Shop All Klein Tools

Pocket Knife Steel 2-1/4" Coping Blade Features Compact and lightweight. Coping-type blade 2-1/4'' (57 mm) long. Ideal for skinning small wire and cable.

3 Blade Pocket Knife with Screwdriver Features Blades are constructed from durable carbon steel Standard spearpoint blade to 2-1/2-Inch (64 mm) long Screwdriver blade locks open Curved-sheepfoot skinning blade to 2-3/8-Inch (60 mm) long Screwdriver-tip...

Sheepfoot Pocket Knife and Screwdriver Features Screwdriver-tip blade - 2-1/2'' (64 mm) long. Screwdriver blade locks open. Curved-sheepfoot slitting blade - 2-3/8'' (60 mm) long.

Cable Skinning Hook Blade with Notch Features Hook Blade, Notch, and Ring Comfortable textured handle with finger grooves and guard Notch on blade back for scraping or removing wire insulation No contact between stainless steel ring and hardened steel...

Lineman's Skinning Knife with Hook Blade and Notch Warnings Never use on or near live electrical circuits. Check local law on the legality of selling, carrying, or possessing this knife. Always wear approved eye protection. Features Hook Blade and...

Lineman's Skinning Knife, Insulated Features VDE certified Made in USA Tough, tempered steel blade provides maximum sharpness and durability to withstand frequent cable scoring Replaces Catalog Number 1571-3LR-INS Large molded handle for an easier, more...

Klein Kurve® Skinning Knife Warnings Always wear approved eye protection. NOT insulated. Will NOT protect against electrical shock. Check local law on the legality of selling, carrying, or possessing this knife. Never use on or near live circuits...

Haven's® Cable Grip 0.25-Inch Capacity Features Made in USA Works with Messenger and Guy Strand cable diameter range of 0.06-Inch to 0.25-Inch (1.52 mm - 6.35 mm) Gripping pressure of the knurled jaw is applied to 1/4-Inch (6.35 mm) cable...

Haven's® Cable Grip 0.5-Inch Capacity Features Rigorously tested and pulled to rated load to ensure the highest quality and reliability Individually hand inspected and actuated for proper function Gripping pressure of the knurled jaw is applied to...

Haven's® Grip with Swing Latch Warnings Grips are to be used for temporary installation, not for permanent anchorage. When used on/near energized lines, ground, insulate, or isolate grip before pulling. Do not exceed rated capacity. Always match proper...

Grip for Weatherproof Wire 0.40-Inch Capacity Warnings Do not exceed rated capacity. Grips are to be used for temporary installation, not for permanent anchorage. Before each use, clean jaw area and inspect grip for proper operation to avoid slippage...

Grip for Weatherproof Wire 0.53-Inch Capacity Warnings When used on/near energized lines, ground, insulate, or isolate grip before pulling. Do not exceed rated capacity. Always match proper size and type of grip to application. Before each use, clean...

Grip for Weatherproof Wire 0.74-Inch Capacity Note Due to various types of weatherproof coatings available, selection of proper grips is determined by outside diameter of cable Features Made in USA Weatherproof Works on 0.53 to 0.74-Inch (13.46 to 18...

Chicago® Grip for Weatherproof Wire Note Due to various types of weatherproof coatings available, selection of proper grips is determined by outside diameter of cable Features Weatherproof Notches in jaw provide firm grip on insulation Works with 0...

Chicago® Grip for Bare Wire Warnings Always match proper size and type of grip to application. When used on/near energized lines, ground, insulate, or isolate grip before pulling. Grips are to be used for temporary installation, not for permanent...

Chicago® Grip for Bare Copper Wire Warnings Grips are to be used for temporary installation, not for permanent anchorage. When used on/near energized lines, ground, insulate, or isolate grip before pulling. Always match proper size and type of grip to...

Grip for High Strength Cables 0.37-Inch Features Double ''V'' grooves give four-point contact, reducing chance of slipping and providing proper alignment of wire and cable Works with aircraft, EHS, messenger and guy strand cable Sawtooth profile...

Chicago® Grip with Latch 0.37-Inch Cable Features For larger conductors, see our grips with round inside-jaw contour Sawtooth profile provides extra gripping power Double V grooves give four-point contact, reducing chance of slipping and providing...

Chicago® Grip Hot Latch for Copper Wire Warnings When used on/near energized lines, ground, insulate, or isolate grip before pulling. Before each use, clean jaw area and inspect grip for proper operation to avoid slippage. Do not exceed rated capacity...

Haven's® Grip for Wire Rope 0.75-Inch Features Max Safe Load of 8000-Pound (3629 kg) Made in USA Gripping pressure of the knurled jaw is applied to 1/4-Inch (6.35 mm) cable area Designed for use when light, compact grip is desired and where conductor...

Haven's® Grip for Wire Rope 1-Inch Warnings Always match proper size and type of grip to application. When used on/near energized lines, ground, insulate, or isolate grip before pulling. Before each use, clean jaw area and inspect grip for proper...

Haven's® Grip Wire Pulling Tool, 1-1/4-Inch Warnings When used on/near energized lines, ground, insulate, or isolate grip before pulling. Always match proper size and type of grip to application. Grips are to be used for temporary installation, not for...

Haven's® Grip for Wire Rope 0.88-Inch Features Swing latch helps hold cable in the jaw Designed for use when light, compact grip is desired and where conductor damage is not a factor Made in USA Works on 0.38 to 0.88-Inch (9.65 to 22.35 mm) wire rope...

Grip for High Strength Cables 0.62-Inch Warnings Grips are to be used for temporary installation, not for permanent anchorage. When used on/near energized lines, ground, insulate, or isolate grip before pulling. Do not exceed rated capacity. Before each...