Push/Pull Hardware

DON-JO 10 Door Pull, Cast, 5-1/2" CTC, 6-1/2" Overall, 1-3/4" Projection, 1-5/16" ClearanceProduct SpecificationsFinishes: 605, 612, 613, 628, 630Product Type: Door PullANSI: J401Shelf Pack: 1Projection 1-3/4"CTC 613 & 630 are 5-1/2" CTC - 605 &...

DON-JO 16 Door Pull, Cast, 8" CTC, 8-3/4" Overall, 2-1/4" Projection, 1-1/2" ClearanceProduct SpecificationsFinishes: 605, 606, 613, 628, 629, 630Product Type Door PullANSI: J401Shelf Pack: 1Projection 2-1/4"CTC 8"Diameter 3/4"Overall 8-3/4"Clearance...

DON-JO 32 Door Pull, Cast, 10" CTC, 10-3/8" Overall, 2" Projection, 1-5/8" ClearanceProduct SpecificationsFinishes: 605, 613, 628, 630Product Type: Door PullANSI: J401Shelf Pack: 1Projection 2'CTC 10"Diameter: 3/8" x 1-1/4"Overall 10-3/8"Clearance 1-5/8"

DON-JO 42 Door Pull, Cast, 5" CTC, 8-1/8" Overall, 2-1/2" Projection, 8-1/8" ClearanceProduct SpecificationsFinishes: 630Product Type: Door PullANSI: J401Shelf Pack: 1Projection 2-1/2"CTC 5"Overall 8-1/8"Clearance 2-1/8"

DON-JO 44 Door Pull Surface Mount Cast, Satin Chrome FinishProduct SpecificationsFinishes: 605, 630Product Type: Door PullANSI: J401Shelf Pack: 1Projection 3-5/16"CTC 6"Overall 9.25"Clearance 2.75"

DON-JO 69 Push Plate 3" by 12"Product SpecificationsFinishes: 605, 606, 609, 612, 613, 619, 628, 629, 630Product Type: Push PlateANSI: J301Shelf Pack: 10Length: 12"Width: 3"

DON-JO 7037 Pull Plate, 15" by 3-1/2", 2" Projection, 8" CTC, 1-1/2" ClearanceProduct SpecificationsFinishes: 605, 613, 630Product Type: Pull PlateANSI: J405Shelf Pack: 1Length: 15"Width: 3-1/2"Projection 2"CTC 8"Diameter: 1" Half RoundClearance 1-1/2"

Emtek Lost Wax Cast Bronze Column 8" Door Pull

• Pull plate and pull must be ordered separately.• Standard door thickness of 1-3/4”. Specify if thicker.• Supplied with matching screws.

Emtek Ribbon and Reed 8" Door Pull- May be used separately or with pull plates

Emtek Rod Bronze 18" Door Pull

Emtek Wrought Steel Normandy 8" Door Pull

8111-5 SOLID DOOR PULLSizes: 5-1/4"Mounting 1/4-20 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. Comes...

8181 GEORGIAN 90° OFFSET SOLID DOOR PULL1" Round pull (Grip Area 1-1/4")Available sizes: 12", 16", 18" MountingHeavy duty mounting hardware exceeds industry standards3/8-16 mounting hardwareSpecify door thickness. Standard mounting hardware for door...

8189 ATHENS OFFSET TUBULAR DOOR PULL1-1/4" Diameter pull bar with 1-1/4" Diameter mounting postsAvailable sizes: 19-3/16" Substrate SelectionsFinish 630 and 631 is for an Stainless Steel substrateAll other finishes are for a Brass substrateIVES...

9103EZHD SOLID STRAIGHT PULL/PUSH BAR COMBOAvailable in standard lengths of 28” and 33”.Also available in whole 1" increments from 25" to 45".Other lengths available as engineering special, consult customer service.IVES ARCHITECTURAL PULLS...

919 DECORATIVE FLUSH PULL - OVALContoured for ease of pulling;Packaged with fasteners for wood applications. Surface: 6 X 3/4" OH PH.IVES DECORATIVE FLUSH PULLS OVERVIEWFlush pulls help maximize the space-saving benefits derived from installing sliding...

955 DECORATIVE FLUSH PULL - SQUARE, DEEP WELLFeatures a finger pocket for ease of pulling;Packaged with fasteners for wood applications. Exposed 6 X 3/4" FH PH.IVES DECORATIVE FLUSH PULLS OVERVIEWFlush pulls help maximize the space-saving benefits...

Ives VR810-DT/VR814-DT Vandal Resistant Dummy Trim (with and without black grip)Closed pull design eliminates a hooking point to be able to forcibly pull a secured door open;Ligature resistant design;For use with Falcon XX, 18 or 25 Series exit...

VR900/VR904Closed pull design eliminates a hooking point to be able to forcibly pull a secured door open;Ligature resistant design;For use with most mortise locks on outswinging doors including Schlage L9000 Series with interior L or N escutcheon, and...

VR910M-DT/VR910M-DTClosed pull design eliminates a hooking point to be able to forcibly pull a secured door open;Ligature resistant design;For use with Von Duprin 9875/9975 mortise lock exit device;Built-in lock protector prevents...

Omnia 1969P Modern Appliance/Door Pull, Forged Solid Brass, 1-3/4" Projection Product Overview Modern Appliance/Door Pull – Forged Solid Brass Striking solid brass cabinet and appliance/door pulls that are forged and precision machined in Italy. In...

Omnia 9009 Modern Appliance/Door Pull, Solid Brass Product Overview The Omnia Collection is manufactured of solid brass which leaves lasting beauty and richness of finish and endurance. You will find that Omnia offers many different designs that have...

ROCKWOOD 110 x 70 Pull Pates Material: Stainless steel; Finishes: US32D; Fastner: #6 x 5/8" OH SMS; 1/4 - 20 x 2-1/4" thru bolt & finish washer(standard 13/4" door); Options: Barrier Free available in 2-1/2" clearance — use BF prefix when...