Parts and Accessories

Falcon SC80A-18 Mounting plate - Top jamb for SC80A Series Door Closers

Falcon SC81A-18FC Mounting Plate - Top Jamb Full Cover (FULLCOV) for SC81A Series Door Closers

Falcon SC80A-18PAFC Mounting plate PA for full cover for SC80A Series Door Closers Plate, SC80A-18PAFC Required for parallel arm mounting where top rail is less than 4 3⁄8" (111mm), measured from the stop. Plate requires 1 7 ⁄8" (48mm)...

Falcon SC80A-30 Cush shoe support for SC80A Series Door Closers Soffit shoe support, SC80A-30 Provides anchorage for fifth screw used with soffit shoe, where reveal is less than 3 1 ⁄16" (78mm).

Falcon SC81A-3049/PA Hold Open Arm with PA Bracket (HWPA) for SC81A Series Door ClosersB

Falcon SC81A-3049DS Hold-Open Dead Stop Parallel Arm (DSHO) for SC81A Series Door Closers  

Falcon SC81A-3049SS Hold-open Spring-n-stop Arm (SSHO) for SC81A Series Door Closers  

Falcon SC81A-3077DS Dead Stop Parallel Arm (DS) for SC81A Series Door Closers  

Falcon SC81A-3077SS Spring-n-stop Arm (SS) for SC81A Series Door Closers  

Falcon SC81A-61 Blade Stop Spacer for SC81A Series Door Closers  

Falcon SC81A-62A Offset Auxiliary Shoe for SC81A Series Door Closers      

Falcon SC80A-72 Slim cover (SLIMCOV) for SC80A Series Door Closers Cover, SC80A-72Standard, non-handed, slim line plastic cover encloses the closer body with a cap on the unused pinion shaft.

Falcon SC80A-72FC Full cover (FULLCOV) for SC80A Series Door Closers

Falcon SC81A-3071 Standard cylinder (CYL) for SC80A Series Door Closers

Falcon SC81A-3071DEL Delay cylinder (DEL) for SC80A Series Door Closers

Falcon SC90A-18 Mounting plate - Top jamb for SC90A Series Door Closers Plate, SC90A-18 Required for top jamb mounting where head frame is less than 1 3⁄4" (44mm) or flush ceiling conditions exists.

Falcon SC90A-18PA Mounting plate - Push side for SC90A Series Door Closers Required for parallel arm mounting where top rail is less than 4 5⁄8" (117 mm), measured from the stop. Plate requires 2 1⁄8" (54mm) minimum top rail measured from...

Falcon Standard screw pack for SC60A/80A Series Door Closers

HES 1000-102 1006 Series Rain Guard Rain, Rain Or High Dust Areas

HES 1000-104 1006 Series Extended Lip Adapter

HES 1000-110 Replacement Strike Plate, Fills Hole Left by 1006The HES 1000-110 is a replacement strike plate designed for the 1006 series electric strike.

HES 1000-130 KD Filler Plate For D Series Faceplates

HES 1006-105 1006 Series Trim Enhancer, Black For Use With: 1006 Electric Strike Function: Trim Adapter Product Type: Electric Strikes Parts/Accessorries

157 PRODUCT FEATURES Finish: Satin Stainless Steel Finish Description: Satin Stainless Steel Product Type: Electric Strike Part/Accessory ADA Compliant: No Finish Family: Stainless Steel Fasteners: (2) 12-24 UNC x 3/4" [19mm] FH Pin-in-Torx®...