You may also like
Securitron WEMB Weather Resistant Electromechanical Bar
Model: SEC-WEMB
SECURITRON WEMB WATER RESISTANT ELECTROMECHANICAL EXIT BAR The Electromechanical Exit Bar (EMB) is designed for use on magnetically locked, non-fire-rated doors - or as an initiate device for a...
Securitron
Starting at
$369.00
$259.93
SECURITRON GL1 ELECTROMECHANICAL GATE LOCK
Electromechanical Gate Solution Offers One Ton of Holding Power
The heavy duty GL1 Electromechanical Gate Lock provides weather-resistant access control for a wide range of gate applications. The GL1 provides 2,000 lbs of holding force for electrical and manually operated indoor or outdoor gates where preload is a concern. Ideal for swinging or sliding vehicle, pedestrian or stock gate access control.
The heavy duty GL1 Electromechanical Gate Lock provides weather-resistant access control for a wide range of gate applications. The GL1 provides 2000lbs of holding force for electrical and manually operated indoor or outdoor gates where preload is a concern.
FEATURES & BENEFITS
Product Features
- 2,000 lbs holding force
- Operates under preload up to 100lbs
- Automatic dual voltage - no field adjustment required
- Accepts a standard mortise cylinder with Adams Rite MS cam for manual key override (not included, see spacer guide below)
- Self-aligning receiver helps compensate for gate misalignment and sag
- Tamper resistant cast housing
- Optional latch status monitor
- Surface mount
- MagnaCare® lifetime replacement, no fault warranty
SPECIFICATIONS
Specification Data
- Holding Force: 4000 lbs. [1814 kg]
- Current Draw and Voltage:
- AC Current: 130 mA max at 12 VAC, 250 mA max at 24 VAC
- DC Current: 100 mA max at 12 VDC, 200 mA max at 24 VDC
- Operating Temperature: -40 to +140F [-40 to +60C]
- Shipping Weight: 6 lbs
- UL Listed
Mortise Spacer Guide
| CYLINDER LENGTH | SPACER REQUIRED |
| 1" [25.4mm] | 1/4" [6.35mm] |
| 1-1/8" [28.5mm] | 3/8" [9.5mm] |
| 1-1/4" [31.75mm] | 1/2" [12.7mm] |
Models
| Part # | Description |
| GL1-FL | Gate Lock, 12/24VDC, Standard Fail Locked |
| GL1-FS | Gate Lock, 12/24VDC, Standard Fail Safe |
| GL1-FLM | Gate Lock, 12/24VDC, Fail Locked Monitored |
| GL1-FSM | Gate Lock, 12/24VDC, Fail Safe Monitored |
| GMC | Gate Lock Mortise Cylinder (for use with FL Models only) |
CERTIFICATIONS & LISTINGS
DOWNLOADS & RESOURCES
Manufacturer Resources
Product Specs
- Series:
- GL1 Gate Lock Series
- Holding Force:
- 2000
- Warranty:
- Lifetime Replacement
- Product Group:
- Electronic Access Controls
- Product Subgroup:
- Electromagnetic Door Holders
- Product Type:
- Electromechanical Gate Locks
- Commercial/Residential:
- Commercial
- Electronic:
- Yes
- Subcategory:
- Electromagnetic Door Holders
- Duty Level:
- Heavy Duty
- Product Model:
- SEC-GL1
- Product Voltage:
- 12/24VDC
- Product Height:
- 7-1/4"
- Product Category:
- Electromagnetic Locks
- Product Width:
- 3-3/16"
Securitron GL1-FL – Frequently Asked Questions
1) What is the Securitron GL1 electromechanical gate lock designed for?
The GL1 is designed for securing pedestrian gates and light vehicular gates. It provides fail-safe operation with electric release capability. Best suited for gates up to 200 pounds when properly installed.
2) Is the GL1 compatible with different gate frame materials?
Yes, the GL1 works with steel, aluminum, and wood gate frames. Mounting hardware varies by material type. Verify frame thickness and material before ordering to ensure proper installation.
3) Does the GL1 require specific gate swing direction or handing?
The GL1 is field-reversible for left or right-hand gates. It works with both push and pull gate configurations. Adjustment is made during installation without requiring different models.
4) What finish options are available for the GL1?
Standard finish is satin stainless steel for corrosion resistance. This finish works well in most outdoor applications and provides professional appearance. Check with manufacturer for special finish requirements.
5) What power requirements does the GL1 need?
The GL1 operates on 12VDC or 24VDC depending on model selection. Current draw is minimal during standby. Verify voltage requirements match your access control system before installation.
6) Does the GL1 meet building code requirements for egress?
The GL1 provides fail-safe operation for emergency egress compliance. Always verify local building codes and ADA requirements. Consult authority having jurisdiction for specific applications.
7) What accessories are needed for GL1 installation?
Basic installation requires mounting hardware included with unit. Additional accessories may include gate position switches, request-to-exit devices, or weather seals. Check Securitron products for compatible accessories.
8) Can the GL1 be installed on existing gates?
Yes, the GL1 can retrofit most existing gates with adequate frame strength. Gate must be properly aligned and in good operating condition. Use manufacturer template for precise cutout dimensions.
9) How is the GL1 lock adjusted after installation?
The GL1 includes adjustment screws for fine-tuning latch alignment. Strike plate position can be adjusted for proper engagement. Make adjustments gradually and test operation after each change.
10) Are there similar Securitron models for different applications?
Securitron offers the GL2 for heavier gates and the M32 magnetic lock series for different mounting needs. Browse access control products to compare models and specifications.
11) What gate clearances are needed for proper GL1 operation?
Minimum clearances depend on gate thickness and frame design. Verify measurements against manufacturer specifications. Allow adequate space for latch travel and potential gate movement.
How fast can I get the Securitron GL1-FL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Securitron GL1-FL come with a warranty?
Absolutely. The Securitron GL1-FL is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Securitron GL1-FL?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Securitron GL1-FL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.