You may also like
ROCKWOOD Y106 Door Pulls with Base Plates
Material: Brass;
Finishes: UD26D;
Fastner: 1/4 - 20 x 2-1/2" thru bolt & finish washer (standard 1-3/4" door);
Options:
- Back to back mounting in pairs — use BTB suffix and mounting type number (107BTB5)
- Concealed mounting single pulls — use C suffix and mounting type number (107C6)
- Advise if door thickness is other than 1-3/4"
- See page B13 for mounting selection (standard duty 1/4 - 20)
- 2-1/2" Barrier Free clearance — use BF prefix (BF107)
ROCKWOOD OVERVIEW
Rockwood products are normally used on all types of institutional buildings, offices, retail, educational, detention, sports facilities, hotel and restaurant, and finer residences.
ENVIRONMENTAL MANAGEMENT
ASSA ABLOY is commited to protecting the quality of the environment as well as the health and safety of its employees, customers, and the community. Please see our Environmental Health and Safety Policy for details on how we are dedicated to this commitment.
RESOURCES & DOWNLOADS
Manufacturer Resources
Product Specs
- Product Group:
- Door Trim and Accessories
- Clearance:
- 1-7/8"
- Subcategory:
- Push and Pull Plates, Door Pulls
- Product Subgroup:
- Door Pulls, Push and Pull Plates
- Product Type:
- Door Pulls
- ANSI/BHMA:
- ANSI A156.6, J401
- Commercial/Residential:
- Commercial
- Product Model:
- 108
- (CTC) Center-to-Center:
- 10"
- Product Projection:
- 2-5/8"
- Product Category:
- Door Trim and Accessories
- Department:
- Door Hardware
Rockwood 108 US32D – Frequently Asked Questions
1) What is the hand clearance on the Rockwood 108 pull, and is it enough for a gloved hand?
Clearance behind the bar is 1-7/8 inches with a total projection of 2-5/8 inches off the door face. That is standard commercial grip room, workable gloved but tight. If you need more knuckle room, Rockwood builds a 2-1/2 inch barrier free clearance version using the BF prefix (BF107).
2) Can the Rockwood 108 be mounted back to back with a pull on the other side of the door?
Yes, and it changes the part number. Back to back pairs use the BTB suffix with the mounting type number (for example 107BTB5). For a single pull with no bolt heads showing on the opposite face, order the concealed mounting version with the C suffix and mounting type number (107C6). Pick the mounting arrangement before you order, since the fasteners differ between them.
3) What is the closest alternative to the Rockwood 108 if I want the same 3/4 inch straight bar from another brand?
The Ives 8102HD is the nearest match on bar size: a heavy duty straight pull with a 3/4 inch round bar and 1-1/2 inch clearance, so it grips the same but sits slightly tighter to the door than the 108's 1-7/8 inches. If you want a fatter bar, the Ives 8103HD is a 1 inch round straight pull with through bolt mounting and the ABH AB3300 is a 1 inch diameter straight flat end pull. Bar diameter changes the feel in the hand more than anything else on a pull.
4) What is the closest straight door pull to the Rockwood 108 with a 3/4 inch round bar?
The Ives 8102HD heavy duty straight door pull uses the same 3/4 inch round bar and is rated heavy duty, with 1-1/2 inch clearance. The Rockwood 108 straight door pull carries 1-7/8 inch clearance and a 2-5/8 inch projection with a 10 inch center-to-center spacing, so the grip standoff differs even though the bar diameter matches.
5) The Rockwood 108 is straight - what do I use if the opening needs an offset pull?
For an offset grip, the ABH AB3310 is an offset flat end door pull in a surface mount commercial configuration, the ABH AB3330 is an offset round end pull with custom length options, and the Ives 8169 is a C style offset solid pull at 1 inch diameter with heavy duty mounting. The Ives 8145EZHD is a 45 degree offset pull with heavy duty mounting hardware and is ADA compliant. The Rockwood 108 is a straight pull with a 2-5/8 inch projection.
6) I need a pull for both sides of the door - is the Rockwood 108 sold that way?
The Rockwood 108 is ordered back to back in pairs using the BTB suffix with the mounting type number. If you would rather buy a set that ships as a pair, the Deltana SSPOBB24 is a 24 inch back-to-back modern offset door pull set, the Deltana SSPORBB24 is a 24 inch back-to-back round offset set, and the Deltana OHP620 is an off-set handle pull back-to-back set for 1-1/8 inch to 1-3/8 inch doors.
7) The Rockwood 108 is set up for 1-3/4 inch doors - what pull suits a thinner residential door?
The Deltana OHP620 off-set handle pull back-to-back set is specified for doors 1-1/8 inch to 1-3/8 inch thick. The Rockwood 108 ships with a 1/4-20 x 2-1/2 inch thru bolt and finish washer sized for a standard 1-3/4 inch door, with other thicknesses handled at order time.
8) I need a longer pull than 10 inch center-to-center - what are the options?
The Rockwood 108 is a 10 inch center-to-center straight pull. For longer grips, the Deltana SSP1210 is a 12 inch contemporary pull for single side mounting, the Deltana SSPOBB24 and SSPORBB24 are 24 inch back-to-back offset sets, and the ABH AB3330 offset round end pull is offered with custom length options.
9) Which pull is the one to use when ADA clearance is the deciding factor?
The Ives 8145EZHD 45 degree offset pull is stated ADA compliant with heavy duty mounting hardware. The Rockwood 108 carries 1-7/8 inch clearance as standard and can be ordered with a 2-1/2 inch barrier free clearance by using the BF prefix, for example BF107.
10) Does the Rockwood 108 door pull meet ANSI/BHMA standards for a commercial opening?
It is built to ANSI A156.6, type J401, the standard covering architectural door trim. That is the citation a spec writer or facility buyer wants on a submittal for an institutional or office opening. The 108 is a commercial pull, not a residential decorative one.
11) What finishes does the Rockwood 108 straight pull come in, and will they match my other door hardware?
Two finishes: 628 satin aluminum clear anodized and 630 satin stainless steel. 630 is the common match for stainless push plates, exit device trim, and hinges across a commercial building; 628 matches aluminum storefront and anodized frames. Match the BHMA number on your existing hardware rather than matching by eye, since the two read similarly at a distance but do not blend well side by side on the same opening.
12) Should I use a straight door pull or an offset pull?
A straight pull like the 108 mounts parallel to the door edge and is the usual choice for glass front and storefront doors or a pull/push plate pair on a swing door. An offset pull steps the grip away from the door face, which suits heavier doors and wider grips; ZenSupply carries the ABH AB3310 flat end offset and AB3330 round end offset, and the Ives 8145 45 degree offset in the EZ series. If you specifically need ADA hand clearance, the Ives 8145 is described as ADA compliant, or stay with Rockwood and order the BF barrier free version of this pull.
13) I need a pull and push plate set for the same opening. What pairs with the Rockwood 108?
The 108 is the pull side only, one bar with two thru bolts, so the push side is a separate order. ZenSupply stocks the Trimco 1001-1 heavy duty push plate at 3 by 12 inches, the Trimco 1041 half round push plate at 8 by 16 inches, and the Trimco 1070 Series classic push/pull plates at 3-1/2 by 15 inches. Match the finish designation across both sides so the opening reads as one set.
14) Is the Trimco 1070 push/pull plate a substitute for the Rockwood 108 pull?
No. The Trimco 1070 series is a classic push/pull plate at 3-1/2 inch by 15 inch, and the Trimco 1001-1 is a heavy duty push plate at 3 inch by 12 inch - both are flat plates that mount against the door face. The Rockwood 108 is a straight bar pull with a 10 inch center-to-center mounting spacing and a 2-5/8 inch projection off the door, so it gives a hand grip rather than a push surface.
15) Will the Cal-Royal PUL-175 work in place of a Rockwood 108 straight pull?
The Cal-Royal PUL-175 is a night latch cylinder pull, 3-1/2 inch height, stainless steel - it is prepped to mount around a rim cylinder on a night latch application, not as a general grip. The Rockwood 108 is a straight pull on 10 inch center-to-center spacing with no cylinder cutout, so the two are not interchangeable openings.
16) What is a comparable pull for a restroom door where hands are wet?
The Trimco 1035 Ultimate Restroom Pull is a heavy duty pull built for restroom doors. The Rockwood 108 straight pull meets ANSI A156.6, J401 and comes in 628 satin aluminum clear anodized and 630 satin stainless steel, so it is also a common choice where a wipe-down finish is wanted.
17) Is the Rockwood 108 pull heavy duty enough for a high traffic entrance?
Thru bolting is what carries the load here. The 108 mounts with 1/4-20 standard duty thru bolts that pass fully through the door and land on finish washers, which is why Rockwood pulls hold up on institutional, school, detention, hotel, and retail openings rather than pulling out of the face the way a screw-mounted decorative pull does. For a heavier bar on the same kind of traffic, the Ives 8103HD is a 1 inch round through bolted pull.
18) Is the Trimco 1041 half-round push plate an alternative to a straight pull?
The Trimco 1041 is a heavy duty half-round push plate at 8 inch by 16 inch, meant for the push side of a door where no grip is needed. The Rockwood 108 is a graspable straight bar with a 1-7/8 inch clearance behind it, so on a pull-side opening the plate does not serve the same purpose.
How fast can I get the Rockwood 108 US32D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Rockwood 108 US32D come with a warranty?
Absolutely. The Rockwood 108 US32D is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Rockwood 108 US32D?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Rockwood 108 US32D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.