Door Stops, Holders, Silencers and Bumpers

1283 SERIES ADJUSTER STOPS & HOLDERS OVERVIEW The patented Trimco 1283 Adjustre Series is the only self-adjusting door holder manufactured. With a strike made of solid brass or bronze and featuring spring-loaded ball bearings allowing for tension...

ABH 3300A Series Surface Mount Overhead Stop & Holder Product Overview Surface Mount Medium Duty Stop, hold-open and friction functions avialable Single acting doors only Non-handed For interior use on moderate traffic and medium weight doors Degree...

MANUAL WALL HOLDERS - DRYWALL/WOOD/MASONRYHexagon section on unit aids in fastening unit when expansion shield is used;Replaceable black rubber bumpers feature off-set shoulder and threaded shank thatscrews into body of holder;Hinged strike furnished...

ROCKWOOD 486 Angle Door Stop Material: Steel with rubber bumper; Finishes: US2C; Features: For undercut doors up to 1-1/2".   ROCKWOOD OVERVIEW   Rockwood products are normally used on all types of institutional buildings, offices, retail,...

4" Contemporary Half-Cylinder Tip Baseboard Bumper, Solid BrassThe Deltana 4" Half-Cylinder Tip Baseboard Bumper features a dynamic design that allows wide or up-right installation. It is available in an array of fine finishes.U/M (Unit of Measure): each...

DON-JO 1420 Applied Floor Stop, 3 1/2" x 1 1/2" x 3/4", 10 Shelf PackProduct SpecificationsFinishes: 605, 613, 626Type: of Stop: Floor StopShelf Pack: 10Fasteners: 2 ea. #12 x 1-1/2" FFWS and 2 ea. 12-24 x 3/4" FHWS, For use with single or double doors...

DON-JO 1513 Hinge Pin Door Stop, Opens to 170 Degrees, Cast Zinc MaterialProduct SpecificationsFinishes: 613, 619, BP (Brass Plated), CP (Chrome Plated)Type: of Stop: Hinge Pin StopShelf Pack: 10Material: Cast Zinc

HAGER 257F FLOOR STOP   Finishes: US3, US10, US10B, US15, US15A, US19, US26, US26D; Features: One #14 x 1-1/2" FPHWS, one 1/4-20 x 3/4" FPHMS, one 5/16-18 lead anchor, one 1/4-20 lead anchor, one plastic anchor, one 5/16-18 x 2-1/2" threaded stud,...

1530 Series Made from rugged, extruded bronze, the 1540 Series Standard Duty Overhead Surface Mount is designed to protect door and hardware from daily abuse found in commercial and institutional applications. Ideally suited for interior doors, with...

1290, 1235, 1290 SERIES & 7010 BASE STOPS OVERVIEW Trimco’s Base Stop families offer a wide range of choices for multiple applications. From the extra rugged, heavy-duty 1298 stop to the 42F spring stop, to the modern design cues of the 7010...

Floor Door Bumper 2-1/2", Contemporary, Solid BrassDeltana Universal Floor Bumpers are available in different sizes and designs. They are available in an array of fine finishes that maintain quality.U/M (Unit of Measure): each - (Price displayed is per...

DON-JO 1465 Kick Down Floor Door Holder, Solid Brass MaterialProduct SpecificationsFinishes: 605, 613, 625, 626Type: of Stop: Door HolderANSI: L11382Shelf Pack: 10Material: Solid BrassModel 1465: 4" Projection, 4 ea. #8 x 1" SMS Base FastenersModel 1467:...

DON-JO HDCC 2512 Heavy Duty Crash Chain 25-1/2", Steel MaterialProduct SpecificationsFinishes DU, 626Product Type: Heavy Duty Crash ChainShelf Pack: 10Features: Gray vinyl coverPolybaggedMaterial: SteelANSI: AI56.3 LB2231Size 25-1/2"

Emtek 2259 Cylinder Floor Bumper with Dome Cap, 1-1/2"-Includes screws

60/61 BASE DOOR STOPS Simple to install - only a screwdriver required;Packed disassembled for quick installation;Available in three sizes to accommodate varying areas of installation and doortrim dimensions;White rubber tip. Note: 61A - 643E/716 ships...

Omnia 1148 Door Stop, Solid Brass  Product Overview Door Stop – Solid Brass Projection 3-3/4" Finishes US3, US10B, US15, US26, US26D, SB SKU 1148

ROCKWOOD 461L Kick Down Door Stop Material: Solid cast brass with rubber bumper; Other: Available in standard architectural finishes.Rubber bumper available in gray or black; Features: • Uses replacement bumper No. 461B• Rubber bumper...

1260W SERIES STOPS OVERVIEW The 1260 Series stops and holders with options for floor and wall mountings offer the utmost in flexibility for most any application. The optional pipe mounted strike is especially effective where paving or steps fall away...

Hinge Pin Stop for Steel Hinges, Hinge Mounted, Zinc Die-CastDeltana Hinge pin door stops are designed to install on an existing Hinge to restrict how far a door will swing open. They are available in an array of fine finishes.U/M (Unit of Measure): each...

HAGER Heavy Duty Floor Stop, 5/8" Steel Pin with Rubber Bumper, 1-1/2" High Bumper, 2" Diameter, Steel Bolt Box Quantity 5 Bumper Diameter 2" (51 mm) Bumper Height 1-1/2" (38 mm) Case Quantity 50 Certifications Exceeds the criteria set forth for a 300...

FS497 FLOOR STOP & AUTOMATIC HOLDER - 1" MAX CLEARANCEAutomatic door holders ideal for heavy-traffic situations that require a simple, holdopen device;Recommended installation is holder on door and strike on wall;Holder position on door is...

ROCKWOOD 463 HEAVY DUTY DOOR STOP Material: Flame resistant high impact bumper; Finishes: US26D; Mounting: Body: 1 ea. 1/2 x 4-1/2" lag bolt; 1 ea. shield; 2 ea. #8 x 11/4" FH SMS. Cap: 1 ea. #8 - 32 x 3/8" RH MS; Features: Offers maximum protection...

ROCKWOOD 468 HEAVY DUTY DOOR STOP Material: Wrought stainless steel and black rubber bumper; Finishes: US32D; Mounting: Drill 1-1/2" dia. x 7" deep hole, fill with anchoring grout; Features:  Ideal for use in high vandalism or security area No...

ROCKWOOD 471 DOOR STOP Material: Cast brass with rubber bumper; Finishes: Available in standard architectural finishes; Features: Exterior pack screw packs, stainless steel plated to match — use EXP suffix (470 x EXP) when...