Door Latches and Catches

Ball Tension Catch 3" x 3/4"Deltana Ball Tension Catches are commonly used on Cabinet doors closets or other lightweight doors. They are Adjustable and available in an array of fine finishes.U/M (Unit of Measure): each - (Price displayed is per...

DON-JO 1710 Roller Latches with Full Lip Strike, 3-3/8" x 7/8", Cast BrassProduct SpecificationsFinishes: 605, 613, 619, 620, 626Product Type: Roller LatchesANSI: L17802Shelf Pack: 10Features: Solid nylon roller for silent operationAdjustable roller...

BALDWIN RESERVE 0426 DOOR ADJUSTABLE BALL CATCH OVERVIEW KEY FEATURES Adjustable Ball Catch is perfect for use on louvered, bi-folding, accordion, closet, and light to medium service doors. 1" x 2.125" Comes equipped with a dual adjustment ball bearing...

Magnetic Catch 3-1/8" x 1" x 9/16"Deltana Magnetic Catches are designed to eliminate the need for Latch hardware on a door for a cleaner look and more economical installation.Finish:U/M (Unit of Measure): each - (Price displayed is per unit)Material:...

RL30 ROLLER LATCHRecommended for higher traffic applications;Actuation is simple, closing of the door causes the roller to fall in the depression of the strike, thereby holding the door closed;The projection of the roller is easily adjusted using...

ROCKWOOD 900 Heavy Duty Magnetic Catch Material: Aluminum; Finishes: Natural Aluminum (ALM); Fastner:Body: 2 ea. #6 x 1-1/4" TH SMS; Strike: 2 ea. #6 x 1/2" FH SMS Features: Includes installation instructions Dual triple-pole, self-aligning...

349 BALL CATCH, DUAL ADJUSTABLE - ROUNDED CORNERSRecommended for lower frequency opening applications;For catch in door installations;Radiused corners allow easy installation with a router;Dual adjustment for door clearance and holding strength;Lip...

ROCKWOOD 590 ROLLER LATCH WITH CAST STRIKE Material: Cast brass; Finishes: Available in standard architectural finishes; Finishes: Body: 2 ea. #8 x 3/4" FH combo screws; Strike: 2 ea. #8 x 3/4" FH combo screws; Features: Solid nylon roller for durable...

ROCKWOOD 591 ROLLER LATCH WITH ASA STRIKE Material: Cast brass; Finishes: Available in standard architectural finishes; Fastner: Body: 2 ea. #8 x 3/4" FH combo screws; Strike: 2 ea. #12 - 24 x 1/2" FH MS; Features: Solid nylon roller for durable silent...

Cal-Royal ARL-1338 Heavy Duty Roller Catch Product Overview Specifications and Features Size: 1/8" x 1" x 3-3/8" Depth: 1-13/16" Adjustable Nylon Roller Packed with square heavy duty cast: 2-1/4" Full lip strike Solid Brass Conforms to ANSI/BHMA A156...

ROCKWOOD 593 ROLLER LATCH WITH ANGLE STOP Material: Cast brass; Finishes: Available in standard architectural finishes; Fastner: Body: 2 ea. #12 x 1-1/2" FH WS; Strike: 2 ea. #8 x 3/4" FH combo screws Features: Mounts in header with strike in top of...

SPECIFICATIONS Bullet Size: 13/16” Diameter Hole Size: 7/8” Diameter, 1-1/8” Depth Complete with 1-3/8” x 2-1/4” Round CornerFull Lip Strike Provided with Four Screws

Generally used on closet doors where latch is not used or needed Diecast material Jamb-mounted lip strike Conforms to ANSI / BHMA A156.9 B23013 Architectural finishes available

ROCKWOOD 911 Adjustable Ball Catch - Square Corners Material: Brass; Finishes: US26D; Fastner: 4 ea. #6 x3/4" FH SMS Other: Wide strike for mounting on jamb, catch in door Features: Dual adjustment for door clearance and holding...

Delaney Drive-In Ball Catch Strike Plate 2-1/4" Wide Mounting Hardware: Two 3/4" Length Screws Included Material: Zinc

DON-JO 1714 Ball Latches, 2-1/4" Length, Cast Aluminum MaterialProduct SpecificationsFinishes: 605, 609, 613, 619, 620Product Type: Ball LatchesShelf Pack: 20Features: Packed with full lip round corner strikeMaterial: Cast AluminumLength: 2-1/4"Width: 1"

CL21 BALL CATCHFour-way catch with hexagon stud;Ideal for holding medium duty doors;The strike slides between two stainless steel balls that are under spring tension.As the strike engages, the door is held tightly shut;Strike can enter body from any...

RL32 ROLLER LATCHRecommended light duty cabinet and closet applications;Actuation is simple, closing of the door causes the roller to fall in the depression of the strike, thereby holding the door closed;The projection of the roller is easily adjusted by...

ROCKWOOD 591 ROLLER LATCH WITH ASA STRIKE Material: Cast brass; Finishes: Available in standard architectural finishes; Fastner: Body: 2 ea. #8 x 3/4" FH combo screws; Strike: 2 ea. #8 x 3/4" FH combo screws; Features: Solid nylon roller for durable...

ROCKWOOD 910RC Narrow Strike Adjustable Ball Catch - Square Corners Material: Brass; Finishes: US26D; Fastner: 4 ea. #6 x3/4" FH SMS Other: Narrow strike for mounting on door, catch in jamb Features: Dual adjustment for door clearance and holding...

HAGER 3955/3956 Key Blank C Keyways   Keyway: Schlage C Notes: Keys cut bow to tip Key Blank (5-Pin/6-Pin)

BALDWIN 0440-150 Adjustable Roller Catch, Satin Nickel Finish Door Hardware Parts With Baldwin you can confidently move on from your door to the precisely right drawer and cabinet hardware The product is manufactured in China Face: 1"W x 2 1/4"H Bore:...

Manufactured from wrought brass Adjustable threaded barrel for accommodating various door clearances Conforms to ANSI / BHMA A156.9 B23013 Architectural finishes available

Delaney Mortise Ball Catch Strike Plate 2-1/4" Wide Mounting Hardware: Two 3/4" Length Screws Included Material: Zinc