Orca Hardware RDST Series 6' Round Track Kit With Standard Drop Hangers

Both work. The RDST Series round track kit is rated for interior doors at either 1-3/8 or 1-3/4 inches thick, so the standard commercial 1-3/4 slab and the lighter 1-3/8 interior slab both hang on the same hangers. Weight is the other half of the check: the kit carries up to 200 lbs per door.

Wall mount. The RDST round track kit mounts to the wall above the opening, and all fasteners are included along with the track, two hangers, spacers, end stops, door guides and instructions. Standard practice is to land the mounting screws in solid backing, so plan on a header board or blocking if you are hitting drywall between studs.

No handing to specify. The RDST round track kit is non-handed, so the same kit slides the door to the left or the right depending on which side of the opening you set the track. Order the kit by length only.

Round track is the tubular rail with drop hangers that wrap over it, and the flat track is the rectangular strap style. The kit contents differ too: the anti-jump blocks and the connector plate ship only in the flat track kits, so the round track kit comes with the track, two hangers, spacers, end stops, door guides and fasteners. Both are rated at 200 lbs per door and both suit 1-3/8 or 1-3/4 inch interior doors. Pick on looks and on which contents you want.

Standard through bolt hangers, two of them. They bolt through the face of the door rather than screwing into the edge or face only, which is why the kit is limited to 1-3/8 or 1-3/4 inch slabs. Spacers are in the box to set the door off the wall so it clears casing and base.

200 lbs per door is the limit on the RDST kit, and a solid core wood slab at 1-3/4 inches sits comfortably under that at typical interior sizes. Glass is the one to weigh first: the hangers here are through bolt hangers for 1-3/8 or 1-3/4 inch doors, so a glass panel needs hardware made to clamp glass, not this kit.

No, they are in the box. The RDST kit ships with end stops to keep the door on the rail at each end and door guides for the bottom of the slab, plus spacers and all fasteners. What you supply is the door itself and, if there is no solid backing above the opening, a header board to mount the track to.

The RDST round track runs on polymer wheels rather than steel, which is the quieter roll and the reason it gets specified where noise carries. It is a commercial-rated kit in satin stainless, and the door guide included in the box keeps the bottom of the slab from swinging and knocking the wall.

The track is stainless steel in a satin stainless finish, which is the only finish the RDST kit is made in. Stainless handles the humidity of a bath or a kitchen without the pitting you get from plated steel. If you are matching other openings in a building, note there is no black or bronze option in this series.