Securitron DEM680E Delayed Egr...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1,486.00
$1,013.95
Securitron Securitron DEM680E Delayed Egress Magnalock SEC-DEM680E

Securitron DEM680E Delayed Egress Magnalock

(No reviews yet) Write a Review

Model: DEM680E-628
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1,486.00
$1,013.95
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Securitron DEM680E Delayed Egress Magnalock

Building on the technology of the Securitron EcoMag Series, the DEM680E is a direct replacement for the iMXDA. Designed for applications that require a lock that delays the opening of a door, the DEM680E standard model is HUGS-compliant with specific code compliant models also available. For use on interior and perimeter exit, single, out-swinging doors..

FEATURES & BENEFITS

Product Features

  • Size optimized to work with door closers
  • Configurable settings include: Nuisance delay times, Irrevocable alarm times, Bypass delay times, No irrevocable alarm after bypass expiration
  • Patented BondSTAT magnetic bond sensor and integrated Door Position Switch (DPS)
  • Autosensing dual voltage with microprocessor technology – no field adjustment required
  • Fully integrated delay and detection features for fast installation of delayed egress system
  • Auto calibrated door movement detection up to 1/4" [6.35mm]
  • External alarm relay isolated dry contact (1 A at 24 VDC)
  • Easily visible LEDs indicate status on secure side of door
  • Alarm strobe indicates countdown; stays illuminated post alarm until reset
  • Instant release circuit – no residual magnetism

 

SPECIFICATIONS

Electrical

  • Minimum Current: 95mA ( ± 10% ) at 12 VDC | 65mA ( ± 10% ) at 24 VDC
  • Maximum Current: 575mA ( ± 10% ) at 12 VDC | 315mA ( ± 10% ) at 24 VDC

Holding Force

  • 1,200 lbs [544kg] static strength

Operating Temperature

  • 32������������������������������������������������������������������������������������������������������������ to 120������������������������������������������������������������������������������������������������������������F [0������������������������������������������������������������������������������������������������������������ to 49������������������������������������������������������������������������������������������������������������C]
  • Indoor use only

Shipping Weight

  • 13.1 lbs [5.9 kg]

 

CERTIFICATIONS

  • UL 294 Listed
  • UL 10C Fire Rated 1 hour
  • CSFM - California State Fire Marshal approved (DEM680E-CA only)
  • CAN/ULCS104 Fire Door Conformant
  • NFPA 101

DOWNLOAD & RESOURCES

Manufacturer Resources

Product Specs

Series:
DEM680E Series
Subcategory:
Delayed Egress
Holding Force:
1200
Warranty:
Lifetime Replacement
Grade:
Grade 2
Product Group:
Electronic Access Controls
Product Subgroup:
Electromagnetic Locks
Product Type:
Delayed Egress
Commercial/Residential:
Commercial
Electronic:
Yes
Product Model:
SEC-DEM680E
Product Voltage:
12/24VDC
Product Category:
Electronic Access Controls
Department:
Door Hardware

Securitron DEM680E-628 – Frequently Asked Questions

1) Will a Securitron DEM680E delayed egress maglock work on a pair of doors or an in-swinging door?
No. The DEM680E is built for single, out-swinging doors on interior and perimeter exits. In-swing openings and pairs need a different approach, since the mag and armature geometry here assumes a single out-swinging leaf. Size was optimized so the housing clears a door closer on that same header.
2) Which DEM680E version do I order for a California job, and what is the difference from the standard model?
Timing is an ordering choice on the DEM680E, and it is code-driven. The standard model runs the HUGS-supporting delay. For California work there are 15 second and 30 second compliant versions, and the CSFM (California State Fire Marshal) approval applies to the DEM680E-CA only. Chicago has its own compliant version. Pick the timing to match the authority having jurisdiction over the building, because the delay period is what the inspector checks.
3) Can I put a delayed egress Magnalock on a 1 hour fire rated door?
The DEM680E carries UL 10C fire rating at 1 hour and is CAN/ULC S104 fire door conformant, so it is suited to a rated opening. It is also UL 294 Listed for access control equipment and built to NFPA 101 life safety requirements, which is what governs delayed egress in the first place.
4) I'm replacing a Securitron iMXDA. Is the DEM680E a direct swap?
Yes, the DEM680E is a direct replacement for the iMXDA. It builds on the Securitron EcoMag platform, so the delay logic, bond sensing and door position switch are all in the one housing rather than spread across separate boxes.
5) Do I need to set the DEM680E for 12 volts or 24 volts when I wire it?
Neither, and that is the point. The DEM680E is autosensing dual voltage at 12/24VDC with microprocessor control, so there is no field adjustment or jumper to set. Size your supply from the draw: 95mA minimum and 575mA maximum at 12 VDC, or 65mA minimum and 315mA maximum at 24 VDC, all plus or minus 10 percent.
6) Do I have to add a separate delayed egress control panel and door contact to the DEM680E?
No. Delay timing and detection are integrated into the lock itself, along with the patented BondSTAT magnetic bond sensor and an integrated Door Position Switch, so a separate DPS and controller are not part of the package. If you would rather run delayed egress from a wall panel driving existing hardware, the Dortronics 7101 Series EDR-101 delayed egress control panel with keypad console is the panel-based route.
7) How much holding force does the DEM680E have, and is that enough for an exterior perimeter exit door?
1,200 lbs [544kg] static holding force, which is the mid-range figure for a delayed egress opening where the delay circuit, not raw force, does most of the work. Rated Grade 2. Note the temperature and siting limit: 32 to 120 degrees F [0 to 49 C], indoor use only, so a perimeter exit door is fine as long as the lock itself sits on the conditioned side.
8) Can I tie the DEM680E alarm into my access control panel or a remote annunciator?
There's an external alarm relay on board, an isolated dry contact rated 1 A at 24 VDC, which is what you land on a panel input or an annunciator. On the door itself, LEDs on the secure side show status and an alarm strobe indicates the countdown, then stays lit after the alarm until someone resets it, so staff can see which opening tripped without going to the head end.
9) Can the delay times on the DEM680E be adjusted after installation?
Configurable settings on the DEM680E cover nuisance delay times, irrevocable alarm times, bypass delay times, and whether an irrevocable alarm follows bypass expiration. That last one matters for facilities that authorize staff exits regularly and do not want a latching alarm every time a bypass runs out. Door movement detection is auto calibrated up to 1/4 inch [6.35mm], so ordinary push-and-rattle on the door will not start a countdown.
10) Is the DEM680E suitable for a hospital infant protection system?
The standard timing model is HUGS-compliant, which is the infant security system used in maternity and pediatric units, and specific code compliant models are offered separately. For a healthcare facility standardizing across units, that is the version to specify.
11) Will the DEM680E release instantly when the fire alarm drops power?
Release is instant, with no residual magnetism holding the armature after power is cut. That is the behavior a fire alarm interface and a life safety inspection both depend on, since a mag that stays tacked to the plate for a moment after release reads as a failure on the door.
12) What finishes does the Securitron DEM680E come in, and can I match the other hardware on the opening?
Nine finishes across all timing versions: 600 primed for painting, 605 bright brass, 606 satin brass, 612 satin bronze, 613E dark oxidized satin bronze, 628 satin aluminum clear, 629 bright stainless, 630 satin stainless, and BSP black suede powder. Every finish is offered with each timing option, so a California 15 second unit can still match 630 hardware elsewhere in the building. The 600 primed option is there when you need the housing painted to the frame color.
How fast can I get the Securitron DEM680E-628 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Securitron DEM680E-628 come with a warranty?
Absolutely. The Securitron DEM680E-628 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Securitron DEM680E-628?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Securitron DEM680E-628 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!