Push/Pull Hardware

DON-JO 70 Push Plate 3-1/2" by 15"Product SpecificationsFinishes: 605, 606, 609, 612, 613, 619, 628, 629, 630Product Type: Push PlateANSI: J301Shelf Pack: 10Length: 15"Width: 3-1/2"

Emtek Westwood Appliance Pull, 12" and 18" Appliance PullsSold as complete set. Includes screws.

Emtek Wilshire 8" Door Pull- May be used separately or with pull plates

CK-23096 TAHOMA HANDLE PULLApplication: ResidentialStyle: TransitionalSeries: 23-Tahoma Collection

ROCKWOOD AP1007 ARM PULL WITH PLATE Material: Stainless steel; Finishes: US32D, US32DMS, US10BE, BSP, WSP; Fastner: #8 x 3/4" OH SMS, 3/8-16 x 2-1/2" thru bolt & finish washer; Features: Groove on backside of pull to comfortably accept forearm...

ROCKWOOD BF158 90�� Offset Door Pulls Material: Aluminum, brass, bronze, stainless steel; Finishes: Available in standard architectural finishes; Fastner: 1/4 - 20 x 2-1/4" thru bolt & finish washer (standard 1-3/4" door); Features: Recommended for...

ROCKWOOD HD2250 Heavy Duty Protector Bars Material: Stainless steel; Finishes: US32D; Fastner: 1/4 - 20 x 2-1/4" thru bolt & finish washer (standard 13/4" door*) Other: Made to order sizes available   ROCKWOOD OVERVIEW   Rockwood products...

ROCKWOOD SD1250 Standard Duty Protector Bars Material: Stainless steel; Finishes: US32D; Fastner:#10-24 x 1 FH MS and sex bolt   ROCKWOOD OVERVIEW   Rockwood products are normally used on all types of institutional buildings, offices, retail,...

1001 HEAVY DUTY PUSH PLATE WITH CUT FOR CYLINDER OPTION Trimco’s 1001 Series Push Plates are manufactured in the United States from .050″ thick stainless steel, brass, bronze or aluminum. All push plates are pencil beveled on all four edges...

TRIMCO 1195 STRAIGHT GRIP OVERVIEW Trimco’s Straight Grips offer a wide variety of products to fit most any application. Material options include 1/2″ dia. up to 1-1/4″ dia. round, 3/4 round and half-round offered from 6″ to...

TRIMCO AP423 1-1/4" DIAMETER ARCHITECTURAL LADDER PULL OFFSET STANDOFFS SQUARE ENDS OVERVIEW AP423 1-1/4" Diameter Architectural Ladder Pull Offset Standoffs Square Ends. 1-1/4" Diameter Offset Standoffs Square Ends. Trimco’s AP400 Series Ladder...

DON-JO 1150 Door Pull, 90 degrees Offset, 2-1/2" Projection, 3/4" Diameter, 1-3/4" ClearanceProduct SpecificationsFinishes: 605, 613, 628, 629, 630Product Type: Door PullANSI: J402Shelf Pack: 1Offset 90 degreesProjection 2-1/2"CTC 8", 10", 12"Diameter:...

DON-JO 7011 Pull Plate with Round PullProduct SpecificationsFinishes: 605, 606, 613, 628, 629, 630Product Type: Pull PlateANSI: J405Shelf Pack:...

Emtek Bar Appliance Pull, 12" and 18" Appliance PullsSold as complete set. Includes screws.

Emtek Lost Wax Cast Bronze Twist 8" Door Pull

Emtek Westridge Appliance Pull

ROCKWOOD 107 Door Pulls Material: Stainless steel; Finishes: UD32D; Fastner: 1/4 - 20 x 2-1/2" thru bolt & finish washer (standard 1-3/4" door); Options: Back to back mounting in pairs — use BTB suffix and mounting type number...

ROCKWOOD 130 Cast Door Pull Material: Cast aluminum, brass, stainless steel; Finishes: UD26D; Fastner:1/4 - 20 x 2-1/4" thru bolt & finish washer (standard 13/4" door); Features: Advise if door thickness is other than 1-3/4" See page B13 for...

ROCKWOOD 70 Push Plate, Standard Gauge 0.050 Material: Stainless steel; Finishes: US32D; Fastner: #6 x5/8" OH SMS; Features: Four beveled edges; Options:  Custom sizes available upon request TEK – self-drilling screws TORX – security...

ROCKWOOD HD2230 Heavy Duty Panic Bar Protector Material: Stainless steel; Finishes: US32D; Fastner: 1/4 - 20 x 2-1/4" thru bolt & finish washer (standard 13/4" door*) Other: Made to order sizes available   ROCKWOOD OVERVIEW   Rockwood...

ROCKWOOD R111LPB Trim Protector Bars – Lever Handle Material: Stainless steel; Finishes: US32D; Fastner: 1/4 - 20 x 2-1/4" thru bolt, 1/4 - 20 x 2" thru bolt, finish washers(standard 1-3/4" door*) Other: Made to order sizes...

TRIMCO 1013 3/4” ROUND HEAVY DUTY PULL PLATE OVERVIEW The Trimco 1013 Series Pull Plates combine the 1001 Series Plate with an 1193 Series Grip. These ADA compliant pull plates are available in 3-1/2″x15″ and 4″x16″ standard...

TRIMCO 1018 3/4" DIAMETER  HEAVY DUTY PULL PLATE OVERVIEW The Trimco 1018 Series Pull Plates combine the 1001 Series Plate with an 1195 Series Grip. These ADA compliant pull plates are available in 3-1/2″x15″ and 4″x16″...

TRIMCO 1894-4B ULTIMATE RESTROOM PUSH/PULL PLATE COMBO OVERVIEW 1894-4B Ultimate Restroom Push/Pull Plate Combo. Push/Pull Plate Combo 4" x 16" with 3/4" dia. 8" CTC Pull Rounded Bevel Top & Bottom Edges. The 1894/1895 Heavy Duty Combo Push/Pull...