Metallics

10 x 1-1/2 in. Pan Head Tri-Drive Tapping Screws - Steel Zinc - 100qty Features Steel Zinc Material 10 Diameter, 1-1/2" Length Pan head with slotted, Phillips and square Drive Made in the USA

Nuts 3/8-16 Stamp Wing Nut St-zn (Jar 100) Additional Notes Other sizes and quantities available by request, Does not specify dimensions for #4, 7/16 and 1/2 inch diameter type-D stamped wing nuts...

6 x 1/2 in. Pan Head Tri-Drive Tapping Screws - Steel Zinc - 100qty Features Steel Zinc Material Pan head with slotted, Phillips and square Drive Made in the USA 6 Diameter, 1/2" Length

12 x 1-1/2 in. Pan Head Square Drive Tapping Screws - Steel Zinc - 100qty Features Pan head with square Drive 12 Diameter, 1-1/2" Length Steel Zinc Material Additional Notes Other sizes and...

Anchor 1/2 x 2-3/4 Wedge Ancr 316-SS (Jar 25)

4 x 5/8 in. Pan Head Combo Sharp Point Tapping Screws - Steel Zinc - 100qty Features Pan head with Phillips and slotted Drive Steel Zinc Material 4 Diameter, 5/8" Length Additional Notes Other...

10 x 3/4 in. Pan Head Square Drive Tapping Screws - Steel Zinc - 100qty Features Pan head with square Drive Steel Zinc Material 10 Diameter, 3/4" Length Additional Notes Other sizes and...

Washers 3/8 X 1-1/2 Fender SS (Jar 100) Special Features Features: A Larger Diameter for Greater Bearing Surface

8 x 1/2 in. Flat Head Phillips Tapping Screws - 18-8 Stainless - 100qty Features Fastening stainless steel parts to aluminum or steel can cause a type of corrosion known as a galvanic couple in some...

8 x 1/2 in. Pan Head Phillips Sharp Point Tapping Screws - Steel Zinc - 1000qty Features Steel Zinc Material 8 Diameter, 1/2" Length Pan head with Phillips Drive Additional Notes Other sizes and...

12 x 1/2 in. Flat Head Phillips Tapping Screws - Steel Zinc - 100qty Additional Notes Other sizes and quantities available by request | Dimensions for #9 diameter are independent of ASME B18.6...

Anchors 5/8 X 3-1/2 Wdg SS (Jar 25)

Anchors 500 3/8 x 2-1/4 Wdg SS (Jar 100)

10 x 1-1/4 in. Pan Head Phillips Sharp Point Tapping Screws - Steel Zinc - 100qty Features Pan head with Phillips Drive 10 Diameter, 1-1/4" Length Steel Zinc Material Additional Notes Other sizes...

14 x 1-1/2 in. Flat Head Phillips Tapping Screws - Steel Zinc - 100qty Additional Notes Other sizes and quantities available by request | Dimensions for #9 diameter are independent of ASME B18.6...

Anchors 125 1/2 x 4-1/4 Wdg SS (Jar 25)

8 x 2-1/2 in. Pan Head Phillips Sharp Point Tapping Screws - Steel Zinc - 100qty Additional Notes Other sizes and quantities available by request | Dimensions for #9 diameter are independent of ASME...

Anchors Wedge 5/8" x 4-1/2" Trd Lgth 2-7/8" SS (Jar 25)

Washers 1/4 USS Flat SS (Jar 100)

8 x 1 in. Pan Head Square Drive Tapping Screws - 18-8 Stainless - 100qty Features Fastening stainless steel parts to aluminum or steel can cause a type of corrosion known as a galvanic couple in...