Schlage Electronics PR10 Netwo...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$217.00
$138.40
Schlage Electronics Schlage Electronics PR10 Networked Proximity Reader - Mini Mullion, 125 kHz Proximity Card, Black PR10

Schlage Electronics PR10 Networked Proximity Reader - Mini Mullion, 125 kHz Proximity Card, Black

(No reviews yet) Write a Review

Model: PR10

In Stock (leaves warehouse same day if ordered before 3pm ET)

$217.00
$138.40
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

PR10 Proximity Mini-Mullion Reader

The legacy PR10 proximity reader is compatible with 125 kHz low frequency credentials and can be used for lower security applications. It features a compact, unobtrusive design for easy installation in tight spaces.  

 

SPECIFICATIONS

  • Physical dimensions (HxWxD):  4.26″ x 1.72″ x 0.81″
  • Frequency:  125 kHz
  • System interface: Wiegand
  • Power:  5-16 VDC
  • Operating temperatures:  -31° to 151°F (-35°  to 67° C)
  • LED (red, green, or amber) visual indicator and audio feedback 
  • Material:  PBT Polymer

 

FEATURES

Technology

  • Reads 125 kHz proximity and 13.56 MHz smart credentials - MIFARE Classic® and MIFARE® DESFire® EV1, EV2 and EV3 as well as card serial number (CSN) of other manufacturer's smart credentials
  • Wiegand and RS-485 output available for simple interface with most access control panels
  • Compatible with NFC-open smart phones using Schlage mobile credentials

Simplicity

  • There are 5 available models to fit any need (keypad, magnetic stripe)
  • Compatible with Schlage and other industry manufacturers’ credentials
  • Limited lifetime warranty

Installation

  • Accommodates interior, exterior, metal and non-metal installation environments
  • Quick-connect cable allows for easy installation
  • Easy-to-install mounting bracket

 

DOWNLOADS

Category information

Product information

Technical resources

Manufacturer Resources

Product Specs

Subcategory:
Readers & Credentials
Features:
Reduced Model Lineup and One Size Fits All Reader Offering Limits Complexity
Commercial/Residential:
Commercial
Electronic:
Yes
Product Type:
Readers
Mounting Location:
Mullion Mounting
Product Group:
Electronic Access Controls
Product Subgroup:
Readers, Keypads and Credentials
Product Voltage:
5 to 16 VDC
Product Category:
Electronic Access Control
Department:
Door Hardware

Schlage Electronics PR10 – Frequently Asked Questions

1) Will the Schlage PR10 mini-mullion reader fit on a narrow aluminum door mullion?
That is exactly what the PR10 is built for. It measures 4.26 x 1.72 x 0.81 inches, so the 1.72 inch face fits on the narrow vertical mullion of a storefront or aluminum glass door where a full-size wall reader will not sit flat. Mullion mounting is the intended location, and the housing is PBT polymer, so it holds up on interior or exterior openings and mounts on metal or non-metal substrates.
2) What credentials does the Schlage PR10 proximity reader read?
The PR10 reads 125 kHz low frequency proximity credentials only. If your site has moved to 13.56 MHz smart cards or mobile credentials, this reader will not read them and you want a smart-card reader instead. It is the right pick when you are extending or repairing an existing 125 kHz prox population and do not want to reissue cards.
3) Will the PR10 reader work with my existing access control panel?
The PR10 outputs Wiegand, which is the interface nearly every access control panel accepts on its reader ports. There is no proprietary panel requirement, so it drops onto an existing Wiegand reader run as long as the panel supplies reader power in range.
4) Is the Schlage PR10 reader suitable for a high security opening?
No. The PR10 is a legacy 125 kHz proximity reader and Schlage positions it for lower security applications, because 125 kHz prox credentials are not encrypted the way 13.56 MHz smart credentials are. Use it on interior offices, storage, amenity rooms, and similar doors; for a data room, cash office, or pharmacy, specify a smart credential reader instead.
5) What can I use instead of the Schlage PR10 if the card reader has to mount on a flat wall surface rather than a narrow mullion?
The Schlage PR10 is built for mullion mounting, with a compact 4.26 in x 1.72 in x 0.81 in body sized to sit on a narrow stile. When the reader is going on a flat wall surface instead, the Securitron R100 is a surface mounted card reader and is the one to look at for that opening. The two are aimed at different mounting conditions, so confirm which surface the reader lands on before ordering.
6) Is the Securitron R100 a drop-in replacement for a Schlage PR10 proximity reader?
No. The Securitron R100 is a wireless surface mounted card reader, while the PR10 is a wired reader that takes 5 to 16 VDC and sends credential data to the panel over a Wiegand interface. Swapping one for the other changes how the reader connects back to the access control system, not just the faceplate, so the existing cable run and panel input have to be part of the decision.
7) Can a proximity reader be mounted outside in freezing or high heat conditions?
The PR10 is rated from -31 to 151 degrees F (-35 to 67 C), which covers exterior gates, parking structures, and unconditioned loading areas in most North American climates. Its accommodation of interior, exterior, metal and non-metal environments is part of the same spec.
8) Which reader should I spec for a commercial access control opening where I already have wire pulled to the door frame?
The Schlage PR10 suits that case. It is a commercial reader powered at 5 to 16 VDC with a Wiegand output to the panel, and it reads 125 kHz proximity credentials. The Securitron R100, from the RH100 series, is a wireless reader, which is the direction to go when pulling cable to the frame is the obstacle rather than the plan.
9) Does the user get any feedback at the reader when a card is presented?
Yes on both counts: the PR10 has an LED indicator that shows red, green, or amber plus an audible tone. For a property manager that means a tenant can tell a valid read from a denied one at the door without calling the office, and for a technician it makes troubleshooting a wiring or panel issue faster.
10) What comes with the PR10 for mounting, and is it a commercial grade reader?
The PR10 ships as a commercial product with a mounting bracket and a quick-connect cable, so the mullion install is bracket, snap the cable, and terminate at the panel. Order the card credentials separately; the reader does not include them.
How fast can I get the Schlage Electronics PR10 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schlage Electronics PR10 come with a warranty?
Absolutely. The Schlage Electronics PR10 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schlage Electronics PR10?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schlage Electronics PR10 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!