Metallics

Washers 1/2 X 2 Fender St-zn (Jar 100) Special Features Features: A Larger Diameter for Greater Bearing Surface

Nuts 5/16-18 Stamp Wing Nut SS (Jar 100) Features Designed for Rapid Assembly and Disassembly by Hand Additional Notes Other sizes and quantities available by request, Does not specify dimensions...

Anchors 3/4 x 4-1/4 Wdg SS (Jar 10)

12 x 1-1/4 in. Pan Head Square Drive Tapping Screws - Steel Zinc - 100qty Additional Notes Other sizes and quantities available by request | This type of recess has a square center opening, slightly...

10 x 1/2 in. Pan Head Square Drive Tapping Screws - 18-8 Stainless - 100qty Features Fastening stainless steel parts to aluminum or steel can cause a type of corrosion known as a galvanic couple in...

Anchors 1/2 x 12" Hx Hd Lg Dia CS St-zn (Box 5)

Anchors 1/4 X 1-3/4 Wedge Ancr SS (Jar 100)

10 x 1-1/4 in. Pan Head Tri-Drive Tapping Screws - Steel Zinc - 100qty Features Pan head with slotted, Phillips and square Drive 10 Diameter, 1-1/4" Length Made in the USA Steel Zinc Material

10 x 1-1/4 in. Pan Head Phillips Sharp Point Tapping Screws - Steel Zinc - 1000qty Features Steel Zinc Material 10 Diameter, 1-1/4" Length Pan head with Phillips Drive Additional Notes Other...

Anchors 1/2 x 6-1/2" Hx Hd Lg Dia CS SS (Box 20)

8 x 1/2 in. Flat Head Phillips Tapping Screws - Steel Zinc - 100qty Additional Notes Other sizes and quantities available by request | Dimensions for #9 diameter are independent of ASME B18.6...

10 x 2 in. Flat Head Phillips Tapping Screws - Steel Zinc - 100qty Features Flat head with Phillips Drive Steel Zinc Material 10 Diameter, 2" Length Additional Notes Other sizes and quantities...

Screws 14 x 1-1/4 Fh Ph SMA Zn (Jar 100)

Anchors 5/8 X 3-1/2 Wedge Ancr St-zn (Jar 25)

Anchors 1/2 X 2-3/4 Wedge Ancr St-zn (Jar 50)

Anchors 1/2 X 4-1/4 Wedge Ancr St-zn (Jar 25)

3/8-12 x 1 in. Hex Head Self-Drilling Screws with Bonded Sealing Washer - #3 Drill Point - Steel Zinc - 50qty Additional Notes Economical fasteners for applications requiring a weather-tight...

12 x 3 in. Pan Head Combo Sharp Point Tapping Screws - Steel Zinc - 100qty Features Pan head with Phillips and slotted Drive Steel Zinc Material 12 Diameter, 3" Length Additional Notes Other...

10 x 1 in. Pan Head Phillips Sharp Point Tapping Screws - Steel Zinc - 100qty Additional Notes Other sizes and quantities available by request | Dimensions for #9 diameter are independent of ASME...

8 x 1 in. Pan Head Square Drive Tapping Screws - Steel Zinc - 100qty Features Pan head with square Drive Steel Zinc Material 8 Diameter, 1" Length Additional Notes Other sizes and quantities...