Paxton Net2 Plus, Single Door Controller with Metal Enclosure, PoE+ PSU, Wall Mount, TCP/IP, DHCP, 26 Bit Wiegand, 12-24VDC, UL, FCC

Paxton Net2 Plus, Single Door Controller with Metal Enclosure, PoE+ PSU, Wall Mount, TCP/IP, DHCP, 26 Bit Wiegand, 12-24VDC, UL, FCC

Net2 plus is a networked access control system. A networked system gives the advantages of central control, event reporting and flexible control over users' access. Each control unit is part of a network but can run independently making its own decisions and remembering events. One Net2 plus control unit can be the network interface to the LAN and also run a wired RS485 daisy chain of other Net2 plus or Net2 classic units, removing the need for an independent TCP/IP to RS485 converter. Net2 plus is available with 12/24V power supply AC DC, power over Ethernet (POE), or trigger disconnect power supply for, which is suitable for fire alarm disconnect. PoE is a technology that allows both power and data to be passed along Ethernet cabling. Net2 plus with PoE simply plugs straight into the existing LAN using a standard RJ45 plug (providing it is powered by either a PoE switch or a PoE injector). Control units are sold as a PCB board only or within a plastic housing. The Net2 plus unit now comes with PoE+ power supply in metal/plastic cabinet; no separate mains supply back-up required.

Features:

• Single door networkable access control unit
• Plug into a TCP/IP network using a standard RJ45 plug
• Net2 plus can replace a TCP/IP convertor
• Net2 plus can also connect using RS485
• Net2 plus, Net2 classic and Net2 nano control units can be mixed on a site
• Diagnostic LEDs
• FLASH memory allows easy upgrades
• Use Paxton Access or 3rd party readers