Ives

  For Large Item, additional shipping charges may apply. Large Item is considered any product greater than 92".     700 FULL MORTISE PIN AND BARREL CONTINUOUS HINGE -...

  For Large Item, additional shipping charges may apply. Large Item is considered any product greater than 92".     611 SWING CLEAR PIN AND BARREL CONTINUOUS HINGE - STEEL...

  For Large Item, additional shipping charges may apply. Large Item is considered any product greater than 92".     602 FULL SURFACE PIN AND BARREL CONTINUOUS HINGE - STEEL ...

  For Large Item, additional shipping charges may apply. Large Item is considered any product greater than 92".   600 FULL MORTISE PIN AND BARREL CONTINUOUS HINGE - STEEL 1/4"...

1000 SERIES RESIDENTIAL HINGES   3.5 x 3.5 plain bearing hinges Button non-rising pins and caps Recommended for doors weighing less than 70 lbs and not exceeding 3'0" x 7'0" Recommended for...

5BB1HW SC/BSC 5 KNUCKLE, BALL BEARING, HEAVY WEIGHT FULL MORTISE HINGE   Recommended for heavier weight doors (>150 lbs); Recommended for high frequency usage (400 cycles per day); Made with...

3SP1 3 KNUCKLE, SPRING FULL MORTISE HINGE For use with doors where self-closing is required; Maximum door weight 120 lbs, max door width 36"; Maximum labeled door size - 3'0" wide x 7'0"...

3CB1WT 3 KNUCKLE, CONCEALED BEARING, WIDE THROW FULL MORTISE HINGE   Recommended for medium weight doors (<150 lbs);  Recommended for medium frequency usage (<400 cycles per...

Ives 3CB1 STEEL 3 KNUCKLE, CONCEALED BEARING FULL MORTISE HINGE   Recommended for medium weight doors (<150 lbs);  Recommended for medium frequency usage (<400 cycles per...

SR65 DOOR SILENCER - WOOD For use on wood frames, also feature pneumatic design to cushion shock and absorb noise; To prevent removal, a small brad should be driven into stop strip and...

SR64 DOOR SILENCER - METAL For use on metal frames featuring pneumatic design that, once installed,forms an air pocket to absorb shock and reduce noise of door closing; Tamper-proof once...

73 HINGE PIN DOOR STOPS  Economical solution for use on low frequency, 4 1/2" hinges or above hinged doors where the installation of a standard door stop or overhead is not desirable; 85°...

RB470 OFFSET ROLLER BUMPER RB470 Offset roller bumper. Used where two doors open against each other to prevent;damage to the doors or hardware; Grey rubber roller; Packed with...

FS1153 PLUNGER TYPE DOOR HOLDER Provides a contemporary yet economical method of positive hold-open; Spring operated plunger activates with minimal pressure, releasing instantly witha light tap...

411R-W WALL BUMPER - ADHESIVE Adhesive-backed wall door stop for use on clean, smooth, flat surfaces only; Non-marring white rubber; Concave design permits knob to strike stop without...

WALL STOP - DRYWALL/WOOD/MASONRY Hexagon section on unit aids in fastening unit when expansion shield is used; Replaceable black rubber bumpers features off-set shoulder and threaded shank...

FS497 FLOOR STOP & AUTOMATIC HOLDER - 1" MAX CLEARANCE Automatic door holders ideal for heavy-traffic situations that require a simple, holdopen device; Recommended installation is...

FS496 FLOOR STOP & AUTOMATIC HOLDER - 3/8" MAX CLEARANCE Automatic door holders ideal for heavy-traffic situations that require a simple, holdopen device; Recommended installation is...

FS9 FLOOR STOP & SEMI-AUTOMATIC HOLDER Semi-automatic floor-mounted holders accommodates with door to floor clearance of1-1/2" or less; Activate holder by flipping the engagement...

FS434 FLOOR STOP For undercut doors up to 1-1/2"; Packed with fasteners for light duty masonry and wood applications; Soft, resilient black rubber. IVES DOOR STOPS OVERVIEWWith a full...