WAC Lighting 25-IL LED Surface...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$136.95
WAC Lighting 25-IL LED Surface Mounted Indicator Light, Stainless Steel

WAC Lighting 25-IL LED Surface Mounted Indicator Light, Stainless Steel

(No reviews yet) Write a Review

Model: 2531-27BS
From the Surface Mounted Indicator Light Collection
$136.95

In Stock (leaves warehouse same day if ordered before 3pm ET)

$136.95
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

WAC Lighting 25-IL LED Surface Mounted Indicator Light

The WAC Lighting 25-IL LED Surface Mounted Indicator Light is a low-voltage landscape fixture built for wells and ponds, pools, decks and patios, and ceiling or wall installations indoors and out. Cast from 316 marine grade stainless steel with an IP68 rating for protection against submersion up to 5 meters, it is factory sealed and water tight for harsh outdoor and coastal conditions. Operating on a 9-15V AC input at 2.8W (5VA), it delivers up to 80 lumens with a CRI of 85 and a 60,000 hour rated life, and requires a Magnetic or Electronic 12V power supply.

Key Features

  • Durable Construction: Casted with 316 marine grade stainless steel in a polished stainless steel or bronze coated finish for enhanced corrosion protection, recommended for coastal and marine grade environments.
  • Water-Tight Sealing: Factory sealed and water tight with an IP68 rating, protecting against submersion up to 5 meters under water as well as outdoor elements.
  • Easy Installation: Surface mounted design includes 3ft of low voltage burial cable, direct burial gel filled wire nuts, and an optional spring retention clip.
  • Electrical Rating: High-powered LED with 9-15V AC input and 2.8W (5VA) power draw for efficient low-voltage landscape circuits.
  • Light Output: Delivers up to 80Lm brightness with a CRI of 85 and a 60,000 hour average rated life.
  • Dimmable Performance: Smooth and continuous dimming down to 10% when paired with a Magnetic Low Voltage (MLV) dimmer.
  • Power Supply Compatibility: Requires a Magnetic or Electronic 12V power supply; WAC Stainless Steel outdoor transformers are recommended, including the 75W 9075-TRN-SS, 150W 9150-TRN-SS, 300W 9300-TRN-SS, and 600W 9600-TRN-SS.

Certifications & Compliance

  • UL & cUL 1838 Listed
  • IP68 Rated for Wet Locations

Technical Specifications

  • Bulb Base: LED Module - Transformer
  • Bulb Shape: LED
  • Bulbs Included: Yes
  • Dimmable: MLV
  • Energy Star: No
  • Hardwired or Portable: Hardwired
  • Number of Bulbs: 1
  • Product Type: Path Lighting
  • Safety Rating: UL;cUL;IP68
  • Shade/Glass Description: Clear Glass Lens
  • Warranty: 10 Years Functional, Lifetime Warranty on Finish
  • Subcategory: Path Indicator Light
  • Avg Rated Hours: 60000
  • Beam Spread: Flood
  • Voltage: 12
  • Country of Origin: China
  • Location Rating: Wet
  • Total Wattage: 2.8
  • Style: Modern

Typical Applications

  • Wells and Ponds
  • Pools, Decks, and Patios
  • Ceiling and Wall Installations
  • Coastal and Marine-Grade Environments
  • Indoor and Outdoor Landscape Lighting

Why WAC Lighting?

WAC Lighting builds the 25-IL from 316 marine grade stainless steel with a factory sealed, IP68 water-tight housing engineered for demanding wet-location and coastal environments. Backed by a 10-year functional warranty and a lifetime warranty on the finish, it delivers dependable, code-compliant performance for professional landscape lighting projects.

Manufacturer Resources

Specification Sheet

Product Specs

Bulb Base:
LED Module - Transformer
Bulb Shape:
LED
Bulbs Included:
Yes
Collection:
Surface Mounted Indicator Light
Dimmable:
MLV
Energy Star:
No
Hardwired or Portable:
Hardwired
Number of Bulbs:
1
Product Type:
Path Lighting
Safety Rating:
UL;cUL;IP68
Shade/Glass Description:
Clear Glass Lens
Subcategory:
Path Indicator Light
Avg Rated Hours:
60000
Beam Spread Angle:
Flood
Product Voltage:
12
Product Material:
Stainless steel
Location Rating:
Wet
Total Wattage:
2.8
Product Style:
Modern

WAC Lighting 2531-27BS – Frequently Asked Questions

1) Can the WAC 25-IL indicator light be installed underwater in a pond or pool?
Yes. The 25-IL is factory sealed and water tight with an IP68 rating, protecting against submersion up to 5 meters, and it is rated for wet locations. Wells, ponds, pools, decks and patios are all listed applications, and the 316 marine grade stainless steel housing is recommended for coastal and marine environments.
2) What transformer do I need to run the WAC 25-IL?
It is a 12V low-voltage fixture and requires a Magnetic or Electronic 12V power supply; it will not run on line voltage. Input range is 9-15V AC and each light draws 2.8W (5VA), so size the transformer by total VA on the run. WAC's stainless steel outdoor transformers are the recommended pairing: 9075-TRN-SS (75W), 9150-TRN-SS (150W), 9300-TRN-SS (300W), and 9600-TRN-SS (600W).
3) What comes in the box with the 25-IL surface mounted indicator light?
The fixture ships with the LED already installed (one integral LED module, no lamp to buy), 3 ft of low voltage burial cable, direct burial gel filled wire nuts, and an optional spring retention clip. You supply the 12V transformer and any additional low-voltage cable.
4) Is the WAC 25-IL UL listed for landscape use?
It is UL and cUL 1838 Listed, the standard for low-voltage landscape lighting systems, and IP68 rated for wet locations. That covers both US and Canadian inspection on a low-voltage exterior circuit.
5) Will the 25-IL dim, and what kind of dimmer does it take?
It dims smoothly and continuously down to 10 percent, but only on a Magnetic Low Voltage (MLV) dimmer. Standard incandescent, ELV, or TRIAC LED dimmers are not the right control for this fixture.
6) Which color temperature should I order to match existing landscape lighting?
The 25-IL comes in 2700K and 3000K. 2700K reads warm and matches most incandescent-era landscape and step lighting; 3000K is slightly cleaner and is the usual choice alongside newer LED hardscape runs. Both are offered in polished stainless and bronze coated stainless.
7) Can I mount the 25-IL on a wall or ceiling instead of in the ground?
Yes. It is a surface mounted fixture intended for ceiling and wall installations indoors or out, as well as in-ground, well, and pond use. Mounting is hardwired to a 12V circuit, not plug-in, so plan a feed to the location.
8) How bright is the 25-IL and what is it meant to light?
Output is up to 80 lumens with a CRI of 85 and a flood beam through a clear glass lens. That is marker-level light, not task or area light. Use it to indicate step edges, path transitions, deck perimeters, and pond edges rather than to illuminate a walking surface.
9) What is the difference between the 2521, 2531 and 2551 models of the WAC indicator light?
Those are the three model designations the 25-IL surface mounted indicator light is ordered under, and each is available in 2700K or 3000K and in polished stainless steel or bronze coated stainless steel. The electrical platform is shared across them: 12V, 2.8W, IP68, 316 stainless. Specify model, color temperature, and finish together when ordering.
10) What finish of the WAC 25-IL should I use near salt water?
Both finishes are cast from 316 marine grade stainless steel, so the base metal is the same corrosion-resistant alloy either way. Choose polished stainless steel where you want the light to read as hardware, or the bronze coated stainless where you want it to disappear into decking or planting. The bronze coating adds a layer over the same 316 body.
11) How long before I have to relamp the 25-IL indicator lights?
There is no relamping. The LED is an integral module driven from the transformer, with a 60,000 hour average rated life. For an MRO or property maintenance plan, that means the fixture is replaced as a unit at end of life rather than serviced.
How fast can I get the WAC Lighting 2531-27BS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the WAC Lighting 2531-27BS come with a warranty?
Absolutely. The WAC Lighting 2531-27BS is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the WAC Lighting 2531-27BS?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the WAC Lighting 2531-27BS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!