control instead of letting it slam or bounce back out of the pocket. It is built for the Orca 3-wheel 1200 Series track system, so it goes on a PK1200 Series pocket door track, not on a barn door rail or another maker's track.

No. The PK1216 is track hardware only, the soft close mechanism for the 1200 Series system. The latching and the edge pull are separate purchases. For privacy on a bath or bedroom pocket door, the Rockwood 891 pocket door privacy latch or the Deltana SDL25 (2-1/2 x 2-3/4 inch) covers it; for a passage opening with no locking, the Weslock 0527 rectangular passage pocket door lock does.

Only if the track behind the drywall is an Orca 3-wheel 1200 Series. The PK1216 mounts to that track, so you need access to the head of the pocket, usually through the trim or the panel opening, and the existing hangers have to be the 3-wheel 1200 Series carriers. On a finished wall with an unknown track, expect to pull the panel and identify the track before ordering.

Keep the track side consistent first: every opening you want soft close on has to run the 3-wheel 1200 Series track. On the lock side you can standardize by function across the same trim family, for example the Emtek 2101 passage and Emtek 2102 privacy pocket door locks, both 2-3/8 x 3-1/8 inch, so passage and bath openings take the same prep and the same trim look.