Door Stops, Holders, Silencers and Bumpers

7280  SERIES FOCAL FLOOR STOPS & HOLDER OVERVIEW The 7280 fOCAL Series door stops were designed with an architect’s eye to deliver distinction to any project. Subtle visual appeal combines with strength and grace evident with the touch of...

ABH 1841 Ligature Resistant Wall Bumper Product Overview Wall Plate supplied with chamfered edges to prevent ligature attachment Material - High Density Rubber Stop; 304 Stainless Steel Plate “SEC” Security fasteners provided standard...

ABH 2300 Electromagnetic Door Holder (Surface Wall Mount with Standard Armature) 4-5/8" total projection from wall to face of door (4-5/8" if using complimentary 1" extension) Tri-voltage units for easy stocking and installation 12V DC, 24V AC/DC OR...

ABH 2400 Electromagnetic Door Holder Product Overview Optional extension rods fill the gap between the magnet and door armature with no special adapter piece required  35 lb. holding force All metal components - No plastic parts UL/ULC...

ABH 7000 Series Surface Mount Overhead Stop & Holder Product Overview Surface Mount Heavy Duty Stop, hold-open and friction functions available Single acting doors only Non-handed For interior or exterior use on frequent traffic and heavy weight...

BALDWIN RESERVE 4000 HALF DOME DOOR BUMPER OVERVIEW KEY FEATURES The Half Dome Door Bumper design minimizes stumbling hazards, wall damage and cleaning interference. 1" Height Thick solid rubber bumper is stylish and designed to offer greater resiliency...

Hinge Pin Stop, Door MountedInstall on door frame and door jamb for security holding door in place even if Hinges are tampered with. It comes packed with Hinge pin and sleeve.U/M (Unit of Measure): each - (Price displayed is per unit)Packed: 2 Pins Per...

Concave Flush Bumper 2-3/8" DiameterDeltana flush-mounted Bumpers are good solutions to suppressing the impact of a door to a wall. They are available in a variety of fine Finishes.U/M (Unit of Measure): each - (Price displayed is per unit)Diameter:...

Convex Flush Bumper 2-3/8" DiameterDeltana flush-mounted Bumpers are good solutions to suppressing the impact of a door to a wall. They are available in a variety of fine Finishes.U/M (Unit of Measure): each - (Price displayed is per unit)Diameter:...

DON-JO 1440 Floor Stop, 1/8" x 1 3/4" Base, 1" Height, Cast Brass MaterialProduct SpecificationsFinishes: 605, 606, 612, 613, 619, 622, 625, 626Type: of Stop: Floor StopANSI: L12141Shelf Pack: 20Material: Cast BrassFasteners: 1 ea. 1/4-20 x 1-1/4" MS,...

DON-JO 1476 Wall Door Stop, Cast Brass MaterialProduct SpecificationsFinishes 605, 613, 626Type: of Stop: Wall StopANSI: L12011Shelf Pack: 10Material Cast BrassFasteners: 3 ea. #10 x 1" SMS, 3 ea. Plastic AnchorsHeight 3-7/8"Base 2-1/4"Model 1478 Product...

DON-JO HDCC 2012 Heavy Duty Crash Chain 20-1/2", Steel MaterialProduct SpecificationsFinishes: DU, 626Product Type: Heavy Duty Crash ChainShelf Pack: 10Features: Gray vinyl coverPolybaggedMaterial: SteelANSI: AI56.3 LB2231Size 20-1/2"

FLOOR GOOSE NECKApplication: ResidentialDoor Thickness Range: 1.375” or 1.75”

ROCKWOOD 455 CURVED ROLLER STOP Material: Solid cast brass with rubber bumper; Finishes: Available in standard architectural finishes; Features: For use where doors swing into each other at odd angles;   ROCKWOOD OVERVIEW   Rockwood products...

ROCKWOOD 463 HEAVY DUTY DOOR STOP Material: Flame resistant high impact bumper; Finishes: Black; Mounting: Drill 1" dia. x 2-1/2" deep hole, fill with anchoring grout; Other:  Suitable for concrete floor or wall mounting Ideal for use in high...

ROCKWOOD 474 Door Stops Material: Cast brass with rubber bumper; Finishes: Available in standard architectural finishes;   ROCKWOOD OVERVIEW   Rockwood products are normally used on all types of institutional buildings, offices,...

ROCKWOOD 474 Door Stops Material: Cast brass with rubber bumper; Finishes: Available in standard architectural finishes;   ROCKWOOD OVERVIEW   Rockwood products are normally used on all types of institutional buildings, offices,...

ROCKWOOD 489 Door Stop Material: Solid brass; Finishes: US15; Features: For single or pair of doors.   ROCKWOOD OVERVIEW   Rockwood products are normally used on all types of institutional buildings, offices, retail, educational, detention,...

ROCKWOOD 526 Spring Base Door Stop Material: Spring steel; Finishes: Bright nickel; Features: Heavy spring construction for durable wear.   ROCKWOOD OVERVIEW   Rockwood products are normally used on all types of institutional buildings,...

1530 Series Made from rugged, extruded bronze, the 1530 Series Standard Duty Concealed Mount is designed to protect door and hardware from daily abuse found in commercial and institutional applications. Ideally suited as a concealed application for...

1560 Series The 1560 Series Electromagnetic Door Holder is designed for use with self-closing fire and smoke barrier doors. When deactivated, helps control the spread of fire and smoke by automatically releasing doors from an open position for...

590 Series Made from rugged, extruded bronze, the 590 Series Heavy Duty Overhead Surface Mount is designed to protect door and hardware from daily abuse found in commercial and institutional applications. With two types to choose from—"H” for...

Made from rugged, extruded bronze, the 690 Series Heavy Duty Overhead Concealed Mount is designed to protect door and hardware from daily abuse found in commercial and institutional applications. With two types to choose from—"H” for holder,...

1200 EXTRA HEAVY DUTY STOPS & HOLDERS Trimco 1209 Series heavy duty stops are ideal for high abuse installations like schools and prisons or with extra heavy duty doors. Constructed of extra high tensile strength steel and industrial rubber...