Paxton Net2 Plus, Single Door ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$710.00
$533.46
Paxton Net2 Plus, Single Door Controller with ABS Plastic Enclosure, Wall Mount, TCP/IP, DHCP, 26 Bit Wiegand, 12-24VDC, UL, FCC

Paxton Net2 Plus, Single Door Controller with ABS Plastic Enclosure, Wall Mount, TCP/IP, DHCP, 26 Bit Wiegand, 12-24VDC, UL, FCC

(No reviews yet) Write a Review

Model: 682-528-US
Selected Voltage is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$710.00
$533.46
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

PPaxton Net2 Plus, Single Door Controller with ABS Plastic Enclosure, Wall Mount, TCP/IP, DHCP, 26 Bit Wiegand, 12-24VDC, UL, FCC

Net2 is a PC based security system for controlling access through doors. Net2 allows users to be given access to particular areas at certain times. Because the system is networked, all administration can be done from a central point. Net2 plus is one of three control units for the Net2 system. It is the most advanced control unit, employing the latest technology and offering huge potential for future expansion. As security technology develops, Net2 plus can take full advantage. Using Net2 plus ensures that the investment in access control is safe no matter how the system requirements change. Net2 plus has on-board TCP/IP to allow direct connection to a computer network. This can save time, money and result in a better, more resilient system. Net2 plus control units can also be connected together using a dedicated RS485 network. This reduces the number of TCP/IP network points required for larger systems.

Features:

  • Total users: 50,000
  • Total doors:
    • Max 500 doors
    • Max 200 per RS485 data line
    • Max 100 TCP/IP connections
  • Number of tokens: 50,000
  • Number of PIN's: 50,000
  • PIN length: 4 - 8
  • Number of codes: 50
  • Code length: 4 - 8
  • Number of time zones: 64
  • Number of time slots: 2,000
  • Number of access levels: 250
  • Stored events per ACU: 2,728
  • Data retention during a total power loss: 28 days
  • Clock and data: Yes
  • Custom Wiegand: Yes
  • Door open time: Min 1 sec - Max 999,999 sec
  • Reader ports per ACU: 2
  • Readers/Keypads per ACU: 4 - check current draw on individual readers
  • Combined reader port output current: 500 mA
  • Software required: Net2 v4.14 and above

Communication:

  • RS485: 200 ACU's per data line
  • TCP/IP Ethernet: ACU has an on-board TCP/IP to RS485 converter
  • TCP/IP nodes: Max 200
  • Data lines per PC: Max 100
  • Ethernet network speed: 10 Mbit/s - 100 Mbit/s auto MDIX
  • Ethernet bandwidth requirement: 200 kbit/s
  • DHCP support (fixed IP recommended): Yes
  • RS485 network speed: 115.2 kbit/s

Hardware:

  • Supply voltage: Min 11V DC - Max 15V DC
  • Supply current: 200 mA
  • Relay switchable voltage: 24V DC
  • Relay switchable current: 4 A
  • Alarm output current: 1 A
  • Operating temperature - battery limits: Min 32°F - Max +131°F
  • Reader cable type: Belden 9540
  • Data cable type: CAT5 or Belden 8723

Manufacturer Resources

Product Specs

Product Subgroup:
Access Management
Subcategory:
Access Management
Number of Codes :
50
PIN/Code Entry:
Yes
Product Group:
Access Control
Product Type:
Door Controller
Series:
Net2
Product Voltage:
12/24VDC
Product Height:
5"
Product Category:
Access Control
Product Width:
4.5'
Department:
Door Hardware
Product Depth:
1"

Paxton Access Inc 682-528-US – Frequently Asked Questions

1) How many doors does a single Paxton Net2 Plus controller handle, and how do I expand to a whole building?
One Net2 Plus ACU controls a single door, with two reader ports so you can run entry and exit readers on that opening. You scale by adding controllers: a Net2 system supports up to 500 doors total, with a maximum of 200 ACUs on one RS485 data line and up to 100 TCP/IP connections. For a 40 door building you buy 40 controllers and network them, not one big panel.
2) Does the Net2 Plus connect straight to my network, or do I need a separate interface?
It has on-board TCP/IP with an integrated TCP/IP to RS485 converter, so it plugs directly into the LAN with no separate network interface box. Ethernet runs 10 to 100 Mbit/s with auto MDIX and needs about 200 kbit/s of bandwidth. DHCP is supported, though a fixed IP is the recommended setup for access control. On bigger jobs you can daisy-chain additional units over RS485 at 115.2 kbit/s off one network point instead of burning a switch port per door.
3) What power supply do I need for a Paxton Net2 Plus door controller?
The board itself runs on 11 to 15V DC and draws 200 mA. Reader ports share a combined 500 mA output, so size the supply for the controller plus every reader and keypad hanging off it. The lock relay switches up to 24V DC at 4 A and the alarm output is rated 1 A, which covers typical maglocks and electric strikes, but the lock current comes from your power supply, not the controller.
4) Will the Net2 Plus work with the Wiegand readers already installed on my doors?
Yes on 26 bit Wiegand, and it also accepts custom Wiegand formats plus clock and data readers, so most existing card reader installs can be reused. Each ACU has two reader ports and supports up to four readers or keypads, subject to current draw on the individual readers against the 500 mA combined reader supply.
5) If the power goes out, does the Net2 controller lose its cardholder data?
No. Data is retained for 28 days through a total power loss, so a weekend outage or a panel left disconnected during a renovation will not wipe the user list. Each controller also buffers 2,728 events locally, which is what keeps the audit trail intact if the network link to the server drops.
6) Do I need Paxton software to run these controllers, and what version?
Net2 is a PC based system, so the controllers are administered from Net2 software on a server or workstation rather than programmed at the door. This unit requires Net2 v4.14 or above. If you are adding to an older site still running earlier software, plan the upgrade as part of the job.
7) Can I use keypad PIN entry instead of cards with the Paxton Net2 Plus?
PIN and code entry are both supported. The system holds up to 50,000 PINs with a length of 4 to 8 digits, plus 50 shared door codes, also 4 to 8 digits. That lets you run credential-free entry for a tenant space or mix cards and PINs on the same door.
8) How big is the Net2 Plus enclosure and where can I mount it?
It is a wall-mount ABS plastic enclosure measuring 5 inches high, 4.5 inches wide and 1 inch deep, small enough for a closet backboard or above-ceiling mount near the door. Keep it inside the conditioned envelope: the operating range is 32 to 131 degrees F, so an unheated vestibule or exterior wall is the wrong location.
9) What cable should I pull for the readers and the RS485 run on a Net2 install?
Reader cable is specified as Belden 9540. For data, use CAT5 or Belden 8723. Pulling the right cable matters on the reader home runs because the 500 mA combined reader supply leaves no headroom for voltage drop on undersized wire.
10) Can Net2 handle scheduling, like unlocking a lobby during business hours and restricting contractors after hours?
That is what the time zone structure is for. Net2 supports 64 time zones with 2,000 time slots and 250 access levels, across up to 50,000 users and 50,000 tokens. Door open time is adjustable from 1 second to 999,999 seconds, so the same controller can do a short momentary release on a tenant door or a long timed unlock on a lobby.
11) What is the difference between Net2 Plus and the other Net2 control units?
Net2 Plus is the top of the three Net2 control units. The distinguishing feature is on-board TCP/IP, letting it sit directly on the data network instead of requiring an RS485 run back to a converter at the PC. On a multi-building or multi-floor site that usually means fewer cable pulls and a more resilient system, and Plus units can still be chained over RS485 where you want to limit the number of network points used.
How fast can I get the Paxton Access Inc 682-528-US delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Paxton Access Inc 682-528-US come with a warranty?
Absolutely. The Paxton Access Inc 682-528-US is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Paxton Access Inc 682-528-US?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Paxton Access Inc 682-528-US from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!