You may also like
ROCKWOOD 118 Door Pulls
Material: Brass;
Finishes: US26D;
Fastner: 1/4 - 20 x 2-1/4" thru bolt & finish washer (standard 1-3/4" door);
Options:
- Back to back mounting in pairs — use BTB suffix and mounting type number (112BTB5)
- Concealed mounting single pulls — use C suffix and mounting type number (112C6)
- Advise if door thickness is other than 1-3/4"
- Heavy duty versions of most fastening types available – use suffix HD to fastening type number (112BTB5HD)
- See page B13 for mounting selection (standard duty 1/4 - 20)
- 2-1/2" Barrier Free clearance — use BF prefix (BF110)
- See page B27 for mounting selection (standard duty 1/4 - 20)
- Use Y prefix (YBF16) when ordering pulls with base plates, Y plate diameter is 1-1/4"; recommended for use on wood and glass doors.
ROCKWOOD OVERVIEW
Rockwood products are normally used on all types of institutional buildings, offices, retail, educational, detention, sports facilities, hotel and restaurant, and finer residences.
ENVIRONMENTAL MANAGEMENT
ASSA ABLOY is commited to protecting the quality of the environment as well as the health and safety of its employees, customers, and the community. Please see our Environmental Health and Safety Policy for details on how we are dedicated to this commitment.
RESOURCES & DOWNLOADS
Manufacturer Resources
Product Specs
- Product Group:
- Door Trim and Accessories
- Clearance:
- 2"
- Fasteners:
- 1/4 - 20 x 2-1/4" thru bolt & finish washer (standard 1-3/4" door)
- Subcategory:
- Push and Pull Plates, Door Pulls
- Product Subgroup:
- Door Pulls, Push and Pull Plates
- Product Type:
- Door Pulls
- ANSI/BHMA:
- ANSI A156.6, J401
- Commercial/Residential:
- Commercial
- Product Model:
- 118
- (CTC) Center-to-Center:
- 18"
- Product Projection:
- 3-1/2"
- Product Category:
- Door Trim and Accessories
- Product Substrate:
- Stainless Steel
- Department:
- Door Hardware
Rockwood 118-US26D – Frequently Asked Questions
1) Will the Rockwood 118 door pull mount on a 1-3/4 inch door, and what fasteners come with it?
Yes. The 118 ships with 1/4-20 x 2-1/4 inch thru bolts and finish washers sized for a standard 1-3/4 inch door. Thru-bolt mounting means the pull anchors through the door rather than into screw threads in the face, which is what holds up on a high-traffic entry. If your door is anything other than 1-3/4 inches thick, the fastener length has to change, so specify the actual thickness when you order.
2) What is the hole spacing on the Rockwood 118 pull, and will it cover an existing pull's holes?
The 118 is drilled 18 inches center to center. If the pull you are replacing is also on 18 inch centers with 1/4-20 thru bolts, it drops into the existing holes. Anything else, and you are drilling a new pattern in the door, so measure the old bolt spacing before you order.
3) How much hand clearance does the Rockwood 118 pull give, and is 2 inches enough for gloved hands?
Clearance behind the 1 inch diameter bar is 2 inches, with a total projection of 3-1/2 inches off the door face. Two inches is workable bare-handed but tight with heavy work gloves. Rockwood builds a 2-1/2 inch barrier free clearance version of its straight pulls under a BF prefix if you need more room behind the grip.
4) Does the Rockwood 118 pull meet ANSI/BHMA for commercial door pulls?
It is built to ANSI A156.6, type J401, the standard covering architectural door trim. Combined with its commercial-duty rating, that is the reference a spec writer or facility standard usually calls out for a pull on an institutional opening.
5) How do I order Rockwood 118 pulls back to back on a glass or wood door?
For a pair mounted back to back through the door, add the BTB suffix plus the mounting type number. For a single pull with the fasteners hidden, use the C suffix with the mounting type number. On wood and glass doors Rockwood recommends ordering with base plates using the Y prefix, which adds a 1-1/4 inch diameter plate at each end to spread the load over the door face.
6) What is the closest equivalent to a Rockwood 118 straight door pull in a 1 inch round bar?
The Ives 8103HD is the nearest match in form: a heavy duty straight door pull in 1 inch round stock with through bolt mounting, the same fastening approach the Rockwood 118 uses with its 1/4 - 20 x 2-1/4 inch thru bolt and finish washer for a standard 1-3/4 inch door. Both are straight bar pulls rather than offset. The ABH AB3300 is also a straight pull in 1.00 inch diameter, so a spec calling for a plain 1 inch straight commercial pull can be met from any of the three.
7) What should I use instead of a straight door pull when the opening needs an offset handle?
A straight pull like the Rockwood 118 runs parallel to the door face with a 2 inch clearance and 3-1/2 inch projection. Where the opening calls for an offset instead, the ABH AB3310 is an offset flat end pull and the ABH AB3330 is an offset round end pull with custom length options. The Ives 8169 is a C style offset solid pull in 1 inch diameter, matching the 118 bar diameter while changing the geometry.
8) Which door pull should I specify when the opening has to be ADA compliant?
The Ives 8145 is a 45 degree offset door pull described as ADA compliant in the EZ series, with heavy duty mounting hardware. The Rockwood 118 is a straight pull with 2 inch clearance; where a barrier free clearance is required, Rockwood publishes a 2-1/2 inch barrier free option ordered with a BF prefix. Both routes exist, and the Ives 8145EZHD is the one that changes the handle geometry as well as the clearance.
9) Can I use a Deltana OHP620 pull on a 1-3/4 inch commercial door?
The Deltana OHP620 off-set handle pull back-to-back set is listed for a door thickness range of 1-1/8 inch to 1-3/8 inch. A standard 1-3/4 inch commercial door falls outside that range. The Rockwood 118 ships with 1/4 - 20 x 2-1/4 inch thru bolt and finish washer sized for a standard 1-3/4 inch door, and Rockwood asks to be advised when door thickness is other than 1-3/4 inch.
10) What is the Rockwood 118 pull actually made of, and will it hold up outdoors or in a wet area?
The bar is stainless steel in a 626 satin chrome finish. Stainless handles the moisture and cleaning chemicals you get on pool doors, kitchens, locker rooms, and restroom entries better than a plated base metal, and satin chrome hides fingerprints and scratch marks on a door people touch all day.
11) Straight pull or offset pull on a commercial entrance, which should I use?
A straight pull like the Rockwood 118 is a single bar parallel to the door with 2 inches of clearance behind it, and it is the plain answer for a full-height entry or a pair of doors where you just need a grip. An offset pull steps the grip away from the door and gives a more natural wrist angle, which is why they show up on heavier doors and accessible openings. If that is what you are after, the Ives 8145 is a 45 degree offset pull and the Ives 8169 is a C style offset in the same 1 inch diameter.
12) Can I use the Rockwood 118 pull on a 1-3/8 inch residential door?
Not as supplied. The thru bolts that come with it are 1/4-20 x 2-1/4 inch, cut for a 1-3/4 inch door, and Rockwood asks you to advise any other thickness so the mounting is set up correctly. For thinner doors, the Deltana OHP620 back-to-back offset pull is specified for 1-1/8 to 1-3/8 inch doors.
13) Will an 18 inch Rockwood 118 pull fit the narrow stile of an aluminum storefront door?
The bar is 1 inch in diameter and mounts on 18 inch centers running vertically, so the stile only has to be wide enough for the 1 inch bar and its thru bolts, not for the 18 inch dimension. On a glass door, order it with base plates using the Y prefix, which puts a 1-1/4 inch plate under each post to spread the clamping load, since that is what Rockwood recommends for glass and wood.
14) If I need a heavier duty version of a 1 inch straight pull, what changes?
The Rockwood 118 is supplied with standard duty 1/4 - 20 through bolt fastening, and heavy duty versions of most fastening types are available by adding the HD suffix to the fastening type number. On the Ives side, the 8103HD is a 1 inch round straight pull carried as heavy duty with through bolt mounting, so the heavier build is the base configuration rather than a suffix.
15) What do I pair with a door pull on the push side of the opening?
A pull like the Rockwood 118 handles the pull side only. For the push side, the Trimco 1001-1 is a heavy duty push plate at 3 inch by 12 inch, and the Trimco 1041 is a half-round push plate at 8 inch by 16 inch. The Trimco 1070 series comes as classic push/pull plates at 3-1/2 inch by 15 inch, which combines both functions on one plate rather than using a bar pull.
16) I need a longer back-to-back pull set than 18 inch center-to-center. What are my options?
The Rockwood 118 is an 18 inch center-to-center pull and can be ordered back to back in pairs using the BTB suffix with a mounting type number. For a longer run, the Deltana SSPOBB24 is a 24 inch back-to-back modern offset door pull set and the Deltana SSPORBB24 is a 24 inch back-to-back round offset set. Both are offset rather than straight, so the handle geometry changes along with the length.
17) What is the difference between the Rockwood 118 and an ABH AB3300 straight pull?
Both are 1 inch diameter straight commercial pulls. The Rockwood 118 is stainless steel, comes on 18 inch centers with 2 inches of clearance and a 3-1/2 inch projection, and is built to ANSI A156.6 J401. The ABH AB3300 is the same flat end straight form in a 1 inch diameter from the AB3300 Series. Where you need a smaller grip, ABH's AB7200 is a solid stainless through-bolt pull at 7/8 inch diameter instead of 1 inch.
18) Is a Cal-Royal PUL-175 an alternative to a straight door pull?
No, it fills a different role. The Cal-Royal PUL-175 is a night latch cylinder pull, 3-1/2 inch in height, in stainless steel construction, sized to sit at a cylinder rather than to serve as a full-length door pull. The Rockwood 118 is a straight pull at 18 inch center-to-center with a 3-1/2 inch projection. If the door needs a grip for opening rather than trim at a night latch cylinder, the 118 is the pull.
19) Which pull is built for a restroom door?
The Trimco 1035 Ultimate Restroom Pull is a heavy duty pull made for that application. The Rockwood 118 is a general commercial straight pull at 18 inch center-to-center in stainless steel, used across institutional buildings, offices, retail, educational, detention, sports facilities, hotel and restaurant work. Where the restroom door is the specific opening, the 1035 is the purpose-built choice.
How fast can I get the Rockwood 118-US26D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Rockwood 118-US26D come with a warranty?
Absolutely. The Rockwood 118-US26D is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Rockwood 118-US26D?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Rockwood 118-US26D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.