You may also like
WAC Lighting Recessed Low Volt Trim Metal Trim Ring
Model: WAC-HR-836
2.5 inch Low Voltage Downlight TrimRecessed Low Volt Trim Metal Trim RingHR-836 - LED MR16 ( Order separately )FeaturesConstruction: 20 gauge steel with die-cast aluminum baffleAccommodates most LED...
WAC Lighting
Starting at
$42.00
$25.07
WAC Lighting Recessed Low Volt Trim Open Reflector
Model: WAC-HR-D412
4 inch Low Voltage Die-Cast Adjustable Specular Round TrimRecessed Low Volt Trim Open ReflectorHR-D412 - LED MR16 ( Order separately )FeaturesInput: 12 VACConstruction: Die-cast aluminumAccommodates...
WAC Lighting
Starting at
$52.00
$48.95
WAC Lighting Recessed Low Volt Trim Gimbal Ring
Model: WAC-HR-D417
4 inch Low Voltage Die-Cast Gimbal Ring TrimRecessed Low Volt Trim Gimbal RingHR-D417 - LED MR16 ( Order separately )FeaturesInput: 12 VACConstruction: Die-cast aluminumAccommodates most LED MR16...
WAC Lighting
Starting at
$54.00
$47.95
WAC Lighting Recessed Low Volt Trim Mini Round Adjust
Model: WAC-HR-837
2.5 inch Low Voltage Adjustable TrimRecessed Low Volt Trim Mini RND AdjustHR-837 - LED MR16 ( Order separately )FeaturesConstruction: 20 gauge steelAccommodates most LED MR16 lampsRetention clips...
WAC Lighting
Starting at
$28.00
$23.95
4 inch Low Voltage Die-Cast Adjustable Step Baffle Trim
Recessed Low Volt Trim Basic Baffle
HR-D411 - LED MR16 ( Order separately )
Features
- Input: 12 VAC
- Construction: Die-cast aluminum
- Accommodates most LED MR16 lamps
- Center lamp holder allows lamp to be tilted up to 35° from vertical
- The supplied clear glass lens can be replaced with one lens accessory
- Steel spring clips secure trim to housing
Manufacturer Resources:
Manufacturer Resources
Product Specs
- Product Group:
- Indoor Lighting
- Brand Family:
- WAC Limited
- Subcategory:
- Ceiling Lighting
- Segment:
- Lighting
WAC Lighting HR-D411-WT/WT – Frequently Asked Questions
1) Does the WAC HR-D411 trim come with a lamp, or do I order the MR16 separately?
The lamp is separate. The HR-D411 baffle trim accommodates most LED MR16 lamps, but no lamp ships with the trim, so add the MR16 to your order along with it.
2) Can the HR-D411 recessed trim be aimed, and how far will it tilt?
It adjusts. The center lamp holder lets the MR16 tilt up to 35 degrees off vertical, so you can angle it onto artwork or a wall wash without moving the housing. That is the aiming range for this die-cast step baffle trim.
3) Is the HR-D411 a line voltage trim or does it need a transformer?
Low voltage. The HR-D411 runs on 12 VAC, so it goes into a low voltage recessed housing with a transformer feeding it. If your ceiling has 120V line voltage cans, this is the wrong trim for that opening.
4) What aperture size is the WAC HR-D411 baffle trim?
It is a 4 inch low voltage trim, so it is matched to 4 inch low voltage recessed housings. Steel spring clips hold it into the housing, which is the standard retention method on that size.
5) Does the HR-D411 trim include a lens, and can I swap it for a different one?
A clear glass lens comes with the trim. WAC allows that clear lens to be replaced with one lens accessory if you want to diffuse or color the output, so the glass in the box is a starting point rather than a fixed part.
6) What finish does the WAC HR-D411 trim ship in for matching other ceiling openings?
White, ordered as HR-D411-WT/WT, which is a white baffle in a white trim ring. If you are standardizing a corridor or a run of units on white ceilings, that is the configuration to spec.
7) Why choose a baffle trim like the HR-D411 instead of a reflector trim?
A stepped baffle absorbs stray light at the aperture and cuts glare in the field of view, which is why it gets used in living spaces, guest rooms, and offices where people look toward the ceiling. A specular reflector pushes more raw lumens down and is better when you want maximum output on a work surface. The HR-D411 is the baffle version, with adjustable aim up to 35 degrees.
8) Is the die-cast body on this WAC trim worth it over a stamped one for hospitality or multi-family use?
The HR-D411 body is die-cast aluminum rather than thin stamped steel, which holds the aiming position better over repeated lamp changes and resists getting bent by housekeeping or tenant turnover. For a property manager cycling lamps in rental units, that is the practical difference.
How fast can I get the WAC Lighting HR-D411-WT/WT delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the WAC Lighting HR-D411-WT/WT come with a warranty?
Absolutely. The WAC Lighting HR-D411-WT/WT is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the WAC Lighting HR-D411-WT/WT?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the WAC Lighting HR-D411-WT/WT from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.