Schlage PM050 Grade 1 Entrance...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$854.00
$533.64
Schlage PM050 Grade 1 Entrance/Office Mortise Lock, Standard Cylinder - Selena Lever

Schlage PM050 Grade 1 Entrance/Office Mortise Lock, Standard Cylinder - Selena Lever

(No reviews yet) Write a Review

Model: PM050P SELA 626
$854.00
$533.64
Selected Finish is
Selected Lever Style is
Selected Cylinder is
Selected Rose/Escutcheon Design is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$854.00
$533.64
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Schlage PM050 Grade 1 Entrance/Office Mortise Lock, Standard Cylinder - Selena Lever

Overview

Grade 1, Mortise Locks Purpose-built to serve the commercial real estate, retail, multifamily and hospitality industries, Schlage Performance Series™ locks feature exceptional quality and style at a highly competitive price point. The PM Series offers 26 functions, including three electrified, and four mortise deadbolt functions, all made to meet Schlage’s rigorous quality standards. With popular levers and finish options, Schlage's full key system security line up, and its durable design, you can meet needs for both security and style. They are made to suite with other Allegion products to present a quality, complete door hardware solution and provide a consistent user experience throughout your building or complex. Better yet, you can suite the PM Series mortise locks with the PT Series tubular locks, as they share lever and rose styles.

 

PM050 - Entrance/Office Lock

  • Key cylinder outside; thumbturn inside; latchbolt and deadlocking auxiliary latch
  • Latchbolt retracted by lever from either side
  • Outside lever is made inoperative by key outside or by turning inside thumbturn
  • Key outside unlocks outside lever and retracts latchbolt
  • Rotating inside thumbturn unlocks outside lever; turning inside lever retracts latchbolt but does not unlock
  • Inside lever always free for immediate egress

 

Chassis

  • Case: Cold Rolled Steel (CRS) with corrosion resistant zinc dichromate plating
  • Case size: 4-7/16" x 6-1/16" x 1" (113 mm x 154 mm x 25 mm) Note: PM and L Series case and cover holes differ.
  • Spacing: lever to cylinder 3-7/8" (98 mm);  lever to thumbturn hub 2-11/16" (68 mm)
  • Door thickness: 1-3/4" (44 mm) standard; 1-3/8" (35 mm) minimum; fits doors up to 2-1/2" thick - specify door thickness if  over 1-3/4" and position in door (Available EE only)                                     
  • Field reversible handing

 

Trim Options

  • 10 lever designs made of zinc
  • N escutcheons: 7-7⁄8” x 2-1⁄2” x 7⁄16” (200 mm x 64 mm x 11 mm); wrought brass
  • Roses: A 2-1/8" (54 mm), B 2-9/16" (65 mm), C 2-5/8" (67 mm) - brass
  • Thumbturn style is ADA qualified

 

Latches, Armors, Strikes

  • Backset: 2-3/4" (70 mm) only
  • Armor: Standard - 1-1⁄4" x 8" x 7⁄32" (32 mm x 203 mm x 6 mm); Optional - 1-1⁄16" x 8" x 7⁄32"  (27 mm x 203 mm x 6 mm) 
  • Deadbolt: 1" (25 mm) throw stainless steel 
  • Latch: 3⁄4" (19 mm) throw stainless steel with anti-friction tongue
  • Strike: ANSI curved lip strike 1-1⁄4" x 4-7⁄8" (32 mm x 124 mm) standard; dust box included
  • Strike lip length: 1-3⁄16" (30 mm); optional strike lip lengths - 7⁄8", 1", 1-1⁄2", 1-3⁄4", and 2"  

 

DOWNLOADS & RESOURCES

Product Information

 

Related Product Information

 

Technical Resources

 

Manufacturer Resources

Product Specs

Subcategory:
Mortise Locks
Product Group:
Mechanical Locks
Series:
PM Series
Function Description:
Levers only-both sides; latchbolt only; Latchbolt retracted by lever from either side at all times
Grade:
Grade 1
Keyed Function:
Non-Keyed
Handle Type:
Lever
Standard Strike:
10-072 1-1/4" x 4-7/8" Square Corner Strike, Box (1-3/16" Lip Length)
Warranty:
3 Year Limited
Keyed:
No
ANSI/BHMA:
F01
Product Subgroup:
Mortise Locks and Trim
Product Type:
Mortise Locks
Commercial/Residential:
Commercial
Lock Type:
Mortise
Lock Function:
Passage
IMAP Policy:
Yes
Product Attribute:
Mortise Locks
Electronic:
No
Product Model:
PM050
Product Function:
Passage/Hall/Closet
Door Hand Direction:
Field Reversible
Door Thickness Range:
1-3/4"
Product Category:
Mechanical Locks
Backset (Distance):
2-3/4"
Department:
Door Hardware

Schlage PM050P SELA 626 – Frequently Asked Questions

1) What backset does the Schlage PM050 mortise lock use, and will it work in an existing mortise pocket?
One backset only: 2-3/4 inches. The PM Series mortise case measures 4-7/16 x 6-1/16 x 1 inch (113 x 154 x 25 mm), so the pocket has to be cut for that. Worth knowing before you swap one in: PM and L Series case and cover holes differ, so a PM050 does not simply drop into a door prepped with L Series through-holes without checking the template.
2) Will a Schlage PM050 mortise lock fit a door thicker than 1-3/4 inches?
1-3/4 inch (44 mm) is the standard door thickness for the PM050, with 1-3/8 inch (35 mm) the minimum. It will go into doors up to 2-1/2 inches thick, but on anything over 1-3/4 inches you have to specify the door thickness and the lock's position in the door at the time of order.
3) Do I have to order the Schlage PM050 handed?
No. The PM050 is field reversible, so one lock covers left and right hand openings and you set the handing at install. That is useful for a property manager stocking spares, since a single part number covers every door in the building.
4) What cylinder options do I pick when ordering a Schlage PM050?
Five cylinder choices on the PM050: B less SFIC, J less FSIC, L less conventional 6-pin cylinder, P conventional 6-pin cylinder keyed 5, or T FSIC construction core. The three "less" options ship prepped so your locksmith can drop in cores from an existing key system; P is the ready-to-go conventional cylinder; T is what you want on a jobsite where the contractor needs temporary keying before the permanent cores go in.
5) What is the closest cross-brand equivalent to the Schlage PM050 mortise lock in an office/entrance function?
The Cal-Royal NM8050 is the nearest match from another brand. It is a heavy duty Grade 1 office/entrance mortise lockset with an auxiliary deadlatch, and it is built for 1-3/4 inch doors, the same standard door thickness the PM050 carries. Both are Grade 1 mortise locksets, so a spec calling for Grade 1 mortise at an office opening is satisfied by either. The PM050 differs in trim breadth, offering A, C and D roses plus an N escutcheon and six finishes from 613 Oil Rubbed Bronze through 643E Aged Bronze.
6) I need a mortise lock for a corridor or closet door that never needs to lock. Is the PM050 right, or is there a better option?
For an opening that never locks, a dedicated passage mortise lock is the cleaner choice. The Falcon MA101 is a Grade 1 heavy duty mortise passage lock with field reversible operation and a fire rating, and the TownSteel MRX-L-01 is a Grade 1 heavy duty passage mortise lockset in stainless with anti-ligature lever trim. Hager also offers the 3810S in a Grade 1 passage mortise with rose trim and a 2-3/4 inch backset, matching the PM050 backset. The PM050 itself is field reversible as well, so handing is not the deciding factor between them.
7) Which mortise lock should I order instead of the PM050 for a storeroom opening?
Storeroom keeps the outside lever locked at all times with key access only, which is a different function from the PM050. The Accentra 8805FL is a Grade 1 storeroom mortise lock in the 8800 Series with an Arcadia lever, and the Cal-Royal NM8080 is a Grade 1 heavy duty storeroom mortise lockset with an interchangeable core option for 1-3/4 inch doors. If you are standardizing on interchangeable cores, note the PM050 is offered in B less SFIC, J less FSIC and T FSIC construction core builds as well.
8) I need privacy on a restroom or bedroom door. Can the PM050 do that?
No. The PM050 is an office/entrance function with a key cylinder outside and a thumbturn inside that locks the outside lever, not a dedicated privacy lock. For privacy, the Cal-Royal NM8440 is a Grade 1 heavy duty privacy mortise lockset with deadbolt for 1-3/4 inch doors, and the Hager 3840S is a Grade 1 privacy mortise lock with a 2-3/4 inch backset for doors 1-3/4 to 2 inches. The 3840S shares the PM050 2-3/4 inch backset, so the door prep carries over.
9) Is the Hager 3850E a direct substitute for the Schlage PM050?
They are close but not identical. The Hager 3850E is a Grade 1 office mortise lock with lever and escutcheon trim on a 2-3/4 inch backset for doors 1-3/4 to 2-1/2 inches, and it is non-keyed. The PM050 in its keyed builds carries a key cylinder outside, offered as a P conventional 6-pin cylinder keyed 5 or prepped less cylinder in B, J and L. If your opening needs key control from the corridor side, the cylinder difference is the deciding point; if it does not, the 3850E covers the same office function on the same backset.
10) I want keypad or credential access at this opening instead of a key. What replaces the PM050?
Move to an electronic mortise lock, since the PM050 is a mechanical lock. Options include the Schlage CO-100 standalone electronic mortise lock with keypad reader, Grade 1 heavy duty for 1-3/4 inch doors; the Schlage Electronics LEMD-GRW Grade 1 ENGAGE wireless mortise lock with a 125 kHz proximity reader and a 3 hour fire rating; and the TownSteel FME-2000, a Grade 1 heavy duty classroom mortise lockset with RFID for 1-3/4 inch doors. The Alarm Lock DL3500CR is a Grade 1 electronic mortise lock with 300 user codes and classroom function for doors 1-5/8 to 1-7/8 inches.
11) Can I use a Baldwin 6301 mortise lock body in place of the PM050?
Only if the door is prepped for it. The Baldwin 6301 is an entry/apartment mortise lock body on a 2-1/2 inch backset, offered knob by knob or, as the 6301LS, lever by lever, for doors 1-3/4 inch and over. The PM050 is 2-3/4 inch backset only, so the cylinder and spindle centers do not land in the same place and the existing mortise pocket will not accept both. Verify the backset on the door before swapping between the two.
12) For a behavioral health or ligature-resistant opening, what do I specify instead of the PM050?
Specify a purpose-built anti-ligature set. The TownSteel MRX-L-01 is a Grade 1 heavy duty stainless steel anti-ligature lever mortise lockset in passage function for 1-3/4 inch doors, and the MRX-A-01 is the same passage function with satin stainless ligature resistant arch trim. The Marks USA 5PDN is a Grade 1 hospital passage mortise push/pull paddleset that is ligature resistant and ADA compliant in satin stainless steel. The PM050 uses a Selena lever, which is a conventional lever profile.
13) Can I match the Schlage PM050 to the other locks in my building?
Yes, and that is the point of the PM Series. It is built to suite with other Allegion hardware, and it shares lever and rose styles with the Schlage PT Series tubular locks, so a Selena lever on a mortise-prepped corridor door matches a Selena lever on a bored office door down the hall. The series also carries Schlage's full key system lineup, so the cylinders can be brought onto an existing masterkey system.
14) Is the Schlage PM050 heavy duty enough for a commercial corridor?
It is a Grade 1 mortise lock built for commercial use, aimed at commercial real estate, retail, multifamily and hospitality. The case is cold rolled steel with corrosion resistant zinc dichromate plating, latch and deadbolt are stainless, and the deadbolt throws 1 inch (25 mm). Grade 1 is the highest ANSI/BHMA durability tier, which is what most institutional and MRO specs call for on a main traffic opening.
15) What are the alternatives to a Schlage PM050 mortise lock from other brands?
A few real options depending on what you need. The Cal-Royal NM8050 is a Grade 1 heavy duty office/entrance mortise lockset for 1-3/4 inch doors with an auxiliary deadlatch. Hager's 3800 Series covers the same territory with the 3850E office function on a 2-3/4 inch backset, and the 3810S or 3810E for straight passage, both rated for 1-3/4 to 2-1/2 inch doors. Within Allegion, the Falcon MA101 is a Grade 1 heavy duty mortise passage lock, also field reversible. If the opening needs credential access instead of a key, the Schlage CO-100 mortise lock is a Grade 1 standalone keypad unit for 1-3/4 inch doors.
16) How far apart are the cylinder and thumbturn holes on a Schlage PM050 prep?
Spacing runs 3-7/8 inches (98 mm) from lever to cylinder and 2-11/16 inches (68 mm) from lever to thumbturn hub. Those are the numbers to check against an existing door prep before you order, since PM and L Series case and cover holes are not the same.
17) What is the difference between the PM050 and the BEST 45H public entrance lock body?
The BEST 45HCAC is sold as a heavy duty mortise lock body in the 45H Series with public entrance function and field reversible operation, so it is the case alone and trim is specified separately. The PM050 is supplied as a complete mortise lockset with Selena lever trim and a choice of A, C or D rose or N escutcheon, and it is likewise field reversible. Choose the 45H body if you are rebuilding existing BEST-trimmed doors and keeping the trim on them.
18) Would a Sargent 4874 deadbolt work instead of the PM050?
It serves a different purpose. The Sargent 4874 is a double cylinder mortise deadbolt on a 2-3/4 inch backset in the 4870 Series, so it provides a bolt only with no lever and no latch operation. The PM050 retracts its latchbolt by lever from either side and is supplied with a 10-072 1-1/4 inch by 4-7/8 inch square corner strike and box. Use the 4874 as added bolt security alongside a latching lockset, not as a replacement for one.
19) Is a Sargent 130KB thumbturn a substitute for the PM050 if I only need the thumbturn side replaced?
No, they are not the same category of item. The Sargent 130KB is a standard duty mortise thumbturn in the 8200 Series, and the 130W is a mortise thumbturn with a round backplate in the 7800 Series - both are trim pieces, not lock cases. The PM050 is a complete mortise lockset whose thumbturn style is ADA qualified and which mounts a case measuring 4-7/16 by 6-1/16 by 1 inch. Sargent thumbturns are matched to Sargent lock bodies, so they are not a trim swap onto a PM case.
20) What mortise option should I look at for a dormitory or apartment corridor door?
The Sargent 7925 is a Grade 1 heavy duty dormitory exit function mortise lock in the 7900 Series with rose trim and a single cylinder deadbolt, which adds a bolt the PM050 office function does not throw. The Baldwin 6310 entry/storeroom mortise lock body on a 2-1/2 inch backset is another route for doors 1-3/8 inch and over, with the 6310190RRLS supplied right hand reverse lever by lever. Match the backset to the door: the PM050 is 2-3/4 inch.
21) Emtek mortise entrance locksets look similar. Are they alternatives to the PM050?
They serve a different role. The Emtek 3019 Brisbane, 3102 Memphis, 3104 Hamilton and 3106 Manhattan mortise entrance locksets are all dummy function, meaning fixed trim with no latch operation, typically for an inactive leaf. The PM050 retracts a latchbolt by lever from either side and is a commercial Grade 1 mortise lock. Use an Emtek dummy set only on a leaf that does not need to operate.
22) My doors are thicker than 1-3/4 inch. Which mortise lock covers that range?
The Hager 3800 Series covers doors from 1-3/4 to 2-1/2 inches in the 3810E passage with escutcheon and the 3810S passage with rose, both on a 2-3/4 inch backset, and the 3850E office function shares the same 1-3/4 to 2-1/2 inch range. The PM050 lists 1-3/4 inch as its standard door thickness and uses the same 2-3/4 inch backset, so prep centers align across these options.
23) Is the thumbturn on the Schlage PM050 ADA qualified?
The PM Series thumbturn style is ADA qualified, and the trim is a lever rather than a knob, which is what accessibility requirements generally call for on a commercial opening.
How fast can I get the Schlage PM050P SELA 626 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Schlage PM050P SELA 626 come with a warranty?
Absolutely. The Schlage PM050P SELA 626 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Schlage PM050P SELA 626?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Schlage PM050P SELA 626 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!