4 inch Low Voltage Die-Cast Adjustable Specular Round Trim
HR-D412LED - LED MR16 ( Included )
Features
- Input: 12 VAC
- Construction: Die-cast aluminum
- Accommodates most LED MR16 lamps
- Center lamp holder allows lamp to be tilted up to 35° from vertical
- The supplied clear glass lens can be replaced with one lens accessory
- Steel spring clips secure trim to housing
Manufacturer Resources:
Manufacturer Resources
Product Specs
- Product Group:
- Indoor Lighting
- Brand Family:
- WAC Limited
- Subcategory:
- Ceiling Lighting
- Segment:
- Lighting
WAC Lighting HR-D412LED-SC/BN – Frequently Asked Questions
1) Does the WAC Lighting HR-D412LED 4 inch trim come with a lamp, or do I need to order an MR16 separately?
The lamp is included. The HR-D412LED ships as a 4 inch low voltage round trim with an LED MR16, and the center lamp holder also accommodates most other LED MR16 lamps if you swap it later.
2) Can I aim the WAC HR-D412LED trim at artwork or a wall?
Yes. The center lamp holder tilts the lamp up to 35 degrees from vertical, so it works for accent aiming off a sloped or flat ceiling. Aim is set at the lamp holder, not by rotating the whole trim ring.
3) How does this 4 inch trim attach to the recessed housing?
Steel spring clips hold it in place. You squeeze the clips, push the trim up into the housing, and they tension against the inside of the can, so no screws or tools are needed for a swap-out.
4) What finishes does the WAC HR-D412LED 4 inch adjustable trim come in?
Two: specular clear reflector with a brushed nickel ring (HR-D412LED-SC/BN) and specular clear with a white ring (HR-D412LED-SC/WT). The specular clear cone is the same in both, so the visible difference is the trim flange against the ceiling.
5) Can I change the lens on the WAC HR-D412LED to soften or color the light?
Yes. It ships with a clear glass lens, and that lens can be swapped for one lens accessory, so you can run a diffusing or color lens in place of the clear one. Only one lens is used at a time.
6) Is the HR-D412LED trim metal or plastic? I need something that holds up in a rental turnover.
Die-cast aluminum construction, with steel spring clips. That matters for property managers and MRO buyers pulling and reinstalling trims between tenants, since a die-cast ring takes the handling better than a stamped or molded one and the specular reflector is part of the assembly.
How fast can I get the WAC Lighting HR-D412LED-SC/BN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the WAC Lighting HR-D412LED-SC/BN come with a warranty?
Absolutely. The WAC Lighting HR-D412LED-SC/BN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the WAC Lighting HR-D412LED-SC/BN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the WAC Lighting HR-D412LED-SC/BN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.