You may also like
ROCKWOOD 111 Door Pulls
Material: Aluminum, brass, bronze, stainless steel;
Finishes: Available in standard architectural finishes;
Fastner: 1/4 - 20 x 2-1/4" thru bolt & finish washer (standard 1-3/4" door);
Options:
- Back to back mounting in pairs — use BTB suffix and mounting type number (112BTB5)
- Concealed mounting single pulls — use C suffix and mounting type number (112C6)
- Advise if door thickness is other than 1-3/4"
- Heavy duty versions of most fastening types available – use suffix HD to fastening type number (112BTB5HD)
- See page B13 for mounting selection (standard duty 1/4 - 20)
- 2-1/2" Barrier Free clearance — use BF prefix (BF110)
- See page B27 for mounting selection (standard duty 1/4 - 20)
- Use Y prefix (YBF16) when ordering pulls with base plates, Y plate diameter is 1-1/4"; recommended for use on wood and glass doors.
ROCKWOOD OVERVIEW
Rockwood products are normally used on all types of institutional buildings, offices, retail, educational, detention, sports facilities, hotel and restaurant, and finer residences.
ENVIRONMENTAL MANAGEMENT
ASSA ABLOY is commited to protecting the quality of the environment as well as the health and safety of its employees, customers, and the community. Please see our Environmental Health and Safety Policy for details on how we are dedicated to this commitment.
RESOURCES & DOWNLOADS
Manufacturer Resources
Product Specs
- Product Group:
- Door Trim and Accessories
- Clearance:
- 2"
- Fasteners:
- 1/4 - 20 x 2-1/4" thru bolt & finish washer (standard 1-3/4" door)
- Subcategory:
- Push and Pull Plates, Door Pulls
- Product Subgroup:
- Door Pulls, Push and Pull Plates
- Product Type:
- Door Pulls
- ANSI/BHMA:
- ANSI A156.6, J401
- Commercial/Residential:
- Commercial
- Product Model:
- 112
- (CTC) Center-to-Center:
- 12"
- Product Projection:
- 3-1/2"
- Product Category:
- Door Trim and Accessories
- Product Substrate:
- Stainless Steel
- Department:
- Door Hardware
Rockwood 112 US28 – Frequently Asked Questions
1) Will the Rockwood 112 door pull mount on a 1-3/4 inch door, and what if my doors are thicker?
Standard mounting on the 112 is sized for a 1-3/4 inch door: it ships with 1/4-20 x 2-1/4 inch thru bolts and finish washers. That is the common commercial door thickness, so most openings take it as supplied. If your doors are anything other than 1-3/4 inches, say so when you order so the fastener length is matched. Thru-bolt mounting means the bolt passes through the door, so length is the only variable that has to change.
2) What is the hole spacing on the Rockwood 112 pull, and will it cover my existing pull holes?
The 112 is drilled 12 inches center to center, with a 1 inch diameter round bar and a 3-1/2 inch overall projection off the face of the door. If the pull you are replacing was also bored at 12 inches CTC, the new holes line up with the old ones. Anything else and you are drilling fresh holes, since a straight pull has no rose or plate to hide old prep unless you order it with base plates.
3) I need pulls on both sides of the door. How do I order the Rockwood 112 back to back?
Add the BTB suffix plus the mounting type number, so a back-to-back pair reads 112BTB5. For a single pull with fasteners hidden from the face, use the C suffix with the mounting number instead (112C6). Heavy duty versions of most fastening types are available by adding HD on the end, for example 112BTB5HD. Ordering two single 112 pulls is not the same thing as a BTB set, since the back-to-back version shares the through fasteners.
4) Can the Rockwood 112 pull be used on a glass or wood door?
Use the base plate version on wood and glass doors. Order it with a Y prefix, which adds a base plate of 1-1/4 inch diameter under each end of the bar to spread the load across the door face. The plain 112 thru bolts directly through the door with a finish washer, which is fine on a hollow metal or solid core commercial door but not what Rockwood recommends for glass or wood.
5) What is the closest equivalent to the Rockwood 112 from another brand?
For a straight 1 inch round bar pull, the ABH AB3300 is the direct counterpart, a straight flat end pull in the same 1 inch diameter. The Ives 8103HD is a 1 inch round straight pull with through bolt mounting, so it fits the same thru-bolt approach the 112 uses. If you want a lighter bar, the ABH AB7200 is solid stainless at 7/8 inch diameter, and the Ives 8102HD uses a 3/4 inch round bar with 1-1/2 inch clearance, which is half an inch less hand room than the 112's 2 inches.
6) What is the closest 1 inch round straight door pull to the Rockwood 112?
The Ives 8103HD is the nearest match: a heavy duty straight door pull with a 1 inch round bar and through bolt mounting, the same bar diameter and the same straight profile as the Rockwood 112. The Rockwood 112 is stainless steel with 1/4 - 20 x 2-1/4 inch thru bolts and finish washers for a standard 1-3/4 inch door, so both hang on a through bolted door in the same way. Confirm center to center against the 12 inch CTC of the 112 before you order.
7) The straight pull hits the frame on my opening. What offset pull should I use instead?
An offset pull moves the grip away from the mounting posts and clears tight stile and frame conditions that a straight bar like the Rockwood 112 will not. The Ives 8169 is a C style offset solid pull at 1 inch diameter with heavy duty mounting, matching the 1 inch grip of the 112. The Ives 8145EZHD is a 45 degree offset pull with heavy duty mounting hardware, ADA compliant, from the EZ series. On the ABH side, the AB3310 is an offset flat end pull for commercial grade surface mount and the AB3330 is an offset round end pull with custom length options.
8) Is the ABH AB3300 a substitute for the Rockwood 112?
The ABH AB3300 is a straight flat end pull handle at 1.00 inch diameter for commercial doors, so it matches the Rockwood 112 on grip diameter and on the straight run of the bar. The difference is the end treatment: the AB3300 is a flat end pull, while the Rockwood 112 is a straight pull built to ANSI A156.6, J401. Match center to center to the 12 inch CTC of the 112 and confirm the fastening for your door thickness.
9) My doors are thinner than 1-3/4 inch. Is there a pull rated for a thinner door?
The Rockwood 112 ships with 1/4 - 20 x 2-1/4 inch thru bolts and finish washers sized for a standard 1-3/4 inch door, and the ordering instruction is to advise if door thickness is other than 1-3/4 inch. If you want a pull already set up for a thinner leaf, the Deltana OHP620 off-set handle pull is supplied as a back-to-back set for a door thickness range of 1-1/8 inch to 1-3/8 inch.
10) How much hand clearance does the Rockwood 112 pull give behind the bar?
Two inches of clearance between the bar and the door face, with the pull projecting 3-1/2 inches overall. Two inches is enough for a gloved hand on most openings. If your facility standard calls for more room behind the grip, Rockwood builds a 2-1/2 inch barrier free clearance version, ordered with a BF prefix.
11) Does the Rockwood 112 pull meet ANSI/BHMA, and what type is it?
The 112 is built to ANSI A156.6, type J401, which is the architectural door trim standard covering pulls. That is the line a spec writer or institutional buyer looks for on a submittal. It is a commercial-duty item, the sort of trim that goes on schools, hospitals, offices, hotels and detention work rather than a residential cabinet pull.
12) What finishes does the Rockwood 112 straight pull come in?
Three finishes: 630 satin stainless steel, 628 clear anodized aluminum, and 313 dark bronze anodized aluminum. The 630 is the one that matches most commercial door hardware already hanging in an institutional building, and it is the stainless substrate version. The two anodized options are aluminum, so pair them with aluminum storefront trim rather than trying to match brushed stainless levers.
13) Straight pull or offset pull, which should I put on an entry door?
A straight pull like the Rockwood 112 mounts parallel to the door edge and gives a clean grip with 2 inches of clearance. An offset pull angles the grip away from the door face, which some people prefer on heavy doors where you pull at an angle. If offset is what the drawing calls for, the ABH AB3310 flat end and AB3330 round end offset pulls cover that, and the Ives 8169 is a C style offset in the same 1 inch diameter as the 112. For a 45 degree offset, the Ives 8145 EZ series is the one.
14) Is the Rockwood 112 heavy enough for a high traffic door, and is there a stronger version?
The 112 is a commercial pull built to ANSI A156.6 J401, with a 1 inch bar and standard duty 1/4-20 thru bolt mounting. For an entrance that takes constant abuse, Rockwood offers heavy duty versions of most fastening types, ordered by adding HD to the fastening type number. The bar itself does not change, the mounting does, which is where a pull on a heavily used door normally fails first.
15) Will one Rockwood 112 pull work on a 1-1/8 inch thick door?
The 112's standard fastener package is cut for a 1-3/4 inch door, so a thinner door needs the fastener length called out when the order is placed. If you are working on thinner doors as a rule, the Deltana OHP620 offset handle pull is a back-to-back set specified for 1-1/8 to 1-3/8 inch doors and is the simpler fit there. For 1-3/4 inch commercial doors, the 112 as supplied is the straightforward choice.
16) Do the Rockwood 112 pull's mounting screws show on the other side of the door?
With standard mounting, yes. The 112 uses a 1/4-20 thru bolt with a finish washer, so the fastener passes through the door and is visible on the opposite face. If you need a clean back face, order the concealed mounting version with the C suffix and mounting type number, for example 112C6. On a door getting pulls on both sides anyway, the BTB back-to-back version handles it, since the two pulls bolt to each other through the door.
17) I want a pull and push combination for a pair of doors instead of pulls on both leaves. What should I look at?
The Rockwood 112 is a pull only, mounted with 1/4 - 20 x 2-1/4 inch thru bolts and finish washers, and it can be ordered back to back in pairs with the BTB suffix and mounting type number. If you want a push side instead, the Trimco 1001-1 is a heavy duty push plate at 3 inch by 12 inch, the Trimco 1041 is a half-round push plate at 8 inch by 16 inch, and the Trimco 1070 series classic push/pull plates come at 3-1/2 inch by 15 inch. The 3 inch by 12 inch Trimco 1001-1 shares the 12 inch dimension with the 12 inch CTC of the 112.
18) I need a longer offset pull than 12 inches for an entrance door. What are the options?
The Deltana SSPOBB24 is a 24 inch back-to-back modern offset door pull and the Deltana SSPORBB24 is a 24 inch back-to-back round offset door pull, both supplied as back-to-back sets for a full glass or entrance leaf. The ABH AB3330 offset round end pull is offered with custom length options if 24 inches is not the length you need. All three depart from the 12 inch CTC and straight profile of the Rockwood 112.
19) Is the Cal-Royal PUL-175 an alternative to the Rockwood 112?
No. The Cal-Royal PUL-175 is a night latch cylinder pull, 3-1/2 inch height, stainless steel construction -- it mounts over a rim cylinder on a night latch and is not a two post through bolted door pull. The Rockwood 112 is a straight door pull at 12 inch CTC mounted with 1/4 - 20 x 2-1/4 inch thru bolts and finish washers. They serve different openings and are not interchangeable.
20) What material is the Rockwood 112 pull, and which finish do I pick for an exterior door?
Stainless steel is the substrate on the 112, offered in 630 satin stainless. The other two options, 628 clear anodized and 313 dark bronze anodized, are aluminum. On a coastal or heavily weathered exterior opening, stainless is the material that holds up; anodized aluminum is the usual match for aluminum storefront framing where the color has to line up with the door.
How fast can I get the Rockwood 112 US28 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Rockwood 112 US28 come with a warranty?
Absolutely. The Rockwood 112 US28 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Rockwood 112 US28?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Rockwood 112 US28 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.