Push/Pull Hardware

ROCKWOOD 94L Flush Pull Material: Stainless steel; Finishes: US32D; Fastner: 1/4- 20 x 1-1/2" thru bolt & finish washer (standard 1-3/4" door). Features: Includes lugs for thru bolt. No fasteners on pull side Options: TORX – security Torx...

ROCKWOOD Series 47 Offset Single Bar Sets Material: Aluminum, brass, bronze, stainless steel; Finishes: Available in standard architectural finishes; Options: Engraving “PUSH” or “PULL”. Specify handing Base plates available...

ROCKWOOD SD1230 Standard Duty Protector Bars Material: Stainless steel; Finishes: US32D; Fastner:#10-24 x 1 FH MS and sex bolt   ROCKWOOD OVERVIEW   Rockwood products are normally used on all types of institutional buildings, offices, retail,...

Schaub 10022 5" Center to Center Baker Edge Pull Style: ContemporaryCollection: BakerFinish: Brushed NickelFunction: Edge PullProjection: 2Base Material: Solid BrassCA Residents: Proposition 65 WarningBase...

TRIMCO 1191 OFFSET GRIPS OVERVIEW Trimco’s Offset Grips are a great compliment to any building design. These grips are offered in 3/4″ to 1-1/4″ round stainless steel, bronze, brass or aluminum and in most architectural finishes to...

TRIMCO 1896-4B PUSH/PULL PLATE OVERVIEW 1896-4B Push/Pull Plate. Push/Pull Plate 4" x 16" Grip 10" CC 1" dia with Rounded Bevel Top & Bottom Edges. The 1894/1895 Heavy Duty Combo Push/Pull Plate Sets are clean looking with no screw mountings on the...

242 SERIES FLUSH CUP PULLS OVERVIEW Trimco’s 242/248 Series Flush Cup Pulls are designed for use with sliding doors. Applications include closet doors, non-locking pocket doors, cabinets and more. Available in brass, bronze or plated steel, these...

553 & 562 SERIES CABINET PULLS VIEWERS OVERVIEW Trimco offers a variety of Cabinet Pulls to suit many applications. From economical wire pulls (562) to heavy-duty pulls (553), Trimco has great options for your project. Trimco’s pulls are...

TRIMCO AP221 1" DIAMETER ARCHITECTURAL OFFSET BENT PULLS OVERVIEW AP221 1" Diameter Architectural Offset Bent Pulls. 1" Diameter Offset Pulls. Trimco’s AP200 Series Architectural Offset Bent Pulls are a great compliment to any building design...

TRIMCO AP521 1-1/4" DIAMETER BLACK ANODIZED ARCHITECTURAL PULL STRAIGHT STANDOFFS SQUARE ENDS OVERVIEW AP521 1-1/4" Diameter Black Anodized Architectural Pull Straight Standoffs Square Ends. 1-1/4" Diameter Straight Standoffs Square Ends. Trimco’s...

TRIMCO AP712 3/4" SQUARE END POSTS ARCHITECTURAL LADDER PULL OVERVIEW AP712 3/4" Square End Posts Architectural Ladder Pull. 3/4" Square Bridge Posts. Trimco’s AP700 Series Square & Rectangular Ladder Pulls are precision crafted for beauty and...

Ives PR-9266/9266F Long Door Pull Pair, 1-1/4″ Diameter, Back-to-Back Mount Offered in 316 stainless steel, the long pulls exceed industry standards for corrosion resistance in exterior applications. Ives long pulls coordinate seamlessly with other...

BALDWIN Estate 4704 1" Diameter Classic Knob KEY FEATURES Inspired by the past but made for today, this classic never goes out of style. 4704 Classic Knob 1" Diameter and .94” Projection Nickel-plated brass creates a crisp and clean look for...

Cal-Royal PUL203 Solid Bar Round Pull 3/4" Diameter, 2-1/4" Projection, 8" CTC Product Overview Specifications and Features Stainless Steel, Brass and Aluminum Material Type 1 Thru-Bolt Mount for 1 ¾” thick doors Solid...

Door Pull without Rosette, 8"Deltana Door Pulls come in a variety of sizes and are available in an array of fine finishes.DP2574 is compatible with the PPH3515 Push Plate.U/M (Unit of Measure): each - (Price displayed is per unit)Material: Solid...

Flush Pull, Victorian, Heavy Duty, 7" x 2-1/4" x 5/8", Solid BrassDeltana Flush Pulls are used in any door where a face flush installation is desired, like Sliding Doors, Cabinet doors and Pocket doors. They are available in an array of fine finishes.U/M...

DON-JO 1156 Door Pull, 90 degrees Offset, 3-1/2" Projection, 2-1/2" ClearanceProduct SpecificationsFinishes: 313, 315, 605, 628, 629, 630Product Type: Door PullANSI: J402Shelf Pack: 1Offset 90 degreesProjection 3-1/2"CTC 8", 9", 10", 12", 18"Diameter:...

DON-JO 1160 Door Pull, 90 degrees Offset, 3-1/2" Projection, 2-1/2" ClearanceProduct SpecificationsFinishes: 313, 315, 605, 628, 629, 630Product Type: Door PullANSI: J402Shelf Pack: 1Offset 90 degreesProjection 3-1/2"CTC 8", 9", 10", 12", 18"Diameter:...

DON-JO 7015 Pull Plate with Round PullProduct SpecificationsFinishes: 605, 606, 613, 628, 629, 630Product Type: Pull PlateANSI: J405Shelf Pack:...

Emtek Rod Bronze 13-3/4" Door Pull

Emtek Twig Bronze 8" Door Pull- May be used separately or with pull plates

Emtek Wrought Steel San Carlos 8" Door Pull

HAGER 2630 Round Flush Pull, 2-7/16" Overall Diameter, 2-1/16" Finger Pull Diameter   Case Quantity 50 Depth 11/32" (9 mm) Diameter Overall 2-7/16" (62 mm), Finger pull 2-1/16" (52 mm) Finishes US3, US4, US5, US10A, US15, US15A, US26, US26D,...

8311 PULL PLATEMounting 1/4-20 mounting hardware; Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors; Comes standard with through...