You may also like
Select Hinges SL21 - Swing Clear Full Surface Heavy Duty Continuous Geared Hinge
Model: SL21-HD
Select Hinges
Select Hinges SL21 - Swing Clear Full Surface Standard Duty Continuous Geared Hinge
Model: SL21-SD
Select Hinges
Select Hinges SL57 - Full Surface Heavy Duty Continuous Geared Hinge
Model: SL57-HD
Select Hinges
Select Hinges SL24 - Full Mortise Heavy Duty Continuous Geared Hinge
Model: SL24-HD
Select Hinges
Select Hinges SL11 - Heavy Duty Flush Mounted Concealed Continuous Geared Hinge
Model: SL11-HD
Select Hinges
Select Hinges SL41 - Swing Clear Grade 1 Heavy Duty Continuous Geared Hinge
- Swing-clear action
- Door edge protector
- Requires 2-1/4" frame face
- for full rotation clearance
- 1/16" door inset
- For 1-3/4" doors
- Grade 1
MATERIAL: Extruded 6063 T6 aluminum alloy with selflubricating polyester thrust bearings. LENGTHS: 83", 85", 95" and 120" lengths standard for nominal door heights. Custom lengths are available.
LOAD/FREQUENCY RATINGS: For 1-3/4" doors. 48" max. door width in 16 gauge hollow metal (min.) or 1/8" aluminum (min.).
Heavy Duty — Tested per BHMA standards. Up to 200 lb. doors (high-frequency) and up to 400 lb. doors (medium-frequency) without frame or door reinforcement; up to 600 lb. doors (low-frequency) with the use of Rivnuts in the frame and door.
Heavy Duty (LL) — Our HD hinge with additional fastener holes for low-frequency doors up to 1,000 lb., including most lead-lined doors. Rivnuts are recommended in the frame and door on extremely tall, extremely heavy or wide doors.
FINISHES: All SL41 hinges are stocked in Clear and Dark Bronze anodized aluminum. Custom anodized or painted finishes are available. Product painted or anodized in the field voids the SELECT hinge warranty.
CLOSERS: Conventional overhead surface, concealed sliding arm overhead or floor closers may be used with SELECT hinges. Pivot-type floor closers (with a fixed, conflicting center pivot) must be replaced.
Manufacturer Resources
Product Specs
- Product Group:
- Door Hinges and Pivots
- Product Subgroup:
- Continuous Hinges
- Application:
- Geared Continuous Hinges are Build to Handle Abuse From High Traffic Applications
- Fire Rating:
- Fire Rated for 90 Minutes, 3-Hr Fire Rating is Optional At Extra Cost
- Bearing Type:
- Continuous Gear
- ADA Compliant:
- No
- Standards:
- ANSI A250.4 1994
- Series:
- SL41 Series
- For Use With:
- 1-3/4" Doors
- Duty Level:
- Heavy Duty
- Fasteners:
- Fire Rated for 90 Minutes
- Fire Rated:
- Yes
- Hinge Clearance:
- 2-1/4" Clearance required for cap rotation