Push/Pull Hardware

DON-JO 69 Push Plate 3" by 12"Product SpecificationsFinishes: 605, 606, 609, 612, 613, 619, 628, 629, 630Product Type: Push PlateANSI: J301Shelf Pack: 10Length: 12"Width: 3"

DON-JO 7037 Pull Plate, 15" by 3-1/2", 2" Projection, 8" CTC, 1-1/2" ClearanceProduct SpecificationsFinishes: 605, 613, 630Product Type: Pull PlateANSI: J405Shelf Pack: 1Length: 15"Width: 3-1/2"Projection 2"CTC 8"Diameter: 1" Half RoundClearance 1-1/2"

Emtek Lost Wax Cast Bronze Column 8" Door Pull

• Pull plate and pull must be ordered separately.• Standard door thickness of 1-3/4”. Specify if thicker.• Supplied with matching screws.

Emtek Rod Bronze 18" Door Pull

Emtek Wrought Steel Normandy 8" Door Pull

HAGER 25N   Certifications: Meets ANSI A156.6 for J403 pulls Cup Clearance: 3/4" (19 mm) Door Thickness: 1-3/4" (44 mm) standard Fasteners: Two 6-32 OPHMS sex nuts and bolts Finishes: US3, US4, US10, DBZ, US26, US26D, US28, US32D Material:...

8111-5 SOLID DOOR PULLSizes: 5-1/4"Mounting 1/4-20 mounting hardware Specify door thickness. Standard mounting hardware for door thickness of 1-1/2" to 1-3/4" unless otherwise specified. Optional package available for 2" and 2-1/4" thick doors. Comes...

8181 GEORGIAN 90° OFFSET SOLID DOOR PULL1" Round pull (Grip Area 1-1/4")Available sizes: 12", 16", 18" MountingHeavy duty mounting hardware exceeds industry standards3/8-16 mounting hardwareSpecify door thickness. Standard mounting hardware for door...

8189 ATHENS OFFSET TUBULAR DOOR PULL1-1/4" Diameter pull bar with 1-1/4" Diameter mounting postsAvailable sizes: 19-3/16" Substrate SelectionsFinish 630 and 631 is for an Stainless Steel substrateAll other finishes are for a Brass substrateIVES...

919 DECORATIVE FLUSH PULL - OVALContoured for ease of pulling;Packaged with fasteners for wood applications. Surface: 6 X 3/4" OH PH.IVES DECORATIVE FLUSH PULLS OVERVIEWFlush pulls help maximize the space-saving benefits derived from installing sliding...

955 DECORATIVE FLUSH PULL - SQUARE, DEEP WELLFeatures a finger pocket for ease of pulling;Packaged with fasteners for wood applications. Exposed 6 X 3/4" FH PH.IVES DECORATIVE FLUSH PULLS OVERVIEWFlush pulls help maximize the space-saving benefits...

Ives VR810-DT/VR814-DT Vandal Resistant Dummy Trim (with and without black grip)Closed pull design eliminates a hooking point to be able to forcibly pull a secured door open;Ligature resistant design;For use with Falcon XX, 18 or 25 Series exit...

VR900/VR904Closed pull design eliminates a hooking point to be able to forcibly pull a secured door open;Ligature resistant design;For use with most mortise locks on outswinging doors including Schlage L9000 Series with interior L or N escutcheon, and...

VR910M-DT/VR910M-DTClosed pull design eliminates a hooking point to be able to forcibly pull a secured door open;Ligature resistant design;For use with Von Duprin 9875/9975 mortise lock exit device;Built-in lock protector prevents...

Omnia 1969P Modern Appliance/Door Pull, Forged Solid Brass, 1-3/4" Projection Product Overview Modern Appliance/Door Pull – Forged Solid Brass Striking solid brass cabinet and appliance/door pulls that are forged and precision machined in Italy. In...

Omnia 9009 Modern Appliance/Door Pull, Solid Brass Product Overview The Omnia Collection is manufactured of solid brass which leaves lasting beauty and richness of finish and endurance. You will find that Omnia offers many different designs that have...

ROCKWOOD 84 Push Plate – .050" Thick Material: Stainless steel; Finishes: US32D; Fastner: #6 x5/8" OH SMS; Options:  Specify handing (right handing shown) Variations of design can be created to fit your requests Plate may be mated with most...

ROCKWOOD 872 Cast Flush Pull Material: Cast brass; Finishes: US10B; Fastner: 2 ea. #4 x 5/8" OH WS   ROCKWOOD OVERVIEW   Rockwood products are normally used on all types of institutional buildings, offices, retail, educational, detention,...

ROCKWOOD 94L Flush Pull Material: Stainless steel; Finishes: US32D; Fastner: 1/4- 20 x 1-1/2" thru bolt & finish washer (standard 1-3/4" door). Features: Includes lugs for thru bolt. No fasteners on pull side Options: TORX – security Torx...

ROCKWOOD Series 47 Offset Single Bar Sets Material: Aluminum, brass, bronze, stainless steel; Finishes: Available in standard architectural finishes; Options: Engraving “PUSH” or “PULL”. Specify handing Base plates available...

ROCKWOOD SD1230 Standard Duty Protector Bars Material: Stainless steel; Finishes: US32D; Fastner:#10-24 x 1 FH MS and sex bolt   ROCKWOOD OVERVIEW   Rockwood products are normally used on all types of institutional buildings, offices, retail,...

TRIMCO 1191 OFFSET GRIPS OVERVIEW Trimco’s Offset Grips are a great compliment to any building design. These grips are offered in 3/4″ to 1-1/4″ round stainless steel, bronze, brass or aluminum and in most architectural finishes to...

TRIMCO 1896-4B PUSH/PULL PLATE OVERVIEW 1896-4B Push/Pull Plate. Push/Pull Plate 4" x 16" Grip 10" CC 1" dia with Rounded Bevel Top & Bottom Edges. The 1894/1895 Heavy Duty Combo Push/Pull Plate Sets are clean looking with no screw mountings on the...