Trimco 1195 Straight Grip Pulls, 1" or 1-1/4" Round (8", 10", 12", and 18" CTC options)

Four center-to-center dimensions are offered on the 1195: 8 inch (model 1195-1, 1 inch diameter), 10 inch (1195-2, 1 inch dia.), 12 inch (1195-3 and 1195-6 in 1 inch dia., 1195-3J in 1-1/4 inch dia.), and 18 inch (1195-6J, 1-1/4 inch dia.). Measure your existing hole spacing center to center before you pick, since that spacing is what has to match the door prep.

The Ives 8103HD is a heavy duty straight door pull in 1 inch round bar with through bolt mounting, which puts it in the same form as the Trimco 1195 in its 1 inch diameter models such as the 1195-1 at 8 inch center to center and the 1195-3 at 12 inch center to center. The ABH AB3300 is also a straight pull in 1.00 inch diameter, with flat ends rather than the Trimco profile. Both are straight, single-run grips like the 1195 rather than offset handles, so either drops into an opening laid out for a straight pull as long as the center to center spacing and hole prep match.

The Trimco 1195 is a straight grip, so an opening that requires the handle to stand off the door on an angled or returned leg needs a different form. The ABH AB3310 is an offset flat end door pull for surface mount, the ABH AB3330 is an offset round end pull with custom length options, the Ives 8169 is a C style offset solid pull in 1 inch diameter with heavy duty mounting, and the Ives 8145EZHD is a 45 degree offset pull with heavy duty mounting hardware and is ADA compliant. The Ives 8169 in 1 inch diameter carries the same bar size as the 1 inch round Trimco 1195 models if you want the grip to feel the same in the hand while changing the mounting geometry.

No. The Cal-Royal PUL-175 is a night latch cylinder pull, 3-1/2 inch height, in stainless steel construction. It is a small trim piece that surrounds a rim cylinder on a door with a night latch, and it is sized and prepped for that cylinder, not for a two point grip. The Trimco 1195 is a straight grip pull with center to center spacing from 8 inch through 18 inch across models such as the 1195-2 at 10 inch center to center. If the door has a rim cylinder and needs a pull around it, the Cal-Royal is the correct family; if it needs a grip to open a door, it is not an alternative to the 1195.

The Trimco 1195 straight grip family covers 6 inch to 18 inch center to center, topping out with the 1195-6J at 18 inch center to center in 1-1/4 inch diameter. For a longer run, the Deltana SSPOBB24 and SSPORBB24 are 24 inch back-to-back offset pulls, in modern offset and round offset profiles respectively, and the ABH AB3330 offset round end pull is available with custom length options. All three are offset rather than straight, so the door face prep and the standoff change along with the length.

The Trimco 1195 straight grip is ADA compliant. Among the peers, the Ives 8145EZHD 45 degree offset pull is ADA compliant with heavy duty mounting hardware. If the opening is on an accessible route and the specification calls for a straight grip, the Trimco 1195 answers it directly; if the drawing calls for an offset, the Ives 8145EZHD is the offset form carrying the same claim.

3-1/2 inches of projection off the door face. That is the number to check if the pull sits near a return wall, a frame, or a second leaf of a pair, and it's also what decides whether a hand in a work glove clears the door when someone yanks it open.

It's a heavy duty commercial pull, made from stainless steel, bronze or brass, and Trimco lists it for schools, commercial and industrial buildings, government and military facilities, retail, hospitality and multifamily. Solid round bar stock in those materials is what holds up on an opening that gets pulled thousands of times a week, which is where a light residential pull fails first.

710CU is Trimco's Healthy Hardware Steralloy Silver finish, a copper-alloy finish offered on the 1195 straight grip alongside the standard architectural finishes. It's the option people specify on high-touch openings in healthcare, schools and food service where the pull is a shared contact surface. The 1195 is flagged as a Healthy Hardware product for that reason.

Eleven finishes are offered on the 1195: 605 bright brass, 606 satin brass, 613 oil rubbed bronze, 613E dark oxidized satin bronze, 622 matte black, 625 bright chrome, 626 satin chrome, 628 satin aluminum, 629 bright stainless, 630 satin stainless, and 710CU Steralloy Silver. Pick by the BHMA number stamped on or specified for your existing trim, not by the name, since 626 and 630 look similar at a glance but are different base metals.

A straight grip like the Trimco 1195 mounts parallel to the door face on two posts and is the plainest, most common choice for entrances, restroom doors and corridor doors. An offset pull angles the grip away from the face, which buys extra knuckle room and is what people reach for when the pull sits close to a frame or when hand clearance is tight. If you want the offset, ZenSupply carries the Ives 8145 45 degree offset pull, the Ives 8169 C style offset in 1 inch diameter, and the ABH AB3310 offset flat end and AB3330 offset round end series.

Back-to-back mounting is one of the options Trimco offers on the Straight Grip line, which is how these get used on glass front and full-view doors where you want a matching pull on both faces. If you need a ready-made back-to-back set instead, ZenSupply stocks the Deltana SSPOBB24 24 inch back-to-back modern offset pulls and the SSPORBB24 24 inch back-to-back round offset pulls.

Both are 12 inch center-to-center straight grips. The difference is bar thickness: the 1195-3 is 1 inch diameter round, the 1195-3J is 1-1/4 inch. Same hole spacing, so either drops onto the same prep, but the J gives a fuller grip and a heavier look. The 18 inch CTC model, the 1195-6J, is 1-1/4 inch diameter as well.

The Ives 8102HD is a heavy duty straight door pull built on 3/4 inch round bar with 1-1/2 inch clearance, and the ABH AB7200 is a solid stainless steel flat end pull in 7/8 inch diameter with through bolt mounting. Both are thinner stock than the Trimco 1195, which runs 1 inch and 1-1/4 inch diameter round in models like the 1195-3J at 12 inch center to center and the 1195-6J at 18 inch center to center. Grip diameter changes the hand feel and the projection of the handle off the face of the door, so confirm which diameter the door schedule calls out before ordering.

The Deltana SSP1210 is a 12 inch contemporary pull for single side mounting, which puts it at the same nominal length band as the Trimco 1195-3 and 1195-6 models at 12 inch center to center. The difference to check is how the length is stated: the Trimco models are called out by center to center dimension, so match the hole spacing in the door rather than the overall bar length when you cross between the two.

The Trimco 1195 straight grip is heavy duty and commercial, and comes in an antimicrobial 710CU Healthy Hardware Steralloy Silver finish alongside standard finishes such as 630 Satin Stainless Steel and 626 Satin Chrome. On the peer side, the Ives 8103HD and Ives 8102HD are both heavy duty straight pulls, the 8103HD in 1 inch round with through bolt mounting and the 8102HD in 3/4 inch round bar. Through bolt mounting is what carries repeated pulling load into the door rather than into the face sheet, so it is worth confirming on whichever you pick for a corridor that sees constant use.

The Trimco 1195 straight grip offers the 710CU Healthy Hardware Steralloy Silver finish, and the grip is heavy duty and commercial rated in stainless steel, bronze or brass substrate. Straight pull peers such as the Ives 8103HD in 1 inch round and the ABH AB7200 in 7/8 inch solid stainless steel are the comparable forms if the finish requirement is a standard stainless rather than an antimicrobial alloy. On a touch-surface program where the copper alloy finish is the driver, the 1195 in 710CU is the one that matches it.

No, it's a commercial pull. Heavy duty solid stock in stainless, bronze or brass, specified for schools, government buildings, retail and multifamily corridors. For a residential entry or interior door where the look drives the choice, the Emtek 8 inch pulls, Art Nouveau in lost wax cast bronze, Arts and Crafts, Baden and Brisbane, are the decorative route. The Deltana SSP1210 is a 12 inch contemporary single-side pull.