Push/Pull Hardware

TRIMCO AP436 1-1/2" DIAMETER ARCHITECTURAL LADDER PULL OFFSET STANDOFFS ANGLED ENDS OVERVIEW AP436 1-1/2" Diameter Architectural Ladder Pull Offset Standoffs Angled Ends. 1-1/2" Diameter Offset Standoffs Angled Ends Specify Handing. Trimco’s AP400...

TRIMCO AP732 1-1/4" SQUARE END POSTS ARCHITECTURAL LADDER PULL OVERVIEW AP732 1-1/4" Square End Posts Architectural Ladder Pull. 1-1/4" Square End Posts. Trimco’s AP700 Series Square & Rectangular Ladder Pulls are precision crafted for beauty...

Cal-Royal PUL205 Solid Bar Round Pull 3/4" Diameter, 2-1/4" Projection, 5-1/2" CTC Product Overview Specifications and Features Stainless Steel, Brass and Aluminum Material Type 1 Thru-Bolt Mount for 1 ¾” thick doors Solid...

Door Pull, 6"Deltana Door Pulls come in a variety of sizes and are available in an array of fine finishes.U/M (Unit of Measure): each - (Price displayed is per unit)Material: Solid BrassLength: 6"Manufacturer Resources:

Emtek Blythe Appliance Pull, 12" and 18" Appliance PullsSold as complete set. Includes screws.

8103HD SOLID DOOR PULL - 1" ROUNDAvailable Sizes: 8", 10", 12";Heavy duty mounting hardware exceeds industry standards;5/16-18 mounting hardware;Standard mounting hardware for door thickness of 1-1/2" to 1-3/4";Comes standard with through bolt screws and...

9190EZHD SOLID 90° OFFSET PULL/PUSH BAR COMBOAvailable in standard lengths of 28” and 33”. Also available in whole 1" increments from 25" to 45". Other lengths available as engineering special, consult customer service.IVES ARCHITECTURAL...

Omnia 9006P Modern Appliance/Door Pull, Solid Brass, 2" Projection Product Overview Modern Appliance/Door Pull – Solid Brass Dimensions 17-5/16" (440mm) cc., 17-15/16" oa., 2" proj., 1"...

ROCKWOOD 130 Cast Door Pull Material: Cast aluminum, brass, stainless steel; Finishes: UD26D; Fastner:1/4 - 20 x 2-1/4" thru bolt & finish washer (standard 13/4" door); Features: Advise if door thickness is other than 1-3/4" See page B13 for...

TRIMCO 1041/1056 HALF-ROUND PULL PLATES OVERVIEW  The Trimco 1041/1056 Series Pull Plates combine an 8″x16″ half-round push plate with the 1139 Bar Pull into a unique and stylish design. These pulls are ADA compliant and can be...

Delaney 3-1/2" x 15" Push Plate Stainless Steel base metal for US32D Finish - Satin Stainless Steel Solid Brass base metal for US10B Finish - Oil Rubbed Bronze Dimensions: 3-1/2" x 15"

Flush Pull, Large, 3-5/8" x 1-3/4" x 1/2"Deltana Flush Pulls are used in any door where a face flush installation is desired, like Sliding Doors, Cabinet doors and Pocket doors. They are available in an array of fine finishes.U/M (Unit of Measure): each...

DON-JO 11 Door Pull, Cast, 5-1/2" CTC, 6-1/2" Overall, 1-3/4" Projection, 1-5/16" ClearanceProduct SpecificationsFinishes: 605, 606, 613, 628, 629, 630Product Type: Door PullANSI: J401Shelf Pack: 1Projection 2"CTC 5-1/2"Diameter: 5/8"Overall...

DON-JO 17 Door Pull, Cast, 10" CTC, 10-3/4" Overall, 2-1/4" Projection, 1-1/2" ClearanceProduct SpecificationsFinishes: 605, 606, 613, 628, 629, 630Product Type: Door PullANSI: J401Shelf Pack: 1Projection 2-1/4"CTC 10"Diameter: 3/4"Overall 10-3/4"

Emtek Keaton Appliance Pull, 12" and 18" Appliance PullsSold as complete set. Includes screws. 

Material: Aluminum, Brass, Bronze, or Stainless Steel Mounting Metal & Wood Door: Type 1, 1⁄4 -20 x 2-1⁄4" Thru Bolt & Finish Washer (standard 1-3⁄4" door) Metal Door: Type 6, Concealed, 1/4-20 CH MS Type 5HD: Back to Back...

TRIMCO 1807/1809 EXTRA HEAVY DUTY PUSH PLATES BEVELED TOP & BOTTOM OVERVIEW  Trimco’s 1807/09 Series Heavy Duty Push Plates are manufactured in the United States using 1/8″ stainless steel, brass or bronze for extra strength and...

TRIMCO 1895-4 ULTIMATE RESTROOM PUSH/PULL PLATE COMBO OVERVIEW 1895-4 Ultimate Restroom Push/Pull Plate Combo. Push/Pull Plate Combo 4" x 16" with 1" dia. 8" CTC Pull Rounded Bevel Top & Bottom Edges. The 1894/1895 Heavy Duty Combo Push/Pull Plate...

TRIMCO AP423 1-1/4" DIAMETER ARCHITECTURAL LADDER PULL OFFSET STANDOFFS SQUARE ENDS OVERVIEW AP423 1-1/4" Diameter Architectural Ladder Pull Offset Standoffs Square Ends. 1-1/4" Diameter Offset Standoffs Square Ends. Trimco’s AP400 Series Ladder...

AP500 SERIES ANODIZED GRIP LADDER PULLS Trimco’s AP500 Series Anodized Grip Ladder Pulls add style and sophistication to any opening. A multitude of options enable customization flexibility to enhance surrounding building aesthetics. Options...

Delaney 15-3/4" Single Sided Round, Barn Door Pull Handle Finish Black (US19) Oil-Rubbed Bronze (US10B) Satin Nickel (US15)

Flush Pull, 4" x 1" x 1/2"Deltana Flush Pulls are used in any door where a face flush installation is desired, like Sliding Doors, Cabinet doors and Pocket doors. They are available in an array of fine finishes.U/M (Unit of Measure): each - (Price...

12" Contemporary Pulls, Single SideDeltana Contemporary Stainless Steel Pulls are available in 3 lengths, they come in an array of fine finishes and kits include installation hardware required for glass and wood doors.U/M (Unit of Measure): each - (Price...

DON-JO 1150 Door Pull, 90 degrees Offset, 2-1/2" Projection, 3/4" Diameter, 1-3/4" ClearanceProduct SpecificationsFinishes: 605, 613, 628, 629, 630Product Type: Door PullANSI: J402Shelf Pack: 1Offset 90 degreesProjection 2-1/2"CTC 8", 10", 12"Diameter:...