Accessories

The IXW-MA is a multi-purpose adaptor for the IX Series with 4 contact inputs and 10 relay outputs. The inputs on the IXW-MA can be used to send a command to a specific station to perform a task. The IXW-MA relays are associated to a specific station...

The IXW-MA-SOFT is a multi-purpose adaptor with licenses for 1, 5, or 10 IX-SOFT installations. The IXW-MA-SOFT comes with 4 contact inputs and 10 relay outputs. The inputs on the adaptor can be used to send a command to a specific station to perform...

FEATURES Extends wiring distance from door stations to master stations up to max. 820′ SPECIFICATIONS Capacity: One adaptor unit for each video door station located beyond the standard specified wire distance Mounting: DIN rail...

The JK-MB is a Mullion Mounting Bracket for installing the JK-DV, JF-DV, or JO-DV video door station onto a mullion style door frame. The JK-MB can be installed on either side of the door. FEATURES Mounts JF-DV, JO-DV, or JP-DV to a door frame...

The JOW-2D is an adaptor for the JO Series video intercom system. It allows two video door stations to be used in a standard or app-enabled system. The adaptor has inputs for two JO Series video door stations and outputs to control door release for...

The JP-8Z is a distribution adaptor for the JP Series. The adaptor is utilized when homerun wiring is desired. The JP-4MED master station and each JP-4HD sub master station will connect to this adaptor using CAT-5e/CAT-6 cable. The JP-8Z can surface...

The JPW-BA is a long distance / CCTV adaptor for the JP Series. Used as a long distance adaptor, it will allow the distance to the video door station to be extended to up to 980’. Used as a CCTV adaptor, it will allow for an analog CCTV camera...

FEATURES Stainless steel construction Weather resistant for outdoor use Can be added to any existing KB-DAR or KB-DAR-M video door station SPECIFICATIONS Mounting: Surface mount direct to wall Package Contents KA-DGR Housing 3 x...

The KMB-45 is a 45° angle Mullion Mounting Bracket for installing Aiphone 1-gang audio and video door stations onto a mullion style door frame. The KMB-45 can be installed on either side of the door. FEATURES Compatible with Aiphone 1-gang...

FEATURES Remote terminal box for wire organization to LEF masters mounted on a table or desk Compact size User friendly for all operators for easy setup and installation SPECIFICATIONS Dimensions : 4-3/4" H x 2-3/4" W x 1-3/16" D

FEATURES Used for turning on an auxiliary light to spotlight a caller at the entrance Light is illuminated when the door call button is pushed and during visual monitoring mode SPECIFICATIONS Contact Rating: Dry closure contact for...

The MB-RF1 is retrofit mounting box to install Aiphone emergency station into existing tower. FEATURES Mounting bracket to retrofit IX and IS Rescue Assistance stations to existing 3rd party towers and emergency boxes Compatible with Code...

  FEATURES Can be used with any Aiphone system with paging ability (see specifications for requirements) 3 channel inputs Wide frequency response with very low distortion Balanced microphone input Phantom power on MIC input with selector...

The NHR-4A/A Dual Bulb Corridor Lamp provides light annunciation outside of a patient room when a call has been placed from either the bedside call cord or bathroom pull cord in that room. FEATURES Amber lamp for bedside call, red lamp for...

  FEATURES Button activates routine call at master Cord-out activates urgent call at master Latching call button – call must be reset at patient station

  FEATURES Activates routine call at master station and steady white corridor lamp High impact protection, designed for 1 million uses Withstands 25,000 volts of electrostatic discharge (ESD) 1/4 inch phone jack plugs into patient...

The NHX-30G 30-Station Add-on Selector expands the CommuniCare system to its maximum capacity of 80 stations. With a simple connection to the NHX-50M, the 80-call master station remains streamline and compact in size. The NHR-30K Expansion Trunk...

FEATURES For use with NI-SB microphone for 2-way communication with NIM master station Call-in LED Indoor use Flush mount in ceiling SPECIFICATIONS Communication: Hands-free (receive) Material: ABS plastic Mounting: Ceiling flush...

FEATURES Bedside sub station with call-in and communication with NIM master station Handheld or clips to bed SPECIFICATIONS Communication: Hands-free Material: Plastic Mounting: Hang from hook on NIR-HPF Wire Type: Sub Station to...

FEATURES For use with NI-LB speaker for 2-way communication with NIM master station Stainless steel panel Hands-free reply when connected with NI-LB Indoor use Flush mount in ceiling SPECIFICATIONS Communication: Hands-free...

FEATURES Data collection and charting of calling and answering activity on the NIM system Includes RS-232 cable SPECIFICATIONS Software OS: Windows® 7 (32/64 bit), or Windows® 8 (32/64 bit), Windows® 10 Processor:...

  SPECIFICATIONS Power Source: Supplied by Master Station Material: Fire resistant ABS plastic Mounting NIR-2, NIR-4, NIR-4S, NIR-7W, NIR-7HW: flush mount with 1-gang box NIR-4BZ, NIR-42: flush mount with 2-gang box NIR-31, NIR-32,...

FEATURES Flush mount (fits 1-gang box) SPECIFICATIONS Material: Fire resistant ABS plastic Mounting: Flush mount with 1-gang box

FEATURES Flush mount (fits 1-gang box) SPECIFICATIONS Material: Fire resistant ABS plastic Mounting: Flush mount with 1-gang box