Orca Hardware RDST Series 8' Round Track Kit With Standard Drop Hangers

Yes. The RDST Series round track kit is built for interior doors at either 1-3/8 or 1-3/4 inches thick, so a standard 1-3/8 inch interior slab hangs without any shimming or special hanger. Those are the two common interior door thicknesses, and the kit covers both with the same through bolt hanger.

200 lbs per door. That covers a typical 1-3/4 inch solid core slab on a single opening. Glass or heavy custom slabs above that weight need a heavier system.

No, it ships as a complete kit: the track, two hangers, spacers, end stops, door guides, all fasteners, and instructions. The hanger supplied is the standard through bolt drop hanger, which bolts through the face of the door rather than mounting to the top edge. The only things you supply are the door itself and, if the wall needs it, backing. Note that anti-jump blocks and the connector plate come in the flat track kits, not the round track kits.

Wall mount. The round track fastens to the wall above the opening, so you need solid backing behind the drywall along the full 8 feet of track, either the existing framing or a mounting board. There is no ceiling mount configuration in this kit.

No handing to specify. The RDST round track kit is non-handed, so the same kit works whether the door parks to the left or the right of the opening. You decide the slide direction at install by which side of the opening you run the track.

Round track gives you a tubular rail with a slimmer contemporary profile, and the RDST kit is the round version. Flat track uses a flat bar rail and the flat track kits add anti-jump blocks and a connector plate for joining track runs. If you are ganging two lengths of track for a long or double opening, the flat track kit is the one with the connector plate. For a single opening on one 8 foot run, the round track does the job.

Stainless steel, in satin stainless. That is the only finish offered on the RDST kit, and it is the one model in this size, so there is no finish option to pick on the order. The stainless substrate holds up in corridors and entries where a painted or plated track scuffs.

Commercial. The RDST round track kit is classed as commercial door hardware, and the polymer wheels are there to keep the roll quiet, which matters in offices, clinics and hospitality where a steel wheel on steel track is audible down the hall. It is still an interior door product, not exterior.

Yes, door guides are in the kit. They fix at the floor or the wall at the bottom of the opening and hold the slab against lateral swing, which is what stops a barn door knocking the base trim. End stops are also included to limit travel at both ends of the 8 foot track.

No. The kit contains two hangers, which is one door's worth, and the round track kits do not include the connector plate used to join track runs. A bypass or double door opening needs a second kit and a track arrangement that supports it, not this single 8 foot run on its own.

The RDST series is a good fit for that. It comes in 6 foot and 8 foot lengths in the same round track and satin stainless finish, so mixed opening widths across a floor still look identical, and every kit is non-handed, so stock does not have to be split by door swing direction. Order by opening width and hang them all off the same standard through bolt hanger.